无人机红外传感器改制及数据获取研究

针对云雾复杂气候条件下无人机可见光影像难以获取的问题,文章在分析了地质灾害应急遥感监测伴随的复杂气候条件的基础上,根据目前无人机传感器的构造原理,通过对各种红外滤片的分析和比较,研究基于红外滤片元器件的无人机传感器红外改制技术和红外影像数据增强方法,对航摄传感器进行红外改装。实验结果表明,无人机红外传感器在多云雾条件下能够获取高精度清晰影像,有效解决云雾条件下地质灾害应急数据获取难题,为地质灾害应急决策提供参考。     

Statistical significance of modal parameters of bridge systems identified from strong motion data

Modal parameters of structural systems have commonly been determined using system identification (SI) methods for damage detection and health monitoring. For determining the deterioration of the integrity of structural systems correctly, modal parameters of a healthy structure have to be obtained with adequate certainty so that these parameters can be used as reliable references for the healthy system to compare with those of the damaged system. In this study, the statistical significance of modal parameters identified using strong motion time histories recorded on two bridge structures is assessed. The confidence intervals of identified modal frequencies and damping ratios are obtained using Monte Carlo simulations and sensitivity analyses in conjunction with eigenrealization algorithm. The dependence of the statistical bounds on model parameters is examined. The effect of using different number of sensors on the statistical significance is evaluated using simulated time history data from a validated finite element model of a bridge. Copyright © 2005 John Wiley & Sons, Ltd.     

Rapid delineation of subsurface petroleum contamination using the site characterization and analysis penetrometer system

 The Site Characterization and Analysis Penetrometer System (SCAPS) was used to investigate subsurface petroleum contamination at Aberdeen Proving Ground, Maryland. The SCAPS is a rapid site-screening tool developed by the Tri-Services (U.S. Army, Navy, and Air Force) to reduce the cost of installation restoration activities. The system, consisting of a geophysical cone penetrometer fitted with a laser-induced fluorescence petroleum sensor, is capable of simultaneous, real-time delineation of subsurface stratigraphy and petroleum contamination. Onsite processing of the SCAPS data allows three-dimensional visualization of both subsurface stratigraphy and petroleum contaminant distribution. The site investigation described herein successfully identified three distinct areas of subsurface petroleum contamination caused by leaking underground storage tanks containing No. 2 healing oil. The SCAPS petroleum sensor response was verified by obtaining 20 soil samples and performing onsite and conventional laboratory analyses for petroleum contaminants. Verification sample results indicate a strong correlation between the SCAPS fluorescence data and conventional measures of petroleum contamination. This investigation illustrates the capabilities of the SCAPS for rapid site characterization. Received: 27 November 1995 · Accepted: 11 December 1995     

Laboratory investigations of the thermal strain of frozen soils, using fiber-optic strain gauges based on Bragg gratings

Measurements of the thermal deformations of frozen soil samples were performed in the cold laboratory in temperature range from 0°C to-12°C.Fiber Bragg Gratings strain and temperature sensors were used to measure the deformation and temperature inside the samples.A number of tests with the samples prepared from Kaolin and Cambrian clay saturated with fresh water,and prepared from fine and silt sand saturated with fresh or saline water,are performed.Thermal deformations of the samples are analyzed depending on the cyclic changes of their temperature.     

钻探参数实时采集系统研制与应用

钻探参数实时采集系统研制的目的是向钻探技术及管理人员提供直观的钻探实时参数,通过该系统可全天候的掌握钻探工况。钻探参数采集的方法是通过传感器采集压力、转速、位移、流量、液位等物理参数,使用配套的软硬件设备进行数据转换和处理,在人机交互界面显示直观的工程参数。该系统根据野外现场不同工作环境可以使用互联网、GPRS终端或者北斗卫星终端把现场实时工程数据无线传输至远程服务器上,用户通过手机或电脑即可查看到现场的实时或历史工程数据。采用本系统可以预防和减少钻探事故,为事故处理提供数据支撑,为实现钻探自动化、智能化提供基础数据。     

Field study of set-up effect in open-ended PHC pipe piles

Large-scale field tests were conducted to study set-up effect in open-ended prestressed high-strength concrete pipe piles jacked into stratified soil. Four open-ended prestressed high-strength concrete pipe piles with 13 and 18 m in embedment depth were fully instrumented with fiber Bragg grating sensors and installed. Several restrike dynamic tests were performed on each test pile, with the time interval from 21.5 to 284 hours after installation. Static loading tests (SLTs) were later performed on each test pile at 408 hours after installation to substantiate the dynamic tests. Changes with time in pile bearing capacity and in the shaft and toe resistances were studied based on the results of the pile tests. The development of shaft resistance set-up in different layers was studied in particular. It was found that set-up effect in the shaft resistance is significant and the toe resistance increment was minor. The overall set-up factor of total bearing capacity was found to range from 0.09 to 0.53, and the set-up effect of friction pile is much larger than the end bearing pile. More significant set-up in shaft resistance was observed in fill and alluvium layer. The dimensionless set-up factor A for shaft resistance in marine deposits ranges from 0.5 to 1.43, and it contributes the most to the shaft resistance as the shaft resistance in marine deposits is higher.     

Burying receivers for improved time‐lapse seismic repeatability: CO2CRC Otway field experiment

4D seismic is widely used to remotely monitor fluid movement in subsurface reservoirs. This technique is especially effective offshore where high survey repeatability can be achieved. It comes as no surprise that the first 4D seismic that successfully monitored the CO₂ sequestration process was recorded offshore in the Sleipner field, North Sea. In the case of land projects, poor repeatability of the land seismic data due to low S/N ratio often obscures the time‐lapse seismic signal. Hence for a successful on shore monitoring program improving seismic repeatability is essential. Stage 2 of the CO2CRC Otway project involves an injection of a small amount (around 15,000 tonnes) of CO₂/CH₄ gas mixture into a saline aquifer at a depth of approximately 1.5 km. Previous studies at this site showed that seismic repeatability is relatively low due to variations in weather conditions, near surface geology and farming activities. In order to improve time‐lapse seismic monitoring capabilities, a permanent receiver array can be utilised to improve signal to noise ratio and hence repeatability. A small‐scale trial of such an array was conducted at the Otway site in June 2012. A set of 25 geophones was installed in 3 m deep boreholes in parallel to the same number of surface geophones. In addition, four geophones were placed into boreholes of 1–12 m depth. In order to assess the gain in the signal‐to‐noise ratio and repeatability, both active and passive seismic surveys were carried out. The surveys were conducted in relatively poor weather conditions, with rain, strong wind and thunderstorms. With such an amplified background noise level, we found that the noise level for buried geophones is on average 20 dB lower compared to the surface geophones. The levels of repeatability for borehole geophones estimated around direct wave, reflected wave and ground roll are twice as high as for the surface geophones. Both borehole and surface geophones produce the best repeatability in the 30–90 Hz frequency range. The influence of burying depth on S/N ratio and repeatability shows that significant improvement in repeatability can be reached at a depth of 3 m. The level of repeatability remains relatively constant between 3 and 12 m depths.     

Virtual Australia: its key elements – know,think, communicate

Abstract

Virtual Australia is not a well-defined or agreed concept. This discussion paper conceptualises Virtual Australia as a ‘virtual [digital] model containing and representing all non-trivial objects and their contextual environment – from blue sky to bedrock – in real world Australia’. It describes a scenario for Virtual Australia, one or two decades from now, in which the locations and conditions of non-trivial objects and their environment are updated automatically through a combination of remote sensing and wireless communication technologies in support of a ‘Supranet’. It then examines the concept of the ‘Supranet’ – a pervasive information network based largely on wireless technology linking the physical world to a virtual model in real time – and develops and discusses three principal characteristics of the Supranet: the ability to have or collect specific information (know); the ability to process information (think); and the ability to communicate that information. If, in the near future, any or all non-trivial devices are to some extent able to know, think and communicate, the potential for object autonomy will be realised.     

Sensors,empowerment, and accountability: a Digital Earth view from East Africa

Abstract

Several innovative ‘participatory sensing’ initiatives are under way in East Africa. They can be seen as local manifestations of the global notion of Digital Earth. The initiatives aim to amplify the voice of ordinary citizens, improve citizens' capacity to directly influence public service delivery and hold local government accountable. The popularity of these innovations is, among other things, a local reaction to the partial failure of the millennium development goals (MDGs) to deliver accurate statistics on public services in Africa. Empowered citizens, with access to standard mobile phones, can ‘sense’ via text messages and report failures in the delivery of local government services. The public disclosure of these reports on the web and other mass media may pressure local authorities to take remedial action. In this paper, we outline the potential and research challenges of a ‘participatory sensing’ platform, which we call a ‘human sensor web.’ Digital Africa's first priority could be to harness continent-wide and national data as well as local information resources, collected by citizens, in order to monitor, measure and forecast MDGs.     

基于电磁阻尼的振动能量回收装置研究

针对水平方向振动体的能量回收问题,设计一种基于电磁阻尼的振动能量回收装置,装置主要包括振动台、电磁阻尼器和稳压电路.有别于传统的重力方向上的电磁振动体能量收集装置,水平方向运动的振动台更有利于模拟高层建筑的实际的振动环境;为了减小滑动摩擦带来的能量损耗,设计了基于滚动轴承的电磁阻尼器;针对传统能量回收装置中单个线圈收集...