Aeolian abrasion and modes of fine particle production from natural red dune sands: an experimental study

A series of experiments was conducted to determine the potential for aeolian abrasion of natural dune sands to produce fine particles (< 125 µm) by (1) the release of resident fines; (2) spalling, chipping and breakage of particles; and (3) the removal of grain surface coatings. Parent samples were obtained from the surfaces of four active continental dunes and abraded using a glass ‘test tube’ chamber for up to 120 h. The fine particles produced by this abrasion process were trapped at varying time intervals and subject to detailed particle‐size analyses using a Coulter Multisizer. The abrasion of untreated parent samples produced fine particles in one of two main size classes, < 10 µm and > 50 µm, but when the parent sample was sieved to exclude particles < 250 µm, relatively more material in the range 10–50 µm was produced. For unsieved parent samples, the size range associated with the dominant mode varied according to the length of the abrasion time. The coarsest mode (> 63 µm) was dominant during the first 16 h of abrasion, then became less significant and is thought to be associated with the release of resident fines into suspension. The finest mode (< 10 µm) was absent or very weak during the first 16 h of abrasion, then became more significant and, in some instances, dominated the distribution as abrasion continued. Removal of grain surface coatings is the main source of fine material < 10 µm, and this may be a significant source of fine material in areas where sands are dominated by subrounded and rounded particles. By comparison with previous studies of aeolian particle abrasion, these natural dune sands produced very low quantities of fine material (by weight), but their spatial extent makes them potentially a significant source of dust‐sized particles at the global scale.     

泰国水稻种植面积月变化的遥感监测

介绍了光学和微波遥感影像相结合进行泰国水稻种植面积监测方法。泰国雨季雨量充足 ,气温适合 ,同一时间耕地上水稻的物候多样 ,每月水稻种植面积都发生变化。利用旱季的TM影像 ,获得耕地信息。同时利用TM影像覆盖的雷达区域进行非耕地去除 ,进行非监督分类 ,提取反映水稻种植不同生长期的雷达影像后向反射系数特征 ,建立各种类型的分类模型 ,采用监督分类的方法对全景雷达数据进行水稻种植情况调查 ,并分别予以识别和统计 ,反映研究区水稻月种植情况。分类结果通过类别检验和面积量算检验进行精度评价和分析。     

Dust production and the release of iron oxides resulting from the aeolian abrasion of natural dune sands

Global dust trajectories indicate that signi?cant quantities of aeolian‐transported iron oxides originate in contemporary dryland areas. One potential source is the iron‐rich clay coatings that characterize many sand‐sized particles in desert dune?elds. This paper uses laboratory experiments to determine the rate at which these coatings can be removed from dune sands by aeolian abrasion. The coatings impart a red colour to the grains to which previous researchers have assigned variable geomorphological signi?cance. The quantities of iron removed during a 120 hour abrasion experiment are small (99 mg kg^?1) and dif?cult to detect by eye; however, high resolution spectroscopy clearly indicates that ferric oxides are released during abrasion and the re?ectance of the particles alters. One of the products of aeolian abrasion is ?ne particles (<10 µm diameter) with the potential for long distance transport. Copyright © 2004 John Wiley & Sons, Ltd.     

Efficient use of resources: urban waste ash and soil fertility on the Jos Plateau, Nigeria

Waste disposal constitutes an acute problem in numerous African cities. One solution could lie in the recycling of the nutrient-rich waste into agriculture taking place in and around cities. Farmers involved in vegetable production around Jos, Nigeria, have developed a sophisticated soil fertility management strategy combining inorganic fertilizers, manure and urban waste ash. This paper: (1) investigates the socio-economic constraints linked to obtaining scarce organic inputs, particularly urban waste ash and the health hazards (particularly heavy metal contamination of soil and crops) caused by using this ash and (2) suggests ways to improve use of this important resource.     

Determining risk sources and strategies among farmers of contrasting risk awareness: A case study for Cukurova region of Turkey

In this paper, the results of a survey conducted in the Cukurova region of Turkey are presented. The aim of this research is to identify groups of farmers who differ in their risk sources and risk management strategies. The respondents to the survey were divided into three risk attitude groups, risk averse, risk seeking and risk neutral. Factor analysis has been conducted on information obtained from 112 farmers in 2000. From the findings of the research, risk sources were labelled as environmental, price, catastrophe, input costs, production and technological, political, finance, personal, marketing, health and social security. The dimensions of risk strategies were named as diversification, off-farm income, marketing, planning, financing and security.     

基于NDVI时间序列数据的江西省水稻种植制度变化研究

利用Savitzky-Golay滤波对覆盖江西省范围的SPOT VGT NDVI时间序列数据进行平滑处理的基础上,结合坡度数据,通过非监督分类的方法提取了江西省2000、2005和2010年水稻种植范围,并根据NDVI的年内动态变化,从水稻种植范围、水稻生长季起始时间、水稻复种指数和NDVI最大振幅等分析了江西省水稻种植和生长情况,探讨2000~2010年江西省水稻生产的变化。     

地理国情普查时点核准作业方法探讨

通过核实从数据采集到标准时点阶段发生变化的内容,补充新增内容,消除普查前阶段由于资料时效性和外业局限性等导致的现势性不统一现象,对变化的地理国情信息进行核准,使地理国情普查数据成果在时间上达到统一,是开展地理国情监测的基础。     

基于AutoCAD的天津测绘生产系统设计与实现

城市测量的种类多且内业成果复杂,天津对各项内业成果都有特定的要求,急需一个统一的生产平台。通过对勘测定界、地籍等9类项目进行分析,规范了生产制作流程,制定了描述多种数据格式的标准,设计了系统结构,在AutoCAD基础上开发实现了天津测绘生产自动化系统。系统以项目工程为单元对成果数据进行管理,实现了标准化生产。     

基于作物模型的河南省旱稻干旱风险评估

采用作物模型与数理统计相结合的方法,利用长期历史气象资料,以作物模型和地理信息系统技术为工具,系统分析了河南地区旱稻生育期水分盈亏情况。以模型模拟的雨养条件下实际蒸散量相对于潜在条件下的蒸散量(即需水量)的亏缺率,即水分亏缺指数,以雨养条件下产量相对于潜在产量的损失率(即灾损指数)作为产量灾损强度评价指标,从受旱程度和产量损失两个角度构建干旱风险评估模型,进行干旱风险评估。结果表明:河南省旱稻生育期集中在6—9月,水分亏缺最多的阶段为出苗—穗分化阶段,水分亏缺指数变化在0.50~0.60,其次是开花—成熟阶段和穗分化—开花阶段,水分亏缺指数变化在0.11~0.43;全生育期水分亏缺指数在0.36~0.50。出苗—穗分化阶段干旱发生的风险最大,其次是开花—成熟阶段,穗分化—开花阶段的最小。河南旱稻生育期干旱风险呈现为由东南向西北逐渐升高的分布,其中三门峡、济源西部一带风险最高,洛阳南部和南阳西北部一带最低,黄河以北大部地区和豫东、豫南地区风险居中。     

Development and Utilization of the World’s and China’s Bulk Mineral Resources and their Supply and Demand Situation in the Next Twenty Years

Bulk mineral resources of iron ores, copper ores, bauxite, lead ores, zinc ores and potassium salt play a pivotal role on the world’s and China’s economic development. This study analyzed and predicted their resources base and potential, development and utilization and their world’s and China’s supply and demand situation in the future 20 years. The supply and demand of these six bulk mineral products are generally balanced, with a slight surplus, which will guarantee the stability of the international mineral commodity market supply. The six mineral resources(especially iron ores and copper ores) are abundant and have a great potential, and their development and utilization scale will gradually increase. Till the end of 2014, the reserveproduction ratio of iron, copper, bauxite, lead, zinc ores and potassium salt was 95 years, 42 years, 100 years, 17 years, 37 years and 170 years, respectively. Except lead ores, the other five types all have reserve-production ratio exceeding 20 years, indicative of a high resources guarantee degree. If the utilization of recycled metals is counted in, the supply of the world’s six mineral products will exceed the demand in the future twenty years. In 2015–2035, the supply of iron ores, refined copper, primary aluminum, refined lead, zinc and potassium salt will exceed their demand by 0.4–0.7 billion tons(Gt), 5.0–6.0 million tons(Mt), 1.1–8.9 Mt, 1.0–2.0 Mt, 1.2–2.0 Mt and 4.8–5.6 Mt, respectively. It is predicted that there is no problem with the supply side of bulk mineral products such as iron ores, but local or structural shortage may occur because of geopolitics, monopoly control, resources nationalism and trade friction. Affected by China’s compressed industrialized development model, the demand of iron ores(crude steel), potassium salt, refined lead, refined copper, bauxite(primary aluminum) and zinc will gradually reach their peak in advance. The demand peak of iron ores(crude steel) will reach around 2015, 2016 for potassium salt, 2020 for refined lead, 2021 for bauxite(primary aluminum), 2022 for refined copper and 2023 for zinc. China’s demand for iron ores(crude steel), bauxite(primary aluminum) and zinc in the future 20 years will decline among the world’s demand, while that for refined copper, refined lead and potassium salt will slightly increase. The demand for bulk mineral products still remains high. In 2015–2035, China’s accumulative demand for iron ores(crude steel) will be 20.313 Gt(13.429 Gt), 0.304 Gt for refined copper, 2.466 Gt(0.616 Gt) of bauxite(primary aluminum), 0.102 Gt of refined lead, 0.138 Gt of zinc and 0.157 Gt of potassium salt, and they account for the world’s YOY(YOY) accumulative demand of 35.17%, 51.09%, 48.47%, 46.62%, 43.95% and 21.84%, respectively. This proportion is 49.40%, 102.52%, 87.44%, 105.65%, 93.62% and 106.49% of that in 2014, respectively. From the supply side of China’s bulk mineral resources, it is forecasted that the accumulative supply of primary(mine) mineral products in 2015–2035 is 4.046 Gt of iron ores, 0.591 Gt of copper,1.129 Gt of bauxite, 63.661 Mt of(mine) lead, 0.109 Gt of(mine) zinc and 0.128 Gt of potassium salt, which accounts for 8.82%, 13.92%, 26.67%, 47.09%, 33.04% and 15.56% of the world’s predicted YOY production, respectively. With the rapid increase in the smelting capacity of iron and steel and alumina, the rate of capacity utilization for crude steel, refined copper, alumina, primary aluminum and refined lead in 2014 was 72.13%, 83.63%, 74.45%, 70.76% and 72.22%, respectively. During 2000–2014, the rate of capacity utilization for China’s crude steel and refined copper showed a generally fluctuating decrease, which leads to an insufficient supply of primary mineral products. It is forecasted that the supply insufficiency of iron ores in 2015–2035 is 17.44 Gt, 0.245 Gt of copper in copper concentrates, 1.337 Gt of bauxite, 38.44 Mt of lead in lead concentrates and 29.19 Mt of zinc in zinc concentrates. China has gradually raised the utilization of recycled metals, which has mitigated the insufficient supply of primary metal products to some extent. It is forecasted that in 2015–2035 the accumulative utilization amount of steel scrap(iron ores) is 3.27 Gt(5.08 Gt), 70.312 Mt of recycled copper, 0.2 Gt of recycled aluminum, 48 Mt of recycled lead and 7.7 Mt of recycled zinc. The analysis on the supply and demand situation of China’s bulk mineral resources in 2015–2035 suggests that the supply-demand contradiction for these six types of mineral products will decrease, indicative of a generally declining external dependency. If the use of recycled metal amount is counted in, the external dependency of China’s iron, copper, bauxite, lead, zinc and potassium salt will be 79%, 65%, 26%, 8%, 16% and 18% in 2014, respectively. It is predicted that this external dependency will decrease to 62%, 64%, 20%,-0.93%, 16% and 14% in 2020, respectively, showing an overall decreasing trend. We propose the following suggestions correspondingly.(1) The demand peak of China’s crude steel and potassium salt will reach during 2015–2023 in succession. Mining transformation should be planned and deployed in advance to deal with the arrival of this demand peak.(2) The supply-demand contradiction of China’s bulk mineral resources will mitigate in the future 20 years, and the external dependency will decrease accordingly. It is suggested to adjust the mineral resources management policies according to different minerals and regions, and regulate the exploration and development activities.(3) China should further establish and improve the forced mechanism of resolving the smelting overcapacity of steel, refined copper, primary aluminum, lead and zinc to really achieve the goal of "reducing excess production capacity".(4) In accordance with the national strategic deployment of "One Belt One Road", China should encourage the excess capacity of steel, copper, alumina and primary aluminum enterprises to transfer to those countries or areas with abundant resources, high energy matching degree and relatively excellent infrastructure. Based on the national conditions, mining condition and geopolitics of the resources countries, we will gradually build steel, copper, aluminum and lead-zinc smelting bases, and potash processing and production bases, which will promote the excess capacity to transfer to the overseas orderly.(5) It is proposed to strengthen the planning and management of renewable resources recycling and to construct industrial base of renewable metal recycling.(6) China should promote the comprehensive development and utilization of paragenetic and associated mineral species to further improve the comprehensive utilization of bulk mineral resources.