Analysis of Post-Failure Slope Movements within the Framework of Hazard and Risk Analysis

The paper first recalls briefly a methodological framework to assess landslide hazard and risk analysis in terms of predisposition, triggering andrevealing factors. This framework, that reflects the mechanisms involved in the landslide, is based on the Geotechnical Characterisation of slope movements proposed by Vaunat et al. (1994) and Leroueil et al. (1996). The Geotechnical Characterisation can be schematized by a 3-D matrix having the following axes: types of movement; types ofmaterial; and the four stages of movement: pre-failure, failure, post-failure andreactivation. For each relevant element of this 3-D matrix, there is a characterisationsheet including: the controlling laws and parameters, the predisposition factors, thetriggering or aggravating factors, the revealing factors and the consequences of the movement. The paper focuses afterwards on the post-failure stage, which generallyis the most destructive, and on the mobility index. It is shown that this laterindex can be described as the product of sub-indices associated with failure, brittlenessof the material, ability of the soil to develop pore pressures, geometry of the moving soil mass and characteristics of the terrain. It is also shown how these aspectscan be incorporated into the Geotechnical characterisation of slope movements. This seems to provide a rational basis for examining slope movements at the post-failure stage and assessing associated risks.     

川滇黔桂76种元素地球化学图编制中分析方法与分析质量研究(一) 不同实验室产生地球化学图的相似性——以Ag、Cs、Ga、Ge为例

编制中国76种元素地球化学图将使我们首次了解元素周期表上除氢、氧及惰性气体之外所有元素在中国大陆表层的分布,川滇黔桂76种元素地球化学图的编制是这一研究项目的试点。本文以不同实验室取得的Ag、Cs、Ga、Ge分析数据为例,探索、衡量不同实验室地球化学图相似性的方法,以优选实验室进行川滇黔桂4省区约4000件组合样76种元素的大规模分析工作。     

Fitness-for-Purpose of Reference Material Reference Values in Relation to Traceability of Measurement, as Illustrated by USGS BCR-1, NIST SRM 610 and IAEA NBS28

As in all fields of sample analysis, reference materials play a large role in supporting measurements in the geosciences. While a rather large number of materials are in distribution (> 380), not all are equally effective or fit-for-purpose in supporting laboratory data quality and thereby assuring the desired comparability of measurements between laboratories. Equally important, reference values that are not fit-for-purpose cannot be used effectively to establish traceability links between laboratory measurements and national and international standards. The needed fitness-for-purpose is not achieved for reference values either when more than one reference value has been proposed and a consensus does not exist among users as to which should be used by all, or when reference value uncertainties are too large in comparison to those of routine laboratory measurements. The focus of this review will be, first to outline the current reality, and second to suggest ways in which certifications of RMs can be improved to provide reference values that are universally accepted and more fit-for-purpose in general laboratory use. The discussion will be illustrated largely by current uses of USGS BCR-1, NIST SRM 610 and IAEA NBS28, as these three materials are those for which the largest body of newly published data exists, according to recent bibliographies of the geoanalytical literature published annually in Geostandards Newsletter: The Journal of Geostandards and Geoanalysis.     

有限弹性变形地壳中的地震波

地壳由半无限大的基岩上一层厚度为H^-的表土层组成，入射地震波为垂直的SH波，产生水平地面运动。当浅源大地震发生时，在极震区以外行波传播产生地面运动将使地壳介质有非线性的有限弹性变形。用小参数摄动法使非线性控制方程为线性化的小参数各阶控制方程，得出头两阶线性控制方程的解析解。     

A HORIZONTAL 2-D HYDRAULIC NUMERICAL MODEL AND IT’S APPLICATIONS TO FLOOD FORECAST

1 INTRODUCTION There were many flood disasters in China in recent years. When the water level in a river is very high, weak parts of its dike may be destroyed resulted in the submersion of the protected land and properties. It is of significance for decision-makers to exactly predict the processes of flood propagation during flood control. There are many modes of dike bursting, such as seepage destroying by overflow on top of dike caused by dike body sinking induced by piping and soil fl…     

The use of modern statistical theories in the assessment of earthquake hazard, with application to quiet regions of eastern North America

It is generally accepted that both deterministic and statistical approaches are useful for the characterization of earthquake hazard. Although the most reliable estimates of seismic hazard can only be based on an improved understanding of the earthquake mechanism, efficient utilization of the appropriate methods provided by recent statistical theories is also important in seismic risk analysis. This is especially true in regions where the connection between seismicity and geologic structure is tenuous at best. We are particularly interested in developing better statistical treatments of data for regions with little known seismic activity. To this end, we have applied three statistical methods to the historical record of seismicity in relatively quiet regions of eastern North America. These are: (1) the threshold method for tail inference, a new theory for modeling earthquakes with sizes above a given threshold, (2) the ‘bootstrap’ technique in which the characteristics of an unknown population are simulated by replacing the true population by an estimated one, and (3) a technique to estimate the number of earthquakes below a given size, in order to compensate for the under-reporting of small earthquakes in most catalogs. A combination of these techniques has been used to estimate the probabilities of future large earthquakes for the regions studied. Because of limitations imposed by existing catalogs, the size estimate used has been maximum intensity.     

Paleolatitudes of the Kerguelen hotspot: new paleomagnetic results and dynamic modeling

The Kerguelen Plateau, a Large Igneous Province in the southern Indian Ocean, was formed as a product of the Kerguelen hotspot in several eruptive phases during the last 120 Myr. We obtained new paleolatitudes for the central and northern Kerguelen Plateau from paleomagnetic investigations on basalts, which were drilled during ODP Leg 183 to the Kerguelen Plateau-Broken Ridge. The paleolatitudes coincide with paleolatitudes from previous investigations at the Kerguelen Plateau and Ninetyeast Ridge (the track of the Kerguelen hotspot) and indicate a difference between paleolatitudes and present position at 49°S of the Kerguelen hotspot. We show that true polar wander, the global motion between the mantle and the rotation axis, cannot explain this difference in latitudes. We present numerical model results of plume conduit motion in a large-scale mantle flow and the resulting surface hotspot motion. A large number of models all predict southward motion between 3° and 10° for the Kerguelen hotspot during the last 100 Myr, which is consistent with our paleomagnetic results.     

Bedrock structure in Adapazari, Turkey—a possible cause of severe damage by the 1999 Kociaeli earthquake

The 1999 Kocaeli earthquake brought serious damage to downtown of Adapazari. To study why strong motions were generated at the town, a bedrock structure was investigated on the basis of Bouguer gravity anomaly, and SPAC and H/V analyses of microseisms. It was revealed that, the basin consists of three narrow depressions of bedrock with very steep edges, extending in E–W or NE–SW directions along the North Anatolia faults, and the depth to bedrock reaches 1000 m or more. Downtown of Adapazari is located 1–2 km apart from the basin-edge. It is considered that, the specific configuration of bedrock amplifies ground motions at the downtown area by focusing of seismic waves and/or interference between incident S-waves and surface-waves secondarily generated at the basin-edge. Studying 3D bedrock structure is an urgent issue for microzoning an urban area in a sedimentary basin.     

Effective stress analyses of liquefaction-induced deformation in river dikes

A series of effective stress analyses is carried out on the seismic performance of river dikes based on the case histories during the 1993 Hokkaido-Nansei-oki and 1995 Hyogoken-Nambu earthquakes in Japan. Seven case histories selected for the analyses involve a crest settlement ranging from none to 2.7 m in the dikes 3–6 m high with evidence of liquefaction at foundation soil. The effective stress model used is based on a multiple shear mechanism and was developed by one of the authors. The soil parameters are evaluated based on the site investigation and laboratory test results. The results of the analyses are basically consistent with the observed performance of the river dikes. In particular, the effective stress model shows a reasonable capability to reproduce the varying degree of settlements depending on the geotechnical conditions of foundation soils beneath the dikes. The analyses also indicate that the effect of a cohesive soil layer mixed with the liquefiable sand layers beneath the dikes can be a primary factor for reducing the liquefaction-induced deformation of dikes.     

Efficient methods for solving water flow in variably saturated soils under prescribed flux infiltration

The non-linear solvers in numerical solutions of water flow in variably saturated soils are prone to convergence difficulties. Many aspects can give rise to such difficulties and in this paper we address the gravity term and the prescribed-flux boundary in the Picard iteration. The problem of the gravity term in the Picard iteration is iteration-to-iteration oscillation as the gravity term is treated, by analogy with the time-step advance technique, ‘explicitly’ in the iteration. The proposed method for the gravity term is an improvement of the ‘implicit’ approach of Zhang and Ewen [Water Resour. Res. 36 (2000) 2777] by extending it to heterogeneous soil and approximating the inter-nodal hydraulic conductivity in the diffusive term and the gravity term with the same scheme. The prescribed-flux boundary in traditional methods also gives rise to iteration-to-iteration oscillation because there is no feedback to the flux in the solution at the new iteration. To reduce such oscillation, a new method is proposed to provide such a feedback to the flux. Comparison with traditional Picard and Newton iteration methods for a wide range of problems show that a combination of these two proposed methods greatly improves the stability and consequently the computational efficiency, making the use of small time step and/or under-relaxation solely for convergence unnecessary.