Tripartite climate reversal in Central Europe 5600-5300 years ago

The history of variations in water level of Lake Constance, as reconstructed from sediment and pollen analysis of a sediment sequence from the archaeological site of Arbon-Bleiche 3, shows an abrupt rise in lake level dendrochronologically dated to 5375 yr ago (5320 yr relative to AD 1950). This event, paralleled by the destruction of the Neolithic village by fire, provoked the abandonment of this prehistoric lake-shore location established in the former shallow bay of Arbon-Bleiche, and was the last of a series of three episodes of successively higher lake level, the first occurring at 5600-5500 cal yr B.P. The dendrochronologically dated rise event was synchronous with an abrupt increase in atmospheric ¹⁴C. This supports the hypothesis of an abrupt climate change forced by varying solar activity. Moreover, the three successive episodes of higher lake level between 5600 and 5300 cal yr B.P. at Arbon-Bleiche 3 coincided with climatic cooling and/or changes in moisture conditions in various regions of both hemispheres. This period corresponds to the mid-Holocene climate transition (onset of the Neoglaciation) and suggests inter-hemispheric linkages for the climate variations recorded at Arbon-Bleiche 3. This mid-Holocene climate reversal may have resulted from complex interactions between changes in orbital forcing, ocean circulation and solar activity. Finally, despite different seasonal hydrological regimes, the similarities between lake-level records from Lake Constance and from Jurassian lakes over the mid-Holocene period point to time scale as a crucial factor in considering the possible impact of climate change on environments.     

Some breakage characteristics of ultra-fine wet grinding with a centrifugal mill

A centrifugal mill is a high-power intensity media mill that can be used for ultra-fine grinding, employing centrifugal forces generated by gyration of the axis of the mill tube in a circle. The mill charge motion is quite different depending on the ratio of the gyration diameter to the mill diameter (G / D ratio), varying from a motion similar to that of a conventional tumbling media mill to that of a vibration mill. In this study, a centrifugal mill was constructed with an arrangement where the gyration diameter could be readily adjusted. The batch grinding characteristics of three different minerals (limestone, talc and illite) in water with dispersing agent were investigated at various G / D ratios. It was found that the optimum G / D ratio in terms of the specific energy consumption to give a desired fineness of product was different for the three minerals. This was due to their different reactions to the breakage mechanisms provided by the mill charge motion at varying G / D ratios. The size distributions became progressively narrower at increased grinding times, and particles finer than about 0.1 μm were not detected even for prolonged grinding times. Measurement of specific surface areas indicated that this was not due to an artifact of the size measurements by laser diffractometry. This implies that there is a limitation in which particles finer than 0.1 μm are not produced under the conditions tested in this type of mill, but further investigation is needed for experimental verification of this limit of comminution.     

On the role of heat flow, lithosphere thickness and lithosphere density on gravitational potential stresses

Gravitational potential stresses (GPSt) are known to play a first-order role in the state of stress of the Earth's lithosphere. Previous studies focussed mainly on crust elevation and structure and little attention has been paid to modelling GPSt using realistic lithospheric structures. The aim of the present contribution is to quantify gravitational potential energies and stresses associated with stable lithospheric domains. In order to model realistic lithosphere structures, a wide variety of data are considered: surface heat flow, chemical depletion of mantle lithosphere, crustal thickness and elevation. A numerical method is presented which involves classical steady-state heat equations to derive lithosphere thickness, geotherm and density distribution, but additionally requires the studied lithosphere to be isostatically compensated at its base. The impact of varying surface and crustal heat flow, topography, Moho depth and crust density on the signs and magnitudes of predicted GPSt is systematically explored. In clear contrast with what is assumed in most previous studies, modelling results show that the density structure of the mantle lithosphere has a significant impact on the value of the predicted GPSt, in particular in the case of thick lithospheres. Using independent information from the literature, the method was applied to get insights in the state of stress of continental domains with contrasting tectono-thermal ages. The modelling results suggest that in the absence of tectonic stresses Phanerozoic and Proterozoic lithospheres are spontaneously submitted to compression whereas Archean lithospheres are in a neutral to slightly tensile stress state. These findings are in general in good agreement with global stress measurements and observed geoid undulations.     

中国能源安全与南海开发

二十一世纪是海洋经济时代。随着我国经济的发展,能源问题日益突出。由于我国陆上石油资源日益枯竭,海上石油开发成为我国能源的战略重点。南海陆架新生代地层厚约2000～3000m。第三纪沉积有海相、陆相及海陆交互相,具有良好的生油和储油岩系。南海扼海上要冲-马六甲海峡,南海航线是我国能源的海上生命线,具有不可替代的战略地位。我国南海资源和海域主权遭受到极大的侵犯。发展深海油气的勘探和开发技术,开发我国的南海深水石油资源,维护我国海域主权已经刻不容缓。优先进行南海石油开发是破解我国石油能源困局的必选战略。     

Rock fracturing by explosive energy: review of state-of-the-art

A study of the dynamic rock fracture initiation and propagation due to explosive energy is presented through a detailed state-of-the-art review. Explosive energy dissipation in crushing and fracturing is examined and the various means to enhance the explosive energy utilization for dynamic rock fracturing are reviewed. The study highlights the need for a better understanding of the dynamic fracturing process particularly in the presence of in situ stresses in the rock mass.     

Asking the right questions: environmental conflict in the case of Azerbaijan

This paper contributes an empirical test of key themes of the literature on natural resource conflict. Survey and interview data from an ongoing project in Azerbaijan provide insights into an unexpected lack of conflict in Azerbaijan related to the environment, resources and energy despite the predictions of resource conflict literature. We contend that questions about public perceptions about the environment and other daily concerns are critical if we are to understand who is likely (or unlikely) to be involved in conflict and why. The data presented in this paper demonstrate that Azerbaijani citizens rank environmental and resource issues among their immediate concerns and their top concerns for the country. However, compared to other day-to-day concerns such as the Nagorno-Karabakh conflict and economic concerns, environment-related concerns do not appear to be sufficient to motivate widespread violent conflict or citizen dissent related to environmental or natural resource conditions.     

Net Energy Payback and CO2 Emissions from Three Midwestern Wind Farms: An Update

This paper updates a life-cycle net energy analysis and carbon dioxide emissions analysis of three Midwestern utility-scale wind systems. Both the Energy Payback Ratio (EPR) and CO₂ analysis results provide useful data for policy discussions regarding an efficient and low-carbon energy mix. The EPR is the amount of electrical energy produced for the lifetime of the power plant divided by the total amount of energy required to procure and transport the materials, build, operate, and decommission the power plants. The CO₂ analysis for each power plant was calculated from the life-cycle energy input data. A previous study also analyzed coal and nuclear fission power plants. At the time of that study, two of the three wind systems had less than a full year of generation data to project the life-cycle energy production. This study updates the analysis of three wind systems with an additional four to eight years of operating data. The EPR for the utility-scale wind systems ranges from a low of 11 for a two-turbine system in Wisconsin to 28 for a 143-turbine system in southwestern Minnesota. The EPR is 11 for coal, 25 for fission with gas centrifuge enriched uranium and 7 for gaseous diffusion enriched uranium. The normalized CO₂ emissions, in tonnes of CO₂ per GW_eh, ranges from 14 to 33 for the wind systems, 974 for coal, and 10 and 34 for nuclear fission using gas centrifuge and gaseous diffusion enriched uranium, respectively.     

Identification of sources of chemical constituents in groundwater from the Vilnius wellfields, Lithuania

The only source of drinking water in Vilnius City, Lithuania's capital, is groundwater. It can be supplied from 20 wellfields situated in the City or its environs. About half of them (11) are located in the valley of the Neris River crossing the City. The exploited aquifers were formed by melting continental glaciers and modified by the river. Until 1990 groundwater resources had not been conserved—the per capita consumption for domestic use in Vilnius reached 350 l/day. After 1990, due to the increasing cost of supplying drinking water, its consumption was reduced by a factor of three. As pumping rates of wellfields in Vilnius were increased or decreased, the groundwater quality was changed significantly. It is mainly affected by the surface water and shallow aquifers of the hydrologic system. The unoxidised organic matter that enters the exploitable aquifers from rivers and polluted shallow groundwater consumes scarce oxygen resources, thus creating anoxic conditions favourable for increasing the accumulation of iron, manganese and ammonium. Modelling and monitoring data show that the concentrations of sulphates and chlorides in Vilnius wellfields indicate not only the rise of brackish water from below, but also downward seepage of polluted surface water into the aquifers.     

Determination of specific yield using a water balance approach – case study of Torla Odha watershed in the Deccan Trap province, Maharastra State, India

Specific yield is an essential parameter for any groundwater management plan. Volumetric analysis in the domain of groundwater budgeting for the non-monsoon months has been undertaken for a typical watershed of the Deccan basalt province. The Torla Odha watershed covers an area of over 22 km² on a third-order tributary of the westerly flowing Bhima River. The watershed receives a normal annual rainfall of 643 mm. The entire water demand is supplied by dug wells, which penetrate a shallow aquifer. The specific yield was estimated by comparing the monthly net volume of water removed from the aquifer, with the volume of aquifer de-saturated, based on monthly water level data. The estimated specific yield ranges from 0.0019 in May to 0.0173 in November with an average value of 0.0093. A correlation of the groundwater levels with the detailed geology suggests that the higher specific yield value (0.017) corresponds to dewatering of the weathered zone within the shallow aquifer. The specific yield of the massive basalt immediately below the weathered zone varies from 0.0089 to 0.0103. The underlying vesicular basalt, which is dissected by sheet joints, has a relatively higher specific yield (0.0121). The massive basalt, which forms the base of the shallow aquifer system, has a lower specific yield from 0.0019 to 0.0022.

---

Résumé Le débit spécifique est un paramètre essentiel pour tout plan de gestion des eaux souterraines. Les analyses volumétriques, dans le cadre des bilans hydriques des eaux en dehors des mois de mousson, ont été entreprises pour un bassin-versant typique de la province basaltique du Deccan. Le bassin-versant du Torla Odha couvre une superficie de 22 km², et alimente l’affluent du troisième ordre de la rivière Bhima, qui coule vers l’Ouest. La pluviométrie annuelle atteint 643 mm. Toute la demande en eau es assurée par des puits foncés pénétrant dans l’aquifère phréatique. Le débit spécifique a été estimé en comparant le volume net mensuel d’eau captée dans l’aquifère, avec le volume de l’aquifère dé-saturé, basé sur les données des niveaux piézométriques mensuels. Le débit spécifique estimé s’étend entre 0,0019 en Mai et 0.173 en Novembre; la moyenne se situe à 0,0093. Une corrélation entre les niveaux des eaux souterraines et la géologie, suggère que les débits spécifiques les plus importants (0,017) correspondent aux zones altérées de l’aquifère phréatique. Le débit spécifique du massif basaltique, immédiatement sous la zone altérée, varie entre 0,0089 et 0,0103. Le basalte vésiculaire, situé juste en dessous et traversé par des diaclases parallèles, possède un débit spécifique sensiblement plus élevé (0,0121). Le basalte massif, qui forme la base de l’aquifère phréatique, possède un débit spécifique moins important, compris entre 0,0019 et 0,0022.

---

Resumen El rendimiento específico es un parámetro esencial para cualquier plan de manejo de aguas subterráneas. Se ha llevado a cabo el análisis volumétrico, en el entorno de balance de aguas subterráneas, para los meses sin monzón de una cuenca típica de la provincia de basaltos Deccan. La cuenca Rorla Odha cubre un área de 22 km² en un tributario de tercer orden del Río Bhima que fluye al oeste. La cuenca capta una lluvia anual normal de 643 mm. La totalidad de la demanda de agua es abastecida por pozos manuales que penetran un acuífero somero. Se estimó el rendimiento específico al comparar el volumen neto mensual de agua removido del acuífero con el volumen de agua de-saturado estimado a partir de datos de niveles de agua mensuales. Los valores estimados de rendimiento específico varían de 0.0019 en mayo a 0.0173 en noviembre con un valor promedio de 0.0093. La correlación de niveles de agua subterránea con la geología de detalle sugieren que el valor más alto (0.017) de rendimiento específico corresponden con el desaguado de la zona de intemperismo dentro del acuífero somero. El rendimiento específico del basalto masivo que se encuentra inmediatamente debajo de la zona de intemperismo varía de 0.0089 a 0.0103. El basalto vesicular subyacente, el cual está disectado por fracturas laminares, tiene un rendimiento específico relativamente más alto (0.0121). El basalto masivo, que forma la base del sistema de acuífero somero, tiene un rendimiento específico más bajo el cual varía de 0.0019 a 0.0022. Palabras clave: basalto Deccan. India. Rendimiento específico. Recarga de agua subterránea. Balance hídrico.

     

山西沁水盆地煤层气成藏的微观动力能条件研究

煤层气成藏的微观动力能条件主要包括煤储层的孔隙—裂隙系统、煤储层的生气作用和储气作用两个方面。以山西沁水盆地为例,深入剖析了煤储层的孔隙—裂隙系统及其发育历程、煤储层的生气作用与能量聚散,阐明了煤层气成藏的微观动力能对成藏效应的控制作用。结果表明:构造作用对储层渗透率具有明显的控制作用,成烃增压致使能量聚集,成为盖层突破作用的主要驱动力,而能量放散则主要是通过煤储层孔隙—裂隙系统的产生、发展。根据上述研究成果,沁水盆地煤层气成藏的地质区划结果为:盆地南部的有利区带为阳城和晋城的北部地区,包括潘庄、樊庄、郑庄等地区;盆地中部的有利区带为安泽—沁源地区,位于盆地西斜坡的中南部;盆地北部的可能有利区带为寿阳东南部地区,位于榆次东北部和阳泉西南部之间。