豫西洛宁县铁炉坪Ag多金属矿床的CSAMT剖面及找矿意义

为获得新的深部找矿靶区,在铁炉坪Ag多金属矿床实施了CSAMT法测深。CSAMT剖面中,高、中、低电阻率异常体边界清晰、形态各异,高阻异常体具有上、下双层结构,低阻异常体出露较小,多呈孤立形态产出,主要有400m低阻异常体和1400m低阻异常体。高阻异常体被解释为浅部和深部两层岩浆和深部流体活动的产物,推测深部高阻异常体以岩浆体系为主,浅部高阻异常体应是岩浆体系、深部流体体系及围岩硅化蚀变等的综合反映。400m低阻异常体对应于于地表剖面线400m~600m之间的主矿脉,表明它是深部成矿流体的显示,提出1400m低阻异常体为新的深部找矿靶区。     

强台风海鸥登陆期间近地层风特性分析

利用位于海南文昌市的90 m测风塔观测的强台风海鸥多层测风数据,分析了台风海鸥登陆期间近地层风场时空特征、湍流强度、垂直风切变及阵风因子等风场特性,分析结果表明:台风海鸥登陆期间,近地层各高度风速呈现"M"型双峰特征,最大风速出现在台风后风圈;台风过境前后,风向旋转了180°;近地层风速随高度升高而增大,各高度风速垂直切变符合对数和指数规律;粗糙度长度、风廓线幂指数、湍流强度、阵风系数等风场特性与风速呈负相关关系,随着风速的增加而降低;从台风外围至台风眼,粗糙度长度随风速呈现"增大-减小-增大"特征;台风眼内部风速垂直切变剧烈,前后风圈的风速垂直切变较弱;强风区湍流强度较弱,弱风区湍流强度较强;台风风圈的湍流强度随高度增加而减小,台风眼内湍流强度随高度先减小再增加;台风影响各阶段阵风系数随高度升高而减小,各高度层阵风系数遵循指数定律;阵风系数随风速的增大而减小,当风速达到一定强度时,阵风系数随风速变化不明显。     

中国东部夏季暴雨的年代际跃变及其大尺度环流背景

本文利用1960~2011年中国东部地面测站的逐日降水资料和JRA-55再分析资料探讨了夏季暴雨分布的年代际跃变及其相关联的大尺度环流异常特征。基于暴雨频数和占比(夏季暴雨占比是指5~8月暴雨降水量对总降水量的贡献百分比)的分析结果表明:中国东部夏季暴雨分布在20世纪70年代末和90年代初经历两次反相的经向"三极子"跃变。中国东部夏季暴雨的年代际演变过程可分为三个时段:1960~1979年为华南和华北暴雨偏多、江淮流域暴雨偏少的经向"三极子"分布;1980~1991年为南方和华北暴雨偏少、江淮流域暴雨偏多的经向三极子"分布;1992~2011年为南方暴雨显著偏多、华北暴雨持续偏少,逐渐形成经向"偶极子"分布,并导致近十多年我国夏季"南涝北旱"的整体格局。1970年代末(1990年代初)跃变相关联的大尺度环流异常配置:东亚夏季风的减弱(增强),西太平洋副高的增强西伸但南撤(北抬),南亚高压的减弱南缩(增强东扩),以及蒙古高原中低层的气旋式(反气旋式)环流异常。与此同时,低层局地环流也发生调整:华北和黄淮地区以及华南和江南地区均为反气旋式(气旋式)环流异常,而江淮流域和四川盆地受控于风场切变式辐合(辐散)异常;涡度场发生相应变化,南北方大部分地区的负(正)涡度异常不(有)利于低涡的发展,而江淮流域和四川盆地的正(负)涡度异常有(不)利于低涡的发展,进而引发江南和华南暴雨减少(增加)、江淮流域和四川盆地暴雨增加(减少)、黄淮和华北暴雨减少(增加)的经向"三极子"跃变。     

Retrieval of effective leaf area index (LAIe) and leaf area density (LAD) profile at individual tree level using high density multi-return airborne LiDAR

As an important canopy structure indicator, leaf area index (LAI) proved to be of considerable implications for forest ecosystem and ecological studies, and efficient techniques for accurate LAI acquisitions have long been highlighted. Airborne light detection and ranging (LiDAR), often termed as airborne laser scanning (ALS), once was extensively investigated for this task but showed limited performance due to its low sampling density. Now, ALS systems exhibit more competing capacities such as high density and multi-return sampling, and hence, people began to ask the questions like—“can ALS now work better on the task of LAI prediction?” As a re-examination, this study investigated the feasibility of LAI retrievals at the individual tree level based on high density and multi-return ALS, by directly considering the vertical distributions of laser points lying within each tree crown instead of by proposing feature variables such as quantiles involving laser point distribution modes at the plot level. The examination was operated in the case of four tree species (i.e. Picea abies, Pinus sylvestris, Populus tremula and Quercus robur) in a mixed forest, with their LAI-related reference data collected by using static terrestrial laser scanning (TLS). In light of the differences between ALS- and TLS-based LAI characterizations, the methods of voxelization of 3D scattered laser points, effective LAI (LAIe) that does not distinguish branches from canopies and unified cumulative LAI (ucLAI) that is often used to characterize the vertical profiles of crown leaf area densities (LADs) was used; then, the relationships between the ALS- and TLS-derived LAIes were determined, and so did ucLAIs. Tests indicated that the tree-level LAIes for the four tree species can be estimated based on the used airborne LiDAR (R² = 0.07, 0.26, 0.43 and 0.21, respectively) and their ucLAIs can also be derived. Overall, this study has validated the usage of the contemporary high density multi-return airborne LiDARs for LAIe and LAD profile retrievals at the individual tree level, and the contribution are of high potential for advancing forest ecosystem modeling and ecological understanding.     

利用引力梯度数据计算径向梯度的优化方法

根据重力梯度观测各分量的方差及协方差信息,提出了利用GOCE梯度数据计算径向重力梯度的优化方法。首先给出了径向重力梯度的计算方法,并深入分析了误差传播规律,通过建立相应的条件极值问题,给出了计算径向重力梯度最优组合因子的方法;通过模拟数据验证了本文所提出的优化因子的优越性。实际数据计算表明:相对于传统方法,采用优化组合因子可使反演所得引力位模型的累积大地水准面精度在250阶时提高约2 cm。由于径向重力梯度不仅可以用于地球引力场模型的求解,也可直接应用于地球物理问题的讨论,因此本文所提出的优化方法也可对部分地球动力学问题的讨论提供方便。     

多波束测量的精度控制与规范指标

分析多波束测量、辅助测量的数据精度,研究其对成果水深的影响程度,结合《海道测量规范》与《多波束水深测量技术规定》中的测量等级指标,以及IHO规范中对水深不确定度的定义和传播结构的介绍,建立数学模型反解出符合规范的作业环境与辅助测量数据的等级指标,提出明确的多波束测量作业精度控制的技术指标,为测量数据的质量监控建立更全面的评价标准。     

云蒙湖流域不同坡度的土壤侵蚀特征

针对定量分析土壤侵蚀在各坡度等级上的空间分布研究较少的现状,该文选用通用的土壤流失预报方程,对云蒙湖流域1986—2010年间的土壤水力侵蚀状况进行了定量的估算,以探讨不同坡度上的土壤侵蚀特征,并进一步分析了土壤侵蚀变化与人类活动的关系。分析得出:土壤侵蚀强度发生在人类活动比较频繁的区域上(8~25°坡度)更为严重;2010年比1986年强度以上所占比例在15°坡度等级上相对更低,在15°坡度等级上有所增加;云蒙湖流域主要土壤侵蚀量发生在25°坡度上;2010年比1986年耕地面积减少、林地和居民用地面积增加是土壤侵蚀降低的主要因素。     

天山南麓库车晚新生代褶皱-冲断带

库车褶皱冲断带位于天山南麓,由近东西走向的多条构造带组成。三叠系暗色泥岩、侏罗系煤层、古近系库姆格列木组膏盐层和新近系吉迪克组膏盐层构成库车褶皱冲断带的区域性主滑脱面。褶皱冲断带底面由北向南逐渐抬高。褶皱冲断带主体发育盖层滑脱-冲断构造(薄皮构造),基底卷入型冲断构造(厚皮构造)见于北缘的根带。新生界膏盐层之上构造变形以滑脱褶皱为特色,之下以冲断构造为特色。库车褶皱冲断带是印度-亚洲碰撞远程效应下,(南)天山晚新生代造山过程的产物。褶皱冲断带构造变形的动力来源主要是造山楔向塔里木盆地推进所形成的挤压构造应力。褶皱冲断带构造变形的起始时间为约23Ma,构造变形具有阶段式加速的特点,已经识别出约23Ma、约10Ma、5~2Ma和1~0Ma共4个变形加速期。褶皱冲断带的演化过程为前展式,褶皱冲断带前锋向南推进的同时,后缘持续变形。     

定点式声学多普勒流速仪的应用难点与误差分析

定点式声学多普勒流速仪(简称"HADCP")在国内已较为普及,但对其应用却多停留在表面,鲜有人研究其测验误差控制及参数优化方法,影响HADCP测流精度。为解决HADCP使用中的一些疑难问题,从流速仪测验误差表现的三方面对HADCP的测流误差开展讨论。以测验误差为控制指标,对HADCP在使用中各个环节的误差来源及应用难点进行分析,并以多个实例阐明提高仪器应用精度的优化设置方法。按照所论及方法进行对照检查并合理优化,可减小测流误差,提高HADCP测流方案的整体精度。     

Seismic attenuation estimation using a complete ensemble empirical mode decomposition-based method

The frequency attenuation gradient method can provide important information for hydrocarbon detection. In this paper, a method using Complete Ensemble Empirical Mode Decomposition (CEEMD), Hilbert transform and the least-squares curve-fitting is proposed for seismic attenuation estimation as an effective frequency attenuation gradient estimation approach. We first use CEEMD to obtain the different Intrinsic Mode Functions (IMFs), which have a narrow band and can enhance the physical meaning of instantaneous attributes trace by trace. The time-frequency spectrum, which is computed using a Hilbert transform of each IMF, is represented as a spectrum with a single-peak that has narrow side lobes, which is conducive to frequency attenuation gradient estimation. Second, for each time sample, the frequency-amplitude spectrum of each IMF trace is extracted from the time-frequency spectrum to conduct the attenuation gradient computation. Then, the logarithm operation is performed for each IMF trace. Due to the very narrow bands of some IMFs in some seismic traces, a variable frequency window is adopted along the IMF trace according to the local data characteristics. Finally, the attenuation gradient for each IMF in a seismic trace can be computed using least-squares fitting. A different IMF reflects a seismic trace with a different spatiotemporal scale and can highlight different geologic and stratigraphic information. The correlation weighted average operation is used to highlight some useful details in seismic trace and obtains the attenuation gradient for each seismic trace. Field data examples demonstrate our method and its effectiveness. The proposed method can stably estimate the frequency attenuation gradient.