双通道能见度自动测量仪研究

从透射和散射的原理出发,推导了基于红外测量的双通道能见度仪的工程测量方程,比较了单通道和双通道能见度测量仪的性能,结果表明,双通道能见度测量仪具有精度高、性能稳定、使用可靠、维护量小的特点。     

地图概括中空间目标几何信息传递模型研究

地图概括是实现多比例尺地图生产和更新的一种重要理论方法。目前,国际国内制图学界对地图概括的研究主要集中在发展地图概括算法方面,在地图概括的质量评价方面的研究还很少。为此,本文以信息论为理论基础,以地图概括中空间目标几何信息的传递问题为研究对象,以相应空间目标几何信息的传递效率来度量地图概括中单个空间目标的概括质量。首先,建立了地图概括的空间信息传递模型,描述不同比例尺地图之间空间信息的传递过程。进而提出了地图概括过程中空间目标(即:线和面目标)几何信息的传递模型,并且对地图概括中空间目标几何信息的传递状况进行了评估,给出了具体的计算和实现方法。最后,通过实验初步验证了地图概括中空间目标几何信息传递模型的可行性。     

倾斜实景模型和LiDAR点云数据相融合的不动产测量新方法

不动产地籍测量是一项基础性的测绘工作,地籍测量技术与方法的良性发展不仅能够最大限度地提升我国土地利用率,还能为获取高精度的空间数据提供高效便捷的手段.针对传统全站仪与GPS RTK组合地籍测量作业效率低、人力财力耗费大的缺点,本文依托陕南某地的地籍和不动产权籍调查项目,提出了一种地面三维激光扫描技术和倾斜摄影测量技术相...     

测氡在滑坡研究中的应用

测氡是一种放射性地球物理方法,利用滑坡体与其周边岩土体的结构差异,应用测氡可对滑坡进行勘探,对滑坡的结构特征进行研究,达到节约投资,缩短勘探时间的目的,并可与地质分析相互验证,为工程应用提供依据。     

Measurement of stream cross section using ground penetration radar with Hilbert–Huang transform

This study presents a new method to measure stream cross section without having contact with water. Compared with conventional measurement methods which apply instruments such as sounding weight, ground penetration radar (GPR), used in this study, is a non‐contact measurement method. This non‐contact measurement method can reduce the risk to hydrologists when they are conducting measurements, particularly in high flow period. However, the original signals obtained by using GPR are very complex, different from studies in the past where the measured data were mostly interpreted by experts with special skill or knowledge of GPR so that the results obtained were less objective. This study employs Hilbert–Huang transform (HHT) to process GPR signals which are difficult to interpret by hydrologists. HHT is a newly developed signal processing method that can not only process the nonlinear and non‐stationary complex signals, but also maintain the physical significance of the signal itself. Using GPR with HHT, this study establishes a non‐contact stream cross‐section measurement method with the ability to measure stream cross‐sectional areas precisely and quickly. Also, in comparison with the conventional method, no significant difference in results is found to exist between the two methods, but the new method can considerably reduce risk, measurement time, and manpower. It is proven that the non‐contact method combining GPR with HHT is applicable to quickly and accurately measure stream cross section. Copyright © 2013 John Wiley & Sons, Ltd.     

Laboratory Simulation of the Formation Process of Surface Geochemical Anomalies Applied to Hydrocarbon Exploration

The formation mechanisms and processes of geochemical anomalies used as proxies in surface geochemistry exploration (SGE) have not been well understood. Previous studies cannot realize 3D measurement of microseeping hydrocarbons from reservoirs to the surface, which made it difficult to understand the features and pathways of deep hydrocarbon microseepages. Understanding the processes of hydrocarbon microseepages will contribute to the acceptance and effectiveness of surface geochemistry. Based on a simplified geological model of hydrocarbon microseepages, including hydrocarbon reservoir, direct caprock, overlying strata and Quaternary sediments, this work established a 3D experimental system to simulate the mechanisms and processes of deep hydrocarbon microseepes extending to the surface. The dispersive halos of microseeping hydrocarbons in the subsurface were adequately described by using this 3D experimental system. Results indicate that different migration patterns of hydrocarbons above the point gas source within the simulated caprock and overlying strata can be reflected by the ratio of i-butane to n-butane (i-C4/n-C4), which follow diffusion and infiltration (buoyancy) mechanisms. This is not the case for vertical measurement lines far from the point gas source. A vertical gas flow in the form of a plume was found during hydrocarbon microseepage. For sampling methods, the high-density grid sampling is favorable for delineating prospecting targets. Hydrocarbon infiltration or buoyancy flow occurs in the zones of infiltration clusters, coupling with a diffusion mechanism at the top of the water table and forming surface geochemical anomalies. These results are significant in understanding hydrocarbon microseepage and interpreting SGE data.     

浮托安装进船过程中护舷碰撞力实测研究

浮托安装法广泛应用于大型组块海上安装。导管架平台上部组块浮托安装进船过程中,风、浪、流引起的浮托驳船横向运动造成浮托驳船与导管架桩腿的碰撞,碰撞力可能会对导管架结构造成损伤。陆丰7-2上部组块浮托安装中,为了监测碰撞力大小,设计了碰撞力海上监测系统。通过在导管架外侧四个桩腿上安装光纤光栅应变传感器对碰撞过程中导管架桩腿进行应力监测,进而计算碰撞力。对碰撞过程,载荷作用位置、方向进行简化,并对载荷大小及垂向作用位置对计算的影响进行了研究。结构分析模型简化后,测点von-Mises应力与碰撞力大小成正比,对导管架整体结构建模计算并取局部结构计算比例系数,结合应力实测数据计算出进船过程中驳船对导管架桩腿碰撞力。     

Evaluation of Effective Depth of PVD Improvement in Soft Clay Deposit: A Field Case Study

This article presents a case history of determination of effective depth of prefabricated vertical drains (PVDs) under embankment loading on a very soft clay deposit in central China, near Jiujiang, Jiangxi Province. The height of the embankment was 5.3 m and construction time was about one year. The PVDs were installed to a depth of 8.5 m at a spacing of 1.5 m in a triangular pattern. Field observations and the finite element method (FEM) were employed to analyze the performance of the soft deposit during embankment construction. The influential depth of the embankment loading was evaluated based on settlement, excess pore pressure, and stress increase in subsoil, both from the observed data and FEM analysis. The effective PVD depth was determined in the following ways: (1) the depth of 5% subsoil settlement of surface settlement; (2) vertical stress increase in subsoil of 25% in-situ stress; and (3) consolidation time/PVD depth relation by FEM. Based on the analysis, the effective depth of PVDs was determined to be between 10 and 12.8 m for this field case.     

Advances and Trends in Atmospheric Measurement by Smartphones*

With the development and popularization of smartphones and embedded sensors, a non-professional atmospheric measurement method by using smartphones carried by the public has been proposed recently. Without extra dedicated instrument, this method has many advantages, such as low hardware cost, high spatio-temporal resolution, and wide coverage, and it can supplement the professional atmospheric measurement methods, which has broad applications in the meteorological operation, scientific research, public service, and other fields. At present, the research on the non-professional atmospheric measurement in China is limited. In order to make full use of this method, this paper briefly outlined the states of existing smartphones and embedded sensors, highlighted the measurement of precipitation, air temperature, pressure, aerosols, and radiation by smartphones. To promote the development of smartphones for atmospheric measurement, future research should focus on mechanism study, available sources exploration, data quality control, big data processing, joining and matching with operation, research and service, etc.     

综合物探法在砂岩型铀矿中深部找矿中的实践与分析——以新疆昭苏盆地为例

为了探查新疆昭苏盆地砂岩型铀矿的异常信息,选择可控源音频大地电磁测量、高精度磁测和土壤氡气测量三种物探方法,并简要介绍各方法的工作原理。通过分析昭苏盆地的地质特征、物性特征和本区的找矿难点,对昭苏盆地综合物探数据所蕴含的信息进行地质-物探综合解译。实践证明:可控源音频大地电磁测量对低阻和高阻体均有良好的电性响应,可以划分地层、推断断裂构造;高精度磁测可以推断氧化还原界面,辅助解释断裂构造;土壤氡气测量可辅助解释断裂构造,对地下铀矿体有指示作用,三种方法的技术特性相互补充,提高了物探解释的准确性。突破了伊犁盆地以往600 m的找矿深度,并以电性稳定的中阻厚层、磁测异常、氡异常偏高晕和峰-谷状曲线作为预测标志,解决了深埋藏条件下赋矿地质体的圈定难点,在昭苏盆地砂岩型铀矿中、深部找矿工作中取得了良好的效果。