Statistics of wave forces on large horizontal cylinders

To the first order in a Stokes expansion, the pressure force exerted by a sea state on a large horizontal cylinder represents a stationary random Gaussian process. A relationship is obtained between the spectrum of this process and the wave spectrum. As a consequence, the basic statistical properties of the height and period of the individual waves of the force-process are also obtained. It is proven that these statistical properties agree very well with the data from a small scale field experiment.     

Experimental studies on the slowly varying drift motion of a berthed container ship model

The effects of free-surface waves on the floating structures are of great importance in the offshore industry. Among the six degrees of motions of a surface ship the absence of restoring forces in surge, sway and yaw led to critical situations for moored ships in the recent times. The order of forces in horizontal plane and their exciting frequencies are matters of interest. The resonance with the presence of moored chains led to many accidents in the recent past. The lines in dry conditions may not give good damping and in wet condition they may trigger the system to chaotic motions and jumps. Two different loading conditions of a container ship model are tested with waves in laboratory conditions in two different drafts. The mooring lines are chosen as per scale law and the energy under the response spectrum is determined from the plots. The results give new insights into the movement of a berthed ships subjected to waves. Response of the moored ship to different loading conditions in different water depths are discussed in this paper. The paper gives the order of energy due to first-order and slowly varying movement of a berthed container model in a towing tank.     

Analysis of seabed instability using element free Galerkin method

Wave-induced seabed instability, either momentary liquefaction or shear failure, is an important topic in ocean and coastal engineering. Many factors, such as seabed properties and wave parameters, affect the seabed instability. A non-dimensional parameter is proposed in this paper to evaluate the occurrence of momentary liquefaction. This parameter includes the properties of the soil and the wave. The determination of the wave-induced liquefaction depth is also suggested based on this non-dimensional parameter. As an example, a two-dimensional seabed with finite thickness is numerically treated with the EFGM meshless method developed early for wave-induced seabed responses. Parametric study is carried out to investigate the effect of wavelength, compressibility of pore fluid, permeability and stiffness of porous media, and variable stiffness with depth on the seabed response with three criteria for liquefaction. It is found that this non-dimensional parameter is a good index for identifying the momentary liquefaction qualitatively, and the criterion of liquefaction with seepage force can be used to predict the deepest liquefaction depth.     

Depth and Seasonal Distribution of Some Groups of the Vagile Fauna of the Posidonia oceanica Leaf Stratum: Structural and Trophic Analyses

Abstract. The taxonomical and trophic structures of the vagile fauna communities of the leaf stratum in a Posidonia oceanica meadow at Ischia (Gulf of Naples, Italy) were investigated at five stations along a depth gradient (1 to 25 m). Sampling was performed in July, November, February, and May. The analyzed groups - polychaetes, molluscs, tanaids, isopods, amphipods, and decapods - exhibited similar distributional trends in all seasons, with coenotic discontinuities occurring at well-defined depths. The same zonation pattern was produced by feeding-guild analysis. Eleven trophic groups were identified. The most abundant groups were: Herbivores, which were found mainly at the shallow stations; Herbivores-deposit feeders, which were widely distributed along the transect; Deposit feeders-carnivores, found mainly at the deep stations.
This study suggests that in the Posidonia leaf stratum, herbivores and herbivores-deposit feeders, as consumers of epiphytic micro- and macroflora and deposited particulate organic matter, play an important role in the energy transfer from producers to higher trophic levels of the system.     

Drag force on a circular cylinder in unseparated laminar high Reynolds number nonlinear random oscillatory flow

The stochastic properties of the drag force maxima on a circular cylinder subjected to nonlinear random waves are investigated. Unseparated laminar high Reynolds number flow is considered. A simplified approach based on second order Stokes waves is presented, including the sum-frequency effect only. It is demonstrated how a drag force formula valid for regular linear waves can be used to find the cumulative distribution function of individual drag force maxima for nonlinear irregular waves. Here the [Wang, 1968] drag force coefficient is used.     

Influence of large-diameter pipe pile driving on surrounding marine soils and adjacent submarine pipelines

Abstract

With the large-scale development and utilization of ocean resources and space, it is inevitable to encounter existing submarine facilities in pile driving areas, which necessitates a safety assessment. In this article, by referring to a wharf renovation project as a reference, the surrounding soil response and buried pipe deformation during pile driving in a near-shore submarine environment are investigated by three-dimensional (3D) numerical models that consider the pore water effect. Numerical studies are carried out in two different series: one is a case of a single pile focusing on the effect of the minimum plane distance of the pile–pipe, and the other is a case of double piles focusing on the effect of the pile spacing.     

Investigation of the hydrate reservoir production under different depressurization modes

Abstract

Large reserves of natural gas hydrates exist, and the depressurization method has the greatest potential for gas hydrate reservoir recovery. Currently, the most commonly adopted depressurization simulation method is a constant bottom-hole pressure production scheme. This study proposes a new depressurization mode with decreasing bottom-hole pressure. The production characteristic was numerically investigated using this method. The results show the following: (1) As the depressurization exponent (n) decreases, the development effect improves, and production indexes including cumulative gas production/dissociation and gas-water ratio increase. However, the reservoir energy consumption is higher and the hydrate reformation is more severe. (2) Compared to the proposed depressurization mode, the hydrate production index of the constant bottom-hole pressure production (n?=?0) is better. However, the hydrate reservoir energy consumption is higher and the hydrate reformation is more severe using constant bottom-hole pressure production. (3) To achieve a balance between production and reservoir energy consumption during depressurization production, the bottom-hole pressure should be controlled by selecting a suitable depressurization exponent between n_min and n_max, which can be determined through numerical simulations.     

Preconditioned Optimizing Utility for Large-dimensional analyses (POpULar)

I present the derivation of the Preconditioned Optimizing Utility for Large-dimensional analyses (POpULar), which is developed for adopting a non-diagonal background error covariance matrix in nonlinear variational analyses (i.e., analyses employing a non-quadratic cost function). POpULar is based on the idea of a linear preconditioned conjugate gradient method widely adopted in ocean data assimilation systems. POpULar uses the background error covariance matrix as a preconditioner without any decomposition of the matrix. This preconditioning accelerates the convergence. Moreover, the inverse of the matrix is not required. POpULar therefore allows us easily to handle the correlations among deviations of control variables (i.e., the variables which will be analyzed) from their background in nonlinear problems. In order to demonstrate the usefulness of POpULar, we illustrate two effects which are often neglected in studies of ocean data assimilation before. One is the effect of correlations among the deviations of control variables in an adjoint analysis. The other is the nonlinear effect of sea surface dynamic height calculation required when sea surface height observation is employed in a three-dimensional ocean analysis. As the results, these effects are not so small to neglect.     

Application of Atomic Force Microscopy to Observation of Marine Bacteria

The atomic force microscopy (AFM) is a recently developed, bench-top instrument that can image the surface structures of biological specimens at high resolution with simultaneous measurement of their size. This paper describes the application of AFM to marine bacteria. Both natural and cultured bacteria were retained on a filter or placed on glass, washed, air-dried and observed by AFM. The instrumental condition, the choice of suitable filter, effect of fixation and filtration, comparison with epifluorescent microscopic (EFM) count, and the size and shape of bacterial cells were investigated. An Isopore filter was best for concentration and subsequent observation because of its surface flatness. Cross section images showed that both rod and coccoid cells were flattened, the former usually having a two-humped shape. Bacterial cells were differentiated from non-living particles based on their cross section shape and size. Bacterial counts by AFM and EFM showed good agreement. Although size measurement is easily done by the instrument, AFM tends to overestimate the size of microspheres. More work is thus needed on the size measurement of living organisms. Because AFM easily provides images of natural bacterial cells at high magnification, it can be used as a new tool to study the fine structures of marine bacteria. This revised version was published online in July 2006 with corrections to the Cover Date.     

Experimental Study on Friction Coefficient Between Concrete and the Top Surface of Rubble Mound Foundation

Experimental studies on the friction coefficient between concrete and the top surface of a rubble mound foundation in China are reviewed. Through comparison of different test results, the development of this research is comprehensively analyzed. An experiment is carried out in the condition similar to prototype. The process curve of friction coefficient with the test block sliding is analyzed and a standard for determination of the friction coetfficient is defined. The variation features of the friction coefficient are analyzed on the basis of the present experimental results and other studies in China. It is shown that the friction coettfficient between concrete and the top surface of a rubble mound foundation decreases with the increase of the foundation pressure, and the friction coettqcient for a very fine leveling bed is smaller than that for a fine leveling bed.