木本植被覆盖岸坡上波浪爬升过程的数值模拟研究

近岸木本植物构成的生态缓冲带作为新型的海岸软防护结构,兼具功能性和生态友好性,在沿海工程建设中愈发受到关注,如何深入开展其防护效果的机理研究是目前亟待解决的问题。本文采用数值模拟方法,在N-S方程中分别考虑树枝和树干的拖曳力影响,提出了木本植被作用下波浪沿斜坡爬升的表面波衰减的连续介质等效模型,并采用MAC法来跟踪自由曲面上的水颗粒轨迹。本文以波浪沿1/30的斜坡爬升为算例,对比讨论了有无植被作用下波浪的传播过程,并将算例结果与以往试验结果规律进行对照,验证了数值模型的有效性。最后,分别讨论了植物枝干的高度、密度、树枝倾斜角度等植被特性和波浪因素对植被消浪效果的影响,得到植被消浪的基本规律。文中的计算结果也可为实际的护岸工程和生态景观设计提供参考。     

长江口附近海域台风浪的数值模拟--以鹿沙台风和森拉克台风为例

利用SWAN波浪模型计算长江口附近海域的台风浪,鉴于长江河口岸界和地形复杂,拟采用曲线网格.为证实曲线网格下的SWAN模型对于复杂地形的有效性,首先选用美国特拉华大学波浪水池实验资料对SWAN模型进行检验,结果表明利用曲线网格能不过多增加计算量而提高关键区域的计算精度.以0215号鹿沙台风和0216号森拉克台风为例,将SWAN模型应用到长江口附近海域,进行台风浪的数值模拟.通过浮标测站实测资料验证,表明有效波高计算值与实测值符合良好.通过综合分析模型计算的波浪场,说明SWAN模型能合理地反映长江口附近海域台风浪的分布.     

西藏直孔水电站大坝混凝土防渗墙超前支护成槽试验研究及施工

在西藏直孔水电站松散砂卵石地层混凝土防渗墙成槽施工中，结合坝基水文地质及工程地质特点，创造性地提出了超前支护成槽方案，通过三维应力模拟和渗透试验，结合现场生产试验，对原方案更进一步完善，在施工中加以应用获得了成功。     

Developing constitutive models from EPR‐based self‐learning finite element analysis

A constitutive model that captures the material behavior under a wide range of loading conditions is essential for simulating complex boundary value problems. In recent years, some attempts have been made to develop constitutive models for finite element analysis using self‐learning simulation (SelfSim). Self‐learning simulation is an inverse analysis technique that extracts material behavior from some boundary measurements (eg, load and displacement). In the heart of the self‐learning framework is a neural network which is used to train and develop a constitutive model that represents the material behavior. It is generally known that neural networks suffer from a number of drawbacks. This paper utilizes evolutionary polynomial regression (EPR) in the framework of SelfSim within an automation process which is coded in Matlab environment. EPR is a hybrid data mining technique that uses a combination of a genetic algorithm and the least square method to search for mathematical equations to represent the behavior of a system. Two strategies of material modeling have been considered in the SelfSim‐based finite element analysis. These include a total stress‐strain strategy applied to analysis of a truss structure using synthetic measurement data and an incremental stress‐strain strategy applied to simulation of triaxial tests using experimental data. The results show that effective and accurate constitutive models can be developed from the proposed EPR‐based self‐learning finite element method. The EPR‐based self‐learning FEM can provide accurate predictions to engineering problems. The main advantages of using EPR over neural network are highlighted.     

Accurate real‐time hybrid earthquake simulations on large‐scale MDOF steel structure with nonlinear viscous dampers

This paper presents real‐time hybrid earthquake simulation (RTHS) on a large‐scale steel structure with nonlinear viscous dampers. The test structure includes a three‐story, single‐bay moment‐resisting frame (MRF), a three‐story, single‐bay frame with a nonlinear viscous damper and associated bracing in each story (called damped braced frame (DBF)), and gravity load system with associated seismic mass and gravity loads. To achieve the accurate RTHS results presented in this paper, several factors were considered comprehensively: (1) different arrangements of substructures for the RTHS; (2) dynamic characteristics of the test setup; (3) accurate integration of the equations of motion; (4) continuous movement of the servo‐controlled hydraulic actuators; (5) appropriate feedback signals to control the RTHS; and (6) adaptive compensation for potential control errors. Unlike most previous RTHS studies, where the actuator stroke was used as the feedback to control the RTHS, the present study uses the measured displacements of the experimental substructure as the feedback for the RTHS, to enable accurate displacements to be imposed on the experimental substructure. This improvement in approach was needed because of compliance and other dynamic characteristics of the test setup, which will be present in most large‐scale RTHS. RTHS with ground motions at the design basis earthquake and maximum considered earthquake levels were successfully performed, resulting in significant nonlinear response of the test structure, which makes accurate RTHS more challenging. Two phases of RTHS were conducted: in the first phase, the DBF is the experimental substructure, and in the second phase, the DBF together with the MRF is the experimental substructure. The results from the two phases of RTHS are presented and compared with numerical simulation results. An evaluation of the results shows that the RTHS approach used in this study provides a realistic and accurate simulation of the seismic response of a large‐scale structure with rate‐dependent energy dissipating devices. Copyright © 2015 John Wiley & Sons, Ltd.     

利用混合法构建三维数字岩心(英文)

在弹性波有三维数字岩心描述了岩石的微观孔隙结构。X射线CT扫描是获取三维数字岩心最准确和直接的方法,但实验成本高。本文结合沉积过程模拟和模拟退火算法,提出了重建三维数字岩心的混合法,基于岩石二维图像重建三维数字岩心。利用岩石颗粒沉积算法构建初始数字岩心,作为模拟退火算法的初始状态。运用模拟退火算法调整岩石颗粒和孔隙的相对位置,使三维数字岩心与岩心二维图像具有相似的自相关函数,从而建立三维数字岩心。与传统模拟退火算法相比,该方法计算时间明显减小。运用局部孔隙度理论定量比较了重建数字岩心和岩心X射线微CT图像,两种数字岩心具有相似的均质性和孔隙连通性。利用有限元方法和格子玻尔兹曼方法分别模拟了重建三维数字岩心的地层因素和渗透率,数值模拟结果与实验结果相符。相比传统模拟退火算法,混合法重建数字岩心的传导特性更接近真实岩心的传导特性。     

塔河油田碎屑岩油气运聚模拟及潜力区优选

为了系统研究塔河油田碎屑岩油气运聚过程,针对研究区目的层的地质特征,文章采用流径和逾渗综合方法进行油气运聚模拟分析。该方法基于断裂-砂体输导格架来开展油气运聚模拟,首先通过断层的分级、分期研究,结合实际资料形成了断层开启性判别标准,进而建立断层输导格架模型;综合使用压实曲线和孔渗关系,利用相控建模技术建立砂体输导格架模型。在断裂-砂体输导格架基础上开展了油气运聚模拟,模拟结果与现有的油气藏吻合较好,表明流径与逾渗综合法是一种模拟研究区目的层油气运聚过程的有效方法。同时,利用模拟结果,明确了主要目的层的潜力区域,对研究区碎屑岩的勘探部署有重要意义和实际价值。      

被动陆缘盆地陆隆斜坡对盐构造形成的影响 ——来自物理模拟实验的启示

被动陆缘盆地盐构造形成的影响因素及时空演化分析受到了国内外学者的高度重视.丰富的油气资源促进了被动陆缘盆地地震资料品质的不断提升,高精度地震数据的解译结果表明,被动陆缘盆地盐层下的地形往往具有大型的起伏特征,而前人在基底构造形态对盐构造形成影响方面的研究并未取得共识,仍需要深入研究和探讨.为此,本文基于前人的研究认识,...     

鄂尔多斯西南缘前陆盆地沉降和沉积过程模拟

本文将东祁东逆冲带与鄂尔多斯西南缘晚三叠世前陆盆地相结合，研究了逆冲带内部变形特征，前陆盆地中层序地层格架特征及其反映的盆缘构造性质和幕式逆作作用。     

利用ARC/INFO进行三维地形模型的建立、处理和动态模拟

介绍了利用 ARC/ INFO建立三维地形模型的方法 ,以及利用其新版本的部分新功能处理三维地形模型、进行动态模拟的方法 ,与以往处理三维模型必须借助外部三维图形开发软件包的方法相比 ,具有高速、灵活、可视性强、支持强大分析功能等优点。形成的三维模型可随时与 ARC/ INFO的其它数据模型交换信息 ,与外部进程实时通讯 ,为使用者提供了二维分析工具所不能提供的信息 ,为开发视景仿真系统等与表面分析、立体显示有关的应用系统提供了强有力的支持。