某地平板玻璃原料用石英砂的提纯研究

某地石英矿砂通过磁选分离法、稀酸浸泡法处理后，矿砂不同程度地降低了铁、铝、钙镁的含量；采用磁选分离 稀酸浸泡法联合处理后，使该地石英砂的化学成分达到了优质的生产平板玻璃用硅质原料的国家标准。     

四川盆地白垩纪沙漠石英沙颗粒表面特征

石英具有较大的硬度和较高的化学稳定性，因而其颗粒表面特征能很好地反映沉积环境。而通过扫描电镜研究石英颗粒表面微细特征是分析沉积环境行之有效的方法。虽然多数人认为四川盆地白垩纪地层存在沙漠沉积(打儿凼组和夹关组)，但仍有人对沙漠沉积的存在持怀疑态度，并认为是河流成三角洲沉积。过去关于其沉积环境的判别主要是根据沉积结构和构造，并未对其石英沙颗粒表面特征进行过系统分析。笔者对采自四川盆地白垩系不同层位地层的样品进行了石英沙颗粒表面特征系统分析。结果表明，石英沙颗粒表面特征分析可以成功地将石英沙区分为风成和水成沉积。因此，本文从石英沙颗粒表面特征方面进一步肯定了四川盆地白垩纪古沙漠的存在。     

论桩基施工中流砂现象处理

地下水流动对土体产生渗透力；当渗透力大于土体的抗剪强度，土体破坏，也就是当施工造成地下水水力坡度超过砂层的临界水力坡度即产生流砂现象．运用水文地质工程地质学方面的原理其处理方法有两类：—是莫尔一库仑法：即c法和φ法；二是临界水力坡度法(Ic法)．     

Determination of silica sand stiffness

Site investigation and evaluation of properties of soil or rock are important aspects of geotechnical design. Determination of the ground stiffness is one of the important parameters in geotechnical engineering. Since the measurement of shear modulus is very sensitive to soil disturbance, especially for sand, determination of the stiffness of soil in the field is more reliable than in laboratory tests on sampled specimens. Measurement of shear modulus is one of the most common applications of self-boring pressuremeter testing. As an in situ device, the pressuremeter provides a unique method for assessing directly the in situ shear modulus of a soil. This paper describes a laboratory study of silica sand stiffness, which varies with stress level and strain amplitude. The results show that the elastic shear modulus value is mainly dependent on the value of the mean effective stress and relative density.     

An experimental investigation of LNAPL migration in an unsaturated/saturated sand

Accidental spills of hydrocarbons, such as Light Non-Aqueous Phase Liquids (LNAPLs), are one of the most common sources of subsurface contamination. Migration of LNAPL in a porous medium is influenced by various factors such as the number of fluids present in the unsaturated/saturated zones and the proportion of pores occupied by each fluid. The results for relationship between matric suction and degree of saturation are presented in this paper for water–air, water–LNAPL and LNAPL–air systems in a sand. A simple and reliable setup using Buchner funnel was designed to obtain these relations. It was found that the relationship between matric suction head and degree of saturation is hysteretic for all the fluid systems (water–air, water–LNAPL and LNAPL–air). Furthermore, the amount of hysteresis depended upon the fluid system, with the maximum hysteresis occurring for water–air system. The results suggest that the amount of trapped air depends upon the reversal degree of saturation from drying to wetting.     

Wave-influenced deltas: geomorphological implications for facies reconstruction

ABSTRACT A process‐based facies model for asymmetric wave‐influenced deltas predicts significant river‐borne muds with potentially lower quality reservoir facies in prodelta and downdrift areas, and better quality sand in updrift areas. Many ancient barrier‐lagoon systems and ‘offshore bars’ may be better reinterpreted as components of large‐scale asymmetric wave‐influenced deltaic systems. The proposed model is based on a re‐evaluation of several modern examples. An asymmetry index A is defined as the ratio between the net longshore transport rate at the mouth (in m³ year^?1) and river discharge (in 10⁶ m³ month^?1). Symmetry is favoured in deltas with an index below ≈ 200 (e.g. Tiber, lobes of the Godavari delta, Rosetta lobe of the Nile, Ebro), whereas deltas with a higher index are asymmetric (e.g. Danube – Sf. Gheorghe lobe, Brazos, Damietta lobe of the Nile). Periodic deflection of the river mouth for significant distances in the downdrift direction occurs in extreme cases of littoral drift dominance (e.g. Mahanadi), resulting in a series of randomly distributed, quasi‐parallel series of sand spits and channel fills. Asymmetric deltas show variable proportions of river‐, wave‐ and tide‐dominated facies both among and within their lobes. Bayhead deltas, lagoons and barrier islands form naturally in prograding asymmetric deltas and are not necessarily associated with transgressive systems. This complexity underlines the necessity of interpreting ancient depositional systems in a larger palaeogeographic context.     

GMS卫星遥感中国地区气溶胶光学厚度

讨论了利用GMS卫星遥感湖面上空气溶胶光学厚度的方法,根据在5个湖面附近与多波段光度计遥感结果的比较,对卫星遥感的方法和结果进行了检验,然后利用该方法遥感了中国大陆25个湖面上空气溶胶光学厚度.结果显示,利用卫星反演湖面光学厚度可以提供大陆上空气溶胶的信息,是研究大陆上空气溶胶光学厚度一个可行的方法.     

粘粒含量对南京粉细砂液化影响的试验研究

南京粉细砂是一种以片状颗粒成分为主的粉细砂，与通常的圆形颗粒石英砂有一定区别，片状颗粒成分使得南京粉细砂具有各向异性的性质。通过对不同粘粒含量的南京粉细砂进行液化试验，分析其试验结果发现：对于粘粒含量ρc＝5％、10％和15％三种情况，在均压固结情况下，当南京粉细砂达到初始液化时，采用变形标准和孔压标准是一致的；而偏压固结时，只能采用变形标准作为南京粉细砂达到初始液化的标准，此时振动孔压仅达到围压的50％-70％。粘粒含量对南京粉细砂的抗液化强度影响很大，随粘粒含量增加，在不同固结比时，其抗液化强度并不是单调变化，而是在粘粒含量ρc＝10％左右处于一个低谷，其抗液化强度最低。     

一次沙尘暴中尺度低压和沙尘输送的数值模拟

利用ＰＳＵ／ＮＣＡＲ中尺度数值模式（ＭＭ４），以常规观测资料为初始场，成功地模拟了造成“９４．４．５”沙尘暴天气的主要天气系统张掖热低压。并通过给原有的中尺度模式系统加入沙尘输送方程和驱动地面沙尘抬升参数化方案，用改进后的中尺度数值模式系统，成功地模拟了沙尘抬升和输送，与实况比较一致。     

大气气溶胶光学厚度的宽带消光遥感方法及其应用

该文发展了遥感气溶胶光学厚度的一个宽带消光遥感方法 ,它应用地面上太阳直射表探测的宽波段太阳直射信息反演 0 75 μm大气柱光学厚度。这方法的主要误差因子是气溶胶谱的不确定性。数值试验表明 ,气溶胶谱分布的误差所引起光学厚度解的误差一般小于 5 %。 1995年 1— 10月进行的 12 6 7组对比实验表明 ,由本方法探测的气溶胶光学厚度与光度计探测的气溶胶光学厚度的标准差为 10 5 % ,两者平均结果的偏差只有 0 7%。该文还应用这个方法 ,从气象台站辐射观测资料反演得到北京、沈阳等 10个地方 1980— 1994年间晴天气溶胶光学厚度资料 ,并分析其变化规律