北部湾地区海砂填料的动力特性分析

为研究北部湾地区海砂填料的动力特性,采用高级动态三轴测试系统开展循环荷载下的动三轴试验,研究不同围压及不同动应力幅值对海砂动力特性的影响规律。试验结果表明：轴向累计应变随围压增加而减小,围压150 kPa时振次10 000后应变仅为3%;随着动应力幅值的增大轴向累积应变随之增大,且达到破坏标准的时间越短。动弹性模量随着动应力幅值和围压的增加而增大,不同围压下动弹性模量随动应变的增加出现先骤减再略减后稳定的发展趋势,ε_d>0.3%后开始趋于稳定;不同动应力幅值下动弹性模量出现先增后减直至稳定的趋势,其中动应力幅值对动弹性模量有明显的影响,围压影响相对较小。孔压比随动应力幅值增加而减小,随围压增加而增加。     

Impacts of confining pressure and safety thickness on water and mud inrush in weathered granite

Abstract

Due to the strong disintegration and water erosion of completely weathered granite, water and mud inrush disasters are apt to take place in this zone during underwater tunnel construction. The pore, compactness, seepage path length, fracture geometries and their interconnections for water and mud transfer are strongly influenced by confining pressure and waterproof-resistant slab safety thickness. In order to inspect the influence, a series of experiments based on a self-designed testing system and non-Darcy testing method were performed. The results indicated that the water and mud inrush evolution increased with the increase of confining pressure and decreased with the increase of safety thickness. In particular, the confining pressure mainly influences the initial evolution stage, and a critical safety thickness to prevent water and mud inrush is obtained. Besides, the non-Darcy testing method results shows that the water and mud inrush evolution affects the influence of non-Darcy flow. For example, while the safety thickness was smaller than the critical value, the evolution was large and unstable and its behavior transferred into nonlinear. In this case, the flow changed to non-Darcy flow.     

Theoretical aspects of cap-rock and fault seals for single- and two-phase hydrocarbon columns

Cap-rock seals can be divided genetically into those that fail by capillary leakage (membrane seals) and those whose capillary entry pressures are so high that seal failure preferentially occurs by fracturing and/or wedging open of faults (hydraulic seals). A given membrane seal can trap a larger oil column than gas column at shallow depths, but below a critical depth (interval), gas is more easily sealed than oil. This critical depth increases with lower API gravity, lower oil GOR and overpressured conditions (for the gas phase). These observations arise from a series of modelling studies of membrane sealing and can be conveniently represented using pressure/ depth (P/D) profiles through sealed hydrocarbon columns. P/D diagrams have been applied to the more complex situation of the membrane sealing of a gas cap underlain by an oil rim; at seal capacity, such a two-phase column will be always greater than if only oil or gas occurs below the seal.These conclusions contrast with those for hydraulic seals where the seal capacity to oil always exceeds that for gas. Moreover, a trapped two-phase column, at hydraulic seal capacity will be less than the maximum-allowed oil-only column, but more than the maximum gas-only column. Unlike membrane seals, hydraulic seal capacity should be directly related to cap-rock thickness, in addition to the magnitude of the minimum effective stress in the sealing layer and the degree of overpressure development in the sequence as a whole.Fault-related seals are effectively analogous to membrane cap-rocks which have been tilted to the angle of the fault plane. Consequently, all of the above conclusions derived for membrane cap-rocks apply to both sealing faults sensu stricto (fault plane itself seals) and juxtaposition faults (hydrocarbon trapped laterally against a juxtaposed sealing unit). The maximum-allowed two-phase column trapped by a sealing fault is greater than for equivalent oil-only and gas-only columns, but less than that predicted for a horizontal membrane cap-rock under similar conditions. Where a two-phase column is present on both sides of a sealing fault (which is at two-phase seal capacity), a deeper oil/water contact (OWC) in one fault block is associated with a deeper gas/oil contact (GOC) compared with the adjacent fault block. If the fault seal is discontinuous in the gas leg, however, the deeper OWC is accompanied by a shallower GOC, whereas a break in the fault seal in the oil leg results in a common OWC in both fault blocks, even though separate GOC's exist. Schematic P/D profiles are provided for each of the above situations from which a series of fundamental equations governing single- and two-phase cap-rock and fault seal capacities can be derived. These relationships may have significant implications for exploration prospect appraisal exercises where more meaningful estimates of differential seal capacities can be made.The membrane sealing theory developed herein assumes that all reservoirs and seals are water-wet and no hydrodynamic flow exists. The conclusions on membrane seal capacity place constraints on the migration efficiency of gas along low-permeabiligy paths at depth where fracturing, wedging open of faults and/or diffusion process may be more important. Contrary to previous assertions, it is speculated that leakage of hydrocarbons through membrane seals occurs in distinct pulses such that the seal is at or near the theoretically calculated seal capacity, once this has been initially attained.Finally, the developed seal theory and P/D profile concepts are applied to a series of development geological problems including the effects of differential depletion, and degree of aquifer support, on sealing fault leakage, and the evaluation of barriers to vertical cross-flow using RFT profiles through depleted reservoirs. It is shown that imbibition processes and dynamic effects related to active cross-flow across such barriers often preclude quantitative analysis and solution of these problems for which simulation studies are usually required.     

The buckling of plastic oblate hemi-ellipsoidal dome shells under external hydrostatic pressure

The paper presents a theoretical and an experimental investigation into the buckling of seven oblate hemi-ellipsoidal dome shells under external hydrostatic pressure. Four of the shells were made in glass reinforced plastic and three were made from a thermosetting plastic called solid urethane plastic. All the vessels were tested to destruction. The theoretical study was made with the aid of a non-linear finite element solution, where both geometrical and material non-linearity were allowed for. Good agreement was found between experiment and theory for all the vessels. The very oblate domes failed axisymmetrically. Theoretical convergence was good for the more oblate domes but it was not as good as for the less oblate domes. This may have been because the less oblate domes did not fail in a classical axisymmetric manner as was expected. This work is of much importance in ocean engineering.     

Buckling of multi-segment underwater pressure hull

Results of a numerical and experimental study into buckling performance of multi-segment pressure hull subjected to uniform hydrostatic pressure are discussed. Constituents of multi-segment configurations are bowed-out cylindrical shells with, and without flanges. Details about five collapse tests of laboratory scale mild steel, CNC machined models are given. Segments were about 200 mm diameter, 100 mm long and had uniform wall thickness of 3 mm. Experimental collapse pressures were in the range from 12 to 20 MPa. Numerical collapse pressures agreed well with those obtained during experiments.     

AEKF在星敏感器低频误差补偿中的应用

高分辨率对地观测卫星需要精确的姿态信息来满足后续对地定位等工作,因此姿态确定精度十分重要。星敏感器的低频误差是影响卫星姿态确定精度的重要因素之一,主要是由空间周期性的热环境变化引起的。为进一步提高卫星姿态确定精度,对星敏感器的低频误差产生机理即星敏感器主光轴做周期性扰动进行了分析,设计了星敏感器低频误差补偿方案,建立了考虑星敏感器低频误差在内的组合定姿模型,利用拓维卡尔曼滤波(AEKF)对低频误差进行补偿,并引入RTS平滑滤波进一步提高姿态确定精度。仿真实验表明,设计的星敏感器低频误差补偿方案能有效对其进行补偿,提高卫星姿态确定精度。     

Effects of long-term cyclic horizontal loading on bucket foundations in saturated loose sand

A 1-g model experimental study was conducted to investigate the accumulated rotations and unloading stiffness of bucket foundations in saturated loose sand. One-way horizontal cyclic loading was applied to model bucket foundations with embedment ratios 0.5 and 1.0. Up to 10⁴ cycles of loading were applied at a frequency of 0.2 Hz varying load amplitudes. The accumulated rotation of the bucket foundations increased with the number of cycles and the load amplitudes. Empirical equations were proposed to describe the accumulated rotation of the foundations. The unloading stiffness of foundations increased with the number of cycles but decreased with an increase in load amplitude. The initial unloading stiffness of L/D = 1.0 (L is skirt length; D is foundation diameter) was approximately twice that of L/D = 0.5. Excess pore water pressure difference of 50% was observed between L/D = 0.5 and 1.0. The suction and static capacity of the bucket increased with increase of bucket embedment ratio with a difference of 69.5% and 73.6% respectively between L/D = 0.5 and 1.0.     

Experimental investigation of tsunami bore impact pressure on a perforated seawall

Catastrophic failures of many tsunami barriers along the affected coasts during the 2011 Tohoku earthquake tsunami has prompted extensive investigation into improving and revising design codes for tsunami defence structures. To date, researchers and coastal engineers are investigating to understand the failure mechanisms and to find solutions so that the structures merely remain intact in the extreme event such as tsunami. Thus, the present work is motivated to experimentally study tsunami-induced bore pressures exerted on vertical seawalls; a solid vertical wall and a porous vertical seawall that consisted of a perforated front wall and a solid rear wall. Bores with various heights and velocities were generated by using the dam-break method. A porous seawall with 20% porosity of perforated front wall was used in this study. Bore pressures exerted on the solid rear wall and chamber oscillations that occurred in the experiments were also discussed. The experimental results showed that multiple peak pressures were observed during bore run-up phase in the time series of bore impacts. A predictive equation to estimate the maximum bore pressure on a perforated seawall was developed using multiple regression analysis. The proposed equation was also compared with previous empirical formulas.     

Ramifications of high in-situ temperatures for laboratory testing and inferred stress states of unlithified sediments – A case study from the Nankai margin

The recovery of drill cores involves changes in pressure and temperature conditions, which inevitably alter the mechanical properties of unlithified sediments. While expansion from unloading after core recovery is well studied, the effects from cooling on standard geotechnical tests are commonly neglected. Along the central portion of the Nankai margin sediments were recovered from high in-situ temperatures of up to 110 °C during IODP Leg 190. So far, the interpretation of the consolidation state of the Lower Shikoku Basin facies (LSB) entering the accretionary Nankai margin is ambiguous. Results from laboratory consolidation tests at room temperature show high pre-consolidation stresses. These were interpreted as hardening caused by cementation, while the field-based porosity vs. depth trend points towards normal consolidation. As an explanation for this discrepancy, the change of the mechanical properties by cooling from in-situ to laboratory conditions is proposed. In this paper, the results of a thermo-mechanical model are compared to published field data. This comparison suggests that the observed hardening is at least partially an artefact from cooling during core recovery, and that the strata may be considered normally consolidated to slightly overconsolidated. The latter can be explained by minor cementation or the influence of secondary consolidation. The results suggest that cooling from high in-situ temperatures may be important for the interpretation of the consolidation state of other sedimentary successions elsewhere.     

海洋生态环境监测传感器的应用与发展

受人类活动的影响,海洋污染日益严重。我国海岸带、河口和海湾生态系统均受到了不同程度的破坏。海洋生态环境监测传感器的应用可实现实时海洋环境的监测和快速预警,对于预防海洋灾害、调节海洋经济发展与环境之间的矛盾有重要意义。文中归纳了海洋生态环境类传感器所应用的分析检测技术,总结了目前所研发的各类海洋生态环境传感器,预测了传感器的发展趋势,并对我国未来传感器的研究工作提出了建议。