Iron isotopic systematics of UHP eclogites respond to oxidizing fluid during exhumation

The iron stable isotope compositions (δ⁵⁶Fe) and iron valence states of ultrahigh‐pressure eclogites from Bixiling in the Dabie orogen belt, China, were measured to trace the changes of geochemical conditions during vertical transportation of earth materials, for example, oxygen fugacity. The bulk Fe³⁺/ΣFe ratios of retrograde eclogites, determined by Mössbauer spectroscopy, are consistently higher than those of fresh eclogites, suggesting oxidation during retrograde metamorphism and fluid infiltration. The studied eclogites (five samples) display limited mid‐ocean ridge basalts (MORB)‐like (~0.10‰) δ⁵⁶Fe values, which are indistinguishable from their protoliths, that is, gabbro cumulates formed through differentiation of mantle‐derived basaltic magma. This suggests that Fe isotope fractionation during continental subduction is limited. Garnet separates display limited δ⁵⁶Fe variation ranging from ?0.08 ± 0.07 ‰ to 0.02 ± 0.07‰, whereas coexisting omphacite displays a large variation of δ⁵⁶Fe values from 0.15 ± 0.07‰ to 0.47 ± 0.07‰. Omphacite also has highly variable Fe³⁺/ΣFe ratios from 0.367 ± 0.025 to 0.598 ± 0.024, indicating modification after peak metamorphism. Omphacite from retrograde eclogites has elevated Fe³⁺/ΣFe ratios (0.54–0.60) compared to that from fresh eclogites (~0.37), whereas garnet displays a narrow range of ferric iron content with Fe³⁺/ΣFe ratios from 0.039 ± 0.013 to 0.065 ± 0.022. The homogenous δ⁵⁶Fe values and Fe³⁺/ΣFe ratios of garnet suggest that it survived the retrograde metamorphism and preserved its Fe‐isotopic features and ferric contents of peak metamorphism. Because of similar diffusion rates of Fe and Mg in garnet and omphacite, and constant Δ²⁶Mg_{omphacite‐garnet} values (1.14 ± 0.04‰), equilibrium iron isotope fractionation between garnet and omphacite was probably achieved during peak metamorphism. Elevated Fe³⁺/ΣFe ratios of omphacite from retrograde eclogites and variant Δ⁵⁶Fe_{omphacite‐garnet} values of the studied eclogites (0.13 ± 0.10‰ to 0.48 ± 0.10‰) indicate that oxidized geofluid infiltration resulted in the elevation of δ⁵⁶Fe values of omphacite during retrograde metamorphism.     

1999年北京持续高温天气过程的诊断分析

利用北京观象台观测资料和NCEP/NCAR再分析数据,对1999年6月24日至7月2日北京一次持续性高温天气的演变和发展过程及非绝热加热作用对系统的影响进行诊断分析,结果表明：在此次高温天气发生前,欧亚大陆中高纬度环流经向度很大,欧洲北部和贝加尔湖以南为高压脊控制,中亚和我国东北地区则处于低压槽内。贝加尔湖南部的高压脊纬向延伸范围较广,在东移过程中长时间影响北京。随着贝加尔湖以南的高压脊逐渐东移,北京上空下沉增温与非绝热加热作用有所增强,北京逐渐受到高温天气影响。在高温天气发生的后半阶段,我国东北的低压槽入海后在120130°E附近维持并发展,槽前非绝热加热率很大。从垂直方向来看,加热率在500 hPa以下随高度迅速增加,根据全型涡度方程,强烈的非绝热加热率垂直分布不均作为一个明显的涡度源区,对入海低压槽的稳定维持有显著的作用。而入海低压槽的稳定维持,又阻碍了华北高压脊的东移,使其在北京地区长时间稳定少动,为北京带来多日的持续性高温天气。     

FDR土壤水分传感器原状土壤标定方法研究

为获得测站准确的土壤水分传感器标定参数,利用自动土壤水分站点的大型原状土壤为样本,在实验室同时进行人工称重观测和仪器自动对比观测,得到一系列的人工自动测量数据,以人工称重数据为准对自动土壤水分传感器进行订正。由于采用原状土壤,样本土壤的质地、密度、土壤颗粒和结合紧密度基本没有受到破坏,订正后的自动土壤体积含水量值能更加真实反映台站实际土壤墒情,能够修订人工对比观测期间由于样本空间不足导致的不合理的田间标定方程。     

遥感数据融合的进展与前瞻

数据融合是提升遥感影像应用能力的重要手段,一直是遥感信息处理与应用领域的研究热点。本文系统综述了遥感数据融合的进展与前瞻:首先对数据融合的层次与分类进行了总结和归纳,将遥感数据融合划分为同质遥感数据融合、异质遥感数据融合、遥感—站点数据融合、遥感—非观测数据融合4大类;在此基础上,重点针对时—空—谱光学遥感数据的融合,从多视超分辨率融合、多尺度融合、空—谱融合、时—空融合、时—空—谱一体化融合等方面进行了详细阐述;最后总结了遥感数据融合的前瞻研究方向,包括时—空—谱一体化融合的拓展、空天地观测数据的跨尺度融合、传感网环境下的在线融合、面向应用的融合方法等。     

岩石中的压力影形成的实验观测研究

野外地质观察发现,在大陆地壳变质岩中可以广泛观察到围绕一个大的单晶或者硬质点的两端区域填充低粘度相物质形成的压力影。为了定量研究岩石材料中压力影的形成条件,本文利用高精度Paterson气体介质变形装置,对含有刚性球的圣卡罗橄榄石和洋中脊玄武岩(MORB)的混合物圆柱型样品进行了高温高压扭转变形试验。变形实验前样品的初始熔融均匀分布,比例为φ≈0.05,变形试件尺寸为D8.9mm×L5.5mm,内含8粒直径约1mm的刚性球。扭转变形试验温度为1473K,围压为300MPa,应变率为γ≈1×10~(-4)s~(-1),最大剪切变形为γ≈4。实验结果表明,岩石受到扭转力的作用产生变形之后,当局部剪切应变达到γ≈1时,可以在刚性球周围形成熔融富集带和熔融贫乏带,即压力影构造,围绕刚性球对称分布。由于熔融分布的不均一性,富集带熔融比例上升,最高可以达到φ_(high)=0.1~0.3,熔融贫乏带熔融比例下降,含量为φ_(low)=0.01~0.02。由于刚性球对其周围的压力分布的扰动区域大约为刚性球的尺度范围,因此,在离开刚性球一定距离后,熔融趋于均匀分布。     

Characteristics and Genetic Mechanisms of Overpressure in the Depressions of Bohai Bay Basin, China

The distribution and genetic mechanisms of abnormal pressures in the Bohai Bay Basin were systematically analyzed. Abnormal pressures are widely developed in the Bohai Bay Basin, primarily in the Paleogene E2s4, E2s3, Es1, and Ed formations. From the onshore area of the Bohai Bay Basin to the center of the Bozhong area, the top depth of the overpressured zone in each depression increases gradually, the overpressured strata in each depression gradually move to younger formations, and the pressure structure successively alters from single-bottom- overpressure to double-bottom-overpressure and finally to double-top-overpressure. The distribution of overpressured area is consistent with the sedimentary migration controlled by the tectonic evolution of the Bohai Bay Basin, which is closely related to the hydrocarbon-generation capability of active source rocks. The overpressured strata are consistent with the source-rock intervals in each depression; the top of the overpressured zone is synchronous with the hydrocarbon generation threshold in each depression; the hydrocarbon generation capability is positively correlated with the overpressure magnitude in each formation. Undercompaction was the main mechanism of overpressure for depressions with fluid pressure coefficients less than 1.2, whereas hydrocarbon generation was the main mechanism for depressions with fluid pressure coefficients greater than 1.5.     

钻孔压水试验水压式栓塞排水泄压问题研究

压水试验水压式栓塞较其他类型栓塞可靠、灵活,但一直存在试验结束后排水泄压难题,使该类型栓塞使用局限于浅孔及地下水位高的钻孔。本文对该问题进行了研究,提出了解决方案,设计了新型水压式栓塞结构。解决了一直以来水压式栓塞的排水泄压难题,突破了试验孔深限制,使水压式栓塞能得到广泛应用。介绍了该新型水压式栓塞的结构和工作原理以及工程应用效果。     

河元背地区绳索取心钻进泵压计算模型的建立与应用

泵压是反映金刚石绳索取心钻进时井内作业是否正常的重要参数。为了进一步研究泵压波动变化与实际钻进作业之间的关系,指导钻进工作的快速、安全开展,结合江西相山河元背地区CUSD2井实际泵压波动数据及相关钻进资料,建立了适用于本井的循环系统压力损失计算模型。对比分析模型计算的理论泵压与实际泵压的波动变化趋势,将模型应用于实际钻进,在此基础上预测后续地层的泵压波动区域范围,发现7 MPa的泵压安全值不再适用于后续地层钻进,调整设置泵压安全值为10 MPa,并利用邻井泵压波动数据进一步验证其可靠性。适当调整修正理论模型,使其可应用于河元背以及相山地区绳索取心钻进中,指导该地区钻探工作。     

一种越浪式波能发电装置越浪量和波压力的试验研究

越浪式发电装置具有结构稳定、可靠性高等优点。在前人的研究基础上,对越浪式波能发电装置的模型进行了优化设计,通过模型实验研究了该波能发电装置在不同波况、不同干舷高度下对波能的俘获能力以及结构的受力情况。对越浪量的试验结果进行了无量纲分析,分别得出了越浪式模型装置的越浪量关于干舷高度和波高的指数函数拟合曲线,总结了两者对越浪量影响的普遍规律。通过对规则波和不规则波波浪作用下装置受力结果的归纳总结,探讨了波能装置波压力和浮托力变化的一般规律。本研究可为越浪式波能发电装置的研究提供参考依据,为波浪能的利用提供一定的参考价值。     

Failure Pressure Analysis of Corroded Moderate-to-High Strength Pipelines

Based on the elastic-plastic, large-deformation finite element method, burst capacity of steel pipeline with longitudinal corrosion defect subjected to internal pressure is studied. The appropriate stress-based criterion is used to predict the failure pressure of finite element model of corroded pipeline under internal pressure. By considering the pipe steel grades and geometries of corrosion defects, a series of finite element analyses is conducted. The effects of corrosion depth, length and width on burst capacity are also discussed. A specific failure pressure solution for the assessment of corrosion defects in moderate-to-high strength pipeline is proposed on the base of numerical results. The failure pressures predicted by the proposed method are in better agreement with the experimental results than the results by the other methods.