沙尘天气等对西安市空气污染影响的研究

通过对西安市1981—2000年TSP、SO2和NOx年平均浓度资料,1998—2000年周报和日报环境监测资料以及相应的地面、高空常规气象观测资料的统计分析,研究了该市空气污染的时间变化特点以及沙尘天气等几种气象条件对其浓度变化的影响。结果表明:(1)颗粒污染物(TSP和PM10)是西安市的首要污染物,其次是SO2。1981—2000年期间,TSP年平均浓度降低了75%,SO2年平均浓度降低了77%,NOx年平均浓度总体上变化不大;这三种污染物月平均浓度的年变化都呈单周期型,冬季1月份最高,夏季最低(TSP是7月份最低,SO2和NOx是8月份最低)。(2)2001年春季3～4月份沙尘天气的频繁发生,使西安市空气污染日出现全年的第二个多发期(23d·月-1),这有别于正常年份仅在冬季1月份出现一个浓度峰值的特点;强沙尘暴天气过程会使西安市PM10浓度在非常短的时间内提高3倍左右,造成严重的颗粒物污染。(3)西安市冬半年出现轻度污染以上级别的几率明显大于夏半年。影响西安市的地面天气系统可归纳为12类,当受不同天气系统控制时,其污染状况会有较大差异。(4)西安市一年四季都有逆温存在,100m平均逆温强度为0.90℃;全年以低层逆温出现日数最多,但冬季贴地逆温出现日数最多,厚度最厚,强度最大,是造成西安市冬季空气污染严重的最重要气象因素之一。(5)西安     

Relationship between solar radiation and the development and morphology of small cirque glaciers (Maladeta Mountain massif, Central Pyrenees, Spain)

Abstract Spatial and temporal variations in radiative fluxes influence glacier mass‐balance in mountain areas. The primary goal of this study was to assess differences in solar radiation on three glacial cirques located in the Maladeta Mountain massif (Central Spanish Pyrenees), and analyse their implications on glacier development and morphology. A quantitative approach is adopted to obtain the values of solar radiation (direct, diffuse and global radiation), combining several field data parameters (measured at 55 control‐points) with the solar radiation modelling package Ecosim. The data obtained confirm that the morphologies of the glacial bodies developed in the three cirques have a good correlation with the spatial variation on solar radiation inputs, favouring also the conservation (Aneto and Coronas cirques) or total vanishing (Llosás cirque) of the glacial remnants analysed here. The study shows how strongly in this Alpine‐Mediterranean context solar radiation — firstly as a function of latitude and time of year, and locally as a function of topographic slope, aspect and shadowing — controls the mass‐balance and the spatial distribution of melting in small glaciers, having an effect on the development of their morphologies.     

电子地图中线状要素移动注记关键问题研究

探讨了电子地图移动注记的几个关键问题 ,提出了将分段注记和移动注记相结合的思想 ,并在此基础上提出了采用回溯法解决注记之间的冲突 ,从而较好地解决了图幅移动之后某些屏幕内线状要素注记不可见或表达模糊的问题 ,实现了注记输出的完整性和美观性的统一 ,提高了图形输出的效率 ,节省了存储空间 ,在实际应用中取得了较好的效果 ,充分体现了电子地图在线状要素注记显示这一环节的优越性     

西安市冬季冷暖的历史演变对采暖的影响

本文针对CAPPS2.0系统在业务化自动运行过程中的一些问题,提供了一套具体可行的解决方案,实现了CAPPS系统的全自动运行,具有很高的实用价值。     

侯马市酸雨概况及其气象条件分析

通过对侯马近14a酸雨观测资料分析,发现侯马出现酸雨的概率较大,强度较强,时间变化特征明显,与气象条件关系密切。     

关于数字化记录中前兆信号的分析

介绍了如何用MATLAB工具软件—小波分析的基本理论对数字信号进行数字滤波,着重分析和研究了呼和浩特地震台形变观测资料出现各种信号,提出了小波分析理论对台站实际工作的重要性。     

Discharge‐sediment processes of the Zhadang glacier on the Tibetan Plateau measured with a high frequency data acquisition system

In high elevation cold regions of the Tibetan Plateau, suspended sediment transfer from glacier meltwater erosion is one of the important hydrological components. The Zhadang glacier is a typical valley‐type glacier in the Nyainqentanglha Mountains on the Tibetan Plateau. To make frequent and long period records of meltwater runoff and sediment processes in the very high elevation and isolated regions, an automatic system was installed near the glacier snout (5400 m a.s.l) in August 2013, to measure the transient discharge and sediment processes at 5‐min interval, which is shorter than the time span for the water flow to traverse the catchment from the farthest end to the watershed outlet. Diurnal variations of discharge, and suspended sediment concentration (SSC) were recorded at high frequency for the Zhadang glacier, before suspended sediment load (SSL) was computed. Hourly SSC varied from the range of 0.2 kg/m³ to 0.5 kg/m³ (at 8:00–9:00) to the range of 2.0 kg/m³ to 4.0 kg/m³ (at 17:00–18:00). The daily SSL was 32.24 t during the intense ablation period. Hourly SSC was linearly correlated with discharge (r = 0.885**, n = 18, p < 0.01). A digit‐eight hysteresis loop was observed for the sediment transport in the glacier area. Air temperature fluctuations influence discharge, and then result in the sediment variations. The results of this study provide insight into the responses of suspended sediment delivery processes with a high frequency data in the high elevation cold regions. Copyright © 2016 John Wiley & Sons, Ltd.     

An examination of snow redistribution over smooth land‐fast sea ice

An understanding of temporal evolution of snow on sea ice at different spatial scales is essential for improvement of snow parameterization in sea ice models. One of the problems we face, however, is that long‐term climate data are routinely available for land and not for sea ice. In this paper, we examine the temporal evolution of snow over smooth land‐fast first‐year sea ice using observational and modelled data. Changes in probability density functions indicate that depositional and drifting events control the evolution of snow distribution. Geostatistical analysis suggests that snowdrifts increased over the study period, and the orientation was related to the meteorological conditions. At the microscale, the temporal evolution of the snowdrifts was a product of infilling in the valleys between drifts. Results using two shore‐based climate reporting stations (Paulatuk and Tuktoyuktuk, NWT) suggest that on‐ice air temperature and relative humidity can be estimated using air temperature recorded at either station. Wind speed, direction and precipitation on ice cannot be accurately estimated using meteorological data from either station. The temporal evolution of snow distribution over smooth land‐fast sea ice was modelled using SnowModel and four different forcing regimes. The results from these model runs indicate a lack of agreement between observed distribution and model outputs. The reasons for these results are lack of meteorological measurements prior to the end of January, lack of spatially adequate surface topography and discrepancies between meteorological variables on land and ice. Copyright © 2009 John Wiley & Sons, Ltd.     

Sensitivity of soil parameters in unsaturated zone modelling and the relation between effective,laboratory and in situ estimates

Simulation of soil moisture content requires effective soil hydraulic parameters that are valid at the modelling scale. This study investigates how these parameters can be estimated by inverse modelling using soil moisture measurements at 25 locations at three different depths (at the surface, at 30 and 60 cm depth) on an 80 by 20 m hillslope. The study presents two global sensitivity analyses to investigate the sensitivity in simulated soil moisture content of the different hydraulic parameters used in a one‐dimensional unsaturated zone model based on Richards' equation. For estimation of the effective parameters the shuffled complex evolution algorithm is applied. These estimated parameters are compared to their measured laboratory and in situ equivalents. Soil hydraulic functions were estimated in the laboratory on 100 cm³ undisturbed soil cores collected at 115 locations situated in two horizons in three profile pits along the hillslope. Furthermore, in situ field saturated hydraulic conductivity was estimated at 120 locations using single‐ring pressure infiltrometer measurements. The sensitivity analysis of 13 soil physical parameters (saturated hydraulic conductivity (K_s), saturated moisture content (θ_s), residual moisture content (θ_r), inverse of the air‐entry value (α), van Genuchten shape parameter (n), Averjanov shape parameter (N) for both horizons, and depth (d) from surface to B horizon) in a two‐layer single column model showed that the parameter N is the least sensitive parameter. K_s of both horizons, θ_s of the A horizon and d were found to be the most sensitive parameters. Distributions over all locations of the effective parameters and the distributions of the estimated soil physical parameters from the undisturbed soil samples and the single‐ring pressure infiltrometer estimates were found significantly different at a 5% level for all parameters except for α of the A horizon and K_s and θ_s of the B horizon. Different reasons are discussed to explain these large differences. Copyright © 2004 John Wiley & Sons, Ltd.     

FBX三维模型自动转换为OBJ三维模型方法研究

本文研究实现了一种FBX三维模型自动转换为OBJ三维模型的方法,包括几何信息和材质信息的自动转换,所述方法包括获取数据、几何信息处理、材质信息处理、OBJ格式输出和材质库文件输出等步骤。