Alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands)

Ancient fluvial successions often act as hydrocarbon reservoirs. Sub‐surface data on the alluvial architecture of fluvial successions are often incomplete and modelling is performed to reconstruct the stratigraphy. However, all alluvial architecture models suffer from the scarcity of field data to test and calibrate them. The purposes of this study were to quantify the alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands) and to determine spatio‐temporal trends in the architecture. Five north–south orientated cross‐sections, perpendicular to the general flow direction, were compiled for the fluvial‐dominated part of the delta. These sections were used to calculate the width/thickness ratios of fluvial sandbodies (SBW/SBT) and the proportions of channel‐belt deposits (CDP), clastic overbank deposits (ODP) and organic material (OP) in the succession. Furthermore, the connectedness ratio (CR) between channel belts was calculated for each cross‐section. Distinct spatial and temporal trends in the alluvial architecture were found. SBW/SBT ratios decrease by a factor of ca 4 in a downstream direction. CDP decreases from ca 0·7 (upstream) to ca 0·3 (downstream). OP increases from less than 0·05 in the upstream part of the delta to more than 0·25 in the downstream delta. ODP is approximately constant (0·4). CR is ca 0·25 upstream, which is approximately two times larger than in the downstream part of the delta. Furthermore, CDP in the downstream Rhine–Meuse delta increases after 3000 cal yr BP. These trends are attributed to variations in available accommodation space, floodplain geometry and channel‐belt size. For instance, channel belts tend to narrow in a downstream direction, which reduces SBW/SBT, CDP and CR. Tectonics cause local deviations in the general architectural trends. In addition, the positive correlation between avulsion frequency and the ratio of local to regional aggradation rate probably influenced alluvial architecture in the Rhine–Meuse delta. The Rhine–Meuse data set can be a great resource when developing more sophisticated models for alluvial architecture simulation, which eventually could lead to better characterizations of hydrocarbon reservoirs. To aid such usage of the Rhine–Meuse data set, constraints for relevant parameters are provided at the end of the paper.     

Electromagnetic signals associated with stick–slip of quartz-free rocks

We recorded clear transients in the electric and magnetic fields upon sudden slip in stick–slip experiments on dry, cylindrically shaped, quartz-free rock specimens of basalt and peridotite with a 30° saw-cut (representing a fault) at confining pressures of up to 120 MPa. The amplitudes of the measured electric field signals were always higher at the electrode pair oriented parallel to the strike of the fault than at the pair oriented perpendicular. This anisotropy suggests a preferred electric polarization normal to the slip surface. The transients in the electric and magnetic fields were observed only when the fault slip occurred by stick–slip mode, not by a stable mode of the sliding, and the amplitudes of the electric field signals increased with increasing stress drop. It is suggested that the generation process of the electromagnetic signals is closely related to the characteristic behavior of the fault at the time of the initiation of slip during stick–slip events, probably with respect to the intensity of the signals. We propose that one or both of the following two processes characteristic of the fault at the time of the initiation of slip during stick–slip events are essential for the generation of detectable electromagnetic signals: rapid slip along the simulated fault and separation of the rock masses across the fault.     

Landslide susceptibility mapping for a landslide-prone area (Findikli,NE of Turkey) by likelihood-frequency ratio and weighted linear combination models

Landslides are very common natural problems in the Black Sea Region of Turkey due to the steep topography, improper use of land cover and adverse climatic conditions for landslides. In the western part of region, many studies have been carried out especially in the last decade for landslide susceptibility mapping using different evaluation methods such as deterministic approach, landslide distribution, qualitative, statistical and distribution-free analyses. The purpose of this study is to produce landslide susceptibility maps of a landslide-prone area (Findikli district, Rize) located at the eastern part of the Black Sea Region of Turkey by likelihood frequency ratio (LRM) model and weighted linear combination (WLC) model and to compare the results obtained. For this purpose, landslide inventory map of the area were prepared for the years of 1983 and 1995 by detailed field surveys and aerial-photography studies. Slope angle, slope aspect, lithology, distance from drainage lines, distance from roads and the land-cover of the study area are considered as the landslide-conditioning parameters. The differences between the susceptibility maps derived by the LRM and the WLC models are relatively minor when broad-based classifications are taken into account. However, the WLC map showed more details but the other map produced by LRM model produced weak results. The reason for this result is considered to be the fact that the majority of pixels in the LRM map have high values than the WLC-derived susceptibility map. In order to validate the two susceptibility maps, both of them were compared with the landslide inventory map. Although the landslides do not exist in the very high susceptibility class of the both maps, 79% of the landslides fall into the high and very high susceptibility zones of the WLC map while this is 49% for the LRM map. This shows that the WLC model exhibited higher performance than the LRM model.     

Estimating potential landslide sites of an upland sub-watershed in Western Ghat’s of Kerala (India) through frequency ratio and GIS

The purpose of this study is to assess the susceptibility of landslides in parts of Western Ghats, Kerala, India, using a geographical information system (GIS). Landslide inventory of the area was made by detailed field surveys and the analysis of the topographical maps. The landslide triggering factors are considered to be slope angle, slope aspect, slope curvature, slope length, distance from drainage, distance from lineaments, lithology, land use and geomorphology. ArcGIS version 8.3 was used to manipulate and analyse all the collected data. Probabilistic-likelihood ratio was used to create a landslide susceptibility map for the study area. The result was validated using the Area under Curve (AUC) method and temporal data of landslide occurrences. The validation results showed satisfactory agreement between the susceptibility map and the existing data on landslide locations. As the result, the success rate of the model was (84.46%) and the prediction rate of the model was (82.38%) shows high prediction accuracy. In the reclassified final landslide susceptibility zone map, 5.68% of the total area is classified as critical in nature. The landslide susceptibility map thus produced can be used to reduce hazards associated with landslides and to land cover planning.     

Water and power in Santiago de Chile: Socio-spatial segregation through network integration

The analysis of the history of the management and distribution of electricity, water and sanitation networks in Santiago de Chile throws light on a problem which is central to thinking on the relationship between urban services management and territorial splintering: what is the impact of urban policy, in particular housing policy and urban planning, on access to services and on the potential levels of social segregation and institutional splintering of metropolises?The Chilean example is eminently anchored in its political and institutional history. We shall see, for example, that the authoritarian urban policy of the military government, associated with early liberal reform, enabled the improvement of access to networks in every municipality of the Greater Santiago area. However, this success, leading to the integration by urban services of a large territory, does not signify that networks remained neutral as regards the process of spatial segregation. Inversely, we can defend the theory that the presence of an integrated service was a necessary condition and a reinforcing factor of the process of urban spread and residential segregation. This paradoxical argument is a result of the ambivalent liberal network and urban policies of the military government. Urban expansion was largely sustained by the development of integrated infrastructures and universal services. The processes of liberalising land and urban services were mutually sustaining and provided the necessary conditions for the birth of an extremely intense movement of urban sprawl and segregation between 1985 and 2000.     

Drought and institutional adaptation in the Great Plains of Alberta and Saskatchewan, 1914–1939

Agriculture in the southern Great Plains of Canada has been particularly vulnerable to prolonged episodes of drought. Using climate data and a precipitation minus potential evapotranspiration index, the extent of the region’s exposure to drought is examined. Between 1914 and 1917, the Dry Belt was particularly vulnerable to drought, whereas after 1928, a much larger region known as the Palliser Triangle covering most of southern Alberta and Saskatchewan was much more exposed to drought. These droughts provoked major institutional adaptation, in particular the establishment of the Special Areas Board by the Government of Alberta, and the creation of the Prairie Farm Rehabilitation Administration by the Government of Canada. Both organizations have proved to be relatively permanent public adaptations to the natural hazard of drought in the region. Moreover, these earlier experiences with prolonged drought as well as institution-building may be of value in helping the residents of the Palliser Triangle adapt to predicted climate changes in the future as well as anticipate some of the barriers to effective institutional adaptation.     

新疆北部晚古生代以来中基性岩脉的年代学、岩石学、地球化学研究

新疆北部中基性岩脉K-Ar表观年龄为187～271Ma,岩性以辉长、辉绿岩以及闪长、闪长玢岩为主,属于亚碱性系列.主量元素、稀土元素以及微量元素分析表明,中基性岩脉经历了源区地壳物质的混合以及侵位过程中的分离结晶作用,并在区域分布特点上受部分熔融程度的影响,而且由于结晶分异和部分熔融的不同,还出现了中基性岩脉系列的成分变异.排除上述岩浆作用的干扰,有证据显示岩脉起源于亏损地幔,由于Nd同位素模式年龄tDM集中在363～769Ma,反映源区是一个古生代时期的新生岩石圈地幔,该地幔源区属于大洋岩石圈地幔.新疆北部广泛出露的中基性岩脉在时间和空间上具有多样性,但是在产状、岩性组合和同位素特征上具有相似的特点,指示研究区在古生代以来具有一个相对统一和完整的源区,推测这个源区与北疆地区古生代以来长期存在的残余洋盆及其相关岩石圈有关.     

饱和粉砂不稳定性的试验研究

通过对净砂和级配良好粉砂(含10 %粉土)进行一系列三轴固结不排水试验（CU）,研究了粉土、孔隙比和围压对饱和粉砂不稳定性的影响。试验结果表明,净砂与粉砂在不排水剪切条件下均会出现应变软化现象（即不稳定性）。同一围压下脆性指数(IB)随孔隙比增加,但不稳定线的应力比随孔隙比增加而减小。引用等效粒间孔隙比(ege)后,净砂和粉砂在ege-ln p?平面上拥有基本相同的临界状态线。在临界状态理论及等效粒间孔隙比的基础上,提出在同一修正状态参数(?ge)下净砂和级配良好粉砂有相似的不稳定性。     

塔里木盆地寒武-奥陶系白云岩结构构造类型及其形成机理

塔里木盆地寒武-奥陶系白云岩度大、分布广,是重要的油气储集层.根据岩石学研究并结合地球化学特征将其分为4类,其特点如下:(1)泥晶-粉晶白云岩,白云石晶体小、晶形差,有序度在4类中最低(0.73);Na、K、Sr含量在4类中最高;δ13C值及Z值较高,分别为-0.94‰、122.3;Fe、Mn含量较低;阴极发光为亮桔红色;常呈纹层状,具暴露及成化标志.这些特征表明其结晶较快,形成环境蒸发强烈、盐度较高、氧化性较强,是在萨布哈环境中由浓缩海水发生白云石化所形成.(2)藻纹层白云岩,白云石晶体小,晶形较好,有序度较高(0.85);藻纹层基本保留了其原始微细结构;Na、K、Sr含量较低:δC值在4类中最高,平均为-0.50‰;含有较多黄铁矿.这些特征说明其可能形成于成岩作用的稍早期阶段且其成因与藻类活动密切相关,成岩环境盐度较低,可能是在藻类作用下,由富藻层浓集的镁与残留海水在浅埋藏环境中共同作用所形成.(3)雾心亮边白云岩,白云石普遍具雾心亮边结构,雾心含少量包裹体及灰质残余,亮边则少见或无;阴极发光下,雾心发亮桔黄色光,亮边发光暗或不发光;局部见此类白云石;呈星散状分布于亮晶颗粒灰岩或泥晶灰岩中;白云石晶体较大,晶形较好.此类白云岩的δ13C及Z值在4类中最低,K、Na、Sr、Fe含量相对较低,Mn含量最高;有序度较高,均值为0.83.这些特征表明此类白云岩中白云石的雾心可能是在早期浅埋藏环境中,由富镁孔隙水交代周围灰质所形成;亮边则形成于埋藏较深的环境,其所需镁可能来源于粘土矿物的转化.(4)重结晶白云岩:白云石晶体粗大且污浊,接触紧密;局部见白云石晶体具环带结构,局部见颗粒幻影结构;阴极发光较暗;Fe含量在4类中最高,Mn含量较高;有序度最高,平均为0.95;包裹体均一温度平均为110.2℃.这些特征表明其可能是在还原性较强的深埋藏环境中,由早期形成的白云岩经较强的重结晶作用所形成.     

岩石破坏前后曲线分类及脆-延转换围压研究——蚀变岩常规三轴压缩试验Ⅰ

蚀变岩是工程中少见的软弱岩类,在西南某重大水电工程中,蚀变岩处于工程的重要部位,为保证工程的长期稳定性,对蚀变岩力学特性进行了深入全面的试验研究.通过对孔隙度不同的饱水蚀变岩进行系统的常规三轴压缩试验和总结分析,提出了蚀变岩三轴压缩下破坏前应力.应变曲线可分为3大类,破坏后应力-应变曲线亦可分为3大类的形态模式.并得出结论:蚀变岩的破坏类型受围压与孔隙度的共同影响,在给定的12 MPa围压下蚀变岩以脆性破坏为主,只有孔隙度大于16%且围压大于4 MPa时才有可能进入脆-延转换状态,且脆-延转换围压随孔隙度增加而降低,临界状态应力比随孔隙度增大而增加.