辽河盆地曙1区稠油油藏中原油的混聚及其勘探开发意义

本文通过辽河盆地曙1 区稠油地化特征的非均质分析确认了原油混聚的存在,并认为这是第三纪以来来自相邻凹陷内沙四油气两期充注的结果。这一发现对本区的石油勘探开发具有重要的实际价值。     

Reflection of equatorial Kelvin waves at eastern ocean boundaries Part I: hypothetical boundaries

A baroclinic shallow-water model is developed to investigate the effect of the orientation of the eastern ocean boundary on the behavior of equatorial Kelvin waves. The model is formulated in a spherical polar coordinate system and includes dissipation and non-linear terms, effects which have not been previously included in analytical approaches to the problem. Both equatorial and middle latitude response are considered given the large latitudinal extent used in the model. Baroclinic equatorial Kelvin waves of intraseasonal, seasonal and annual periods are introduced into the domain as pulses of finite width. Their subsequent reflection, transmission and dissipation are investigated. It is found that dissipation is very important for the transmission of wave energy along the boundary and for reflections from the boundary. The dissipation was found to be dependent not only on the presence of the coastal Kelvin waves in the domain, but also on the period of these coastal waves. In particular the dissipation increases with wave period. It is also shown that the equatorial β-plane approximation can allow an anomalous generation of Rossby waves at higher latitudes. Nonlinearities generally have a small effect on the solutions, within the confines of this model.     

岩石圈构造变形的物理模拟实验研究现状

在介绍物理模拟实验研究方法的基础上,系统概括了常规重力模拟实验的主要进展,研究内容以及模型相似性的研究现状。其研究进展 现在驱动自动化和观察,记录,测试系统数字化;模型结构多层化和实验材料多样化;模型相似半定量化。     

较大尺度下潮流物模试验理论可行性的数值研究

以渤海及其局部海域为例,通过数值模拟量化地转缺失对水动力过程的影响,评价不同空间尺度下实施潮流物理模型试验的理论可行性。结果表明,对整个渤海、辽东湾这么大尺度的海域实施物模试验理论上是不可行的;对90km尺度的渤海湾,地转缺失使模拟结果存在较大偏差;对莱州湾61km尺度的海域可进行物模试验。研究确定60km为实施潮流物模试验一般的理论允许尺度。     

舟山冬季暴雨的特征

文章分析了冬季暴雨发生时的环流形势和物理量场分布特征,揭示了冬季暴雨的发生与厄尔尼诺现象有着一定的相关。同时,分析了单站要素的变化,为以后的冬季暴雨预报提供参考。     

跨图幅要素物理无缝拼接关键技术研究及软件实现

以计算机技术代替手工劳动实现跨图幅要素物理无缝拼接的自动化为目标。通过分析图幅与要素之间的关系,将图幅编号与要素的相关属性结合,在此基础上,实现跨图幅要素的自动搜索,最终做到将跨图幅的要素自动拼接在一起。开发的软件,实现了跨图幅要素拼接的自动化目标,并用于生产。实践表明,该技术的研究和软件的实现能够成倍地提高生产效率、确保数据质量,具有实用价值。     

我国红黏土物理力学性能研究现状及展望

采用文献综述研究方法,梳理了红黏土研究成果并进行了评述,对红黏土的物理力学性质进行了归纳和总结,对红黏土的性能改良研究成果进行了汇总,指出红黏土的物理力学性能的差异性根源在于微观结构的个性差异存在,红黏土性能改良的困难在于红黏土的水敏性和热敏性,红黏土性能改良的关键在于控制其含水率。最后指出了研究不足在于普适性理论和知识体系没有构建,改良方法和技术探究应该加强,展望了红黏土性能改良的物理—化学—生物耦合作用的机理及复合技术开发和应用的研究。     

Modelling aspects of structures isolated with the frictional pendulum system

Different modelling aspects of structures isolated using the frictional pendulum system and subjected to earthquake ground motions are studied herein. Although the vertical dynamics of these structures is given special emphasis, other effects such as large isolator deformations and bidirectional input motion are also considered. Different structural models of the FPS are developed and tested for single-storey structures and a real four-storey building frame; among them, an ‘exact’ formulation of the FPS force–deformation constitutive relationship is presented. Results show that global building responses can be computed within 20 per cent error in the mean using a simplified model that ignores the vertical motion of the building; however, structural member deformations and forces need to be computed using a model that considers such motion. This is of particular importance when there exist correlation between the horizontal and vertical components of ground motion. Further, a physical model of the FPS is introduced and used to determine the response of a real four-storey frame, including uplift and downward impact. Results from this analysis show that local column responses may vary substantially depending on the stiffness of the isolation storey and the presence of a mass at the isolation level. Such mass is capable of filtering the large increase in column shear that results from the impact of the structure after uplift. Uplift occurs at several instants of the response of the structure considered, leading to an increase in column base shear as large as 3 times the shear obtained by ignoring the vertical dynamics of the building. © 1998 John Wiley & Sons, Ltd.     

Evaluation of clayed silt properties on the behavior of hydrate production in South China Sea

Gas hydrate is one kind of potential energy resources that is buried under deep seafloor or frozen areas. The first trial offshore production from the silty reservoir was conducted in the South China Sea by the China Geological Survey (CGS). During this test, there were many unique characteristics different from the sand reservoir, which was believed to be related to the clayed silt physical properties. In this paper, simulation experiments, facilities analysis, and theoretical calculation were used to confirm the hydrate structure, reservoir thermo-physical property, and bond water movement rule. And the behavior of how they affected production efficiency was analyzed. The results showed that: It was reasonable to use the structure I rather than structure II methane hydrate phase equilibrium data to make the production plan; the dissociation heat absorbed by hydrate was large enough to cause hydrate self-protection or reformation depend on the reservoir thermal transfer and gas supply; clayed silt got better thermal conductivity compared to coarse grain, but poor thermal convection especially with hydrate; clayed silt sediment was easy to bond water, but the irreducible water can be exchanged to free water under high production pressure, and the most obvious pressure range of water increment was 1.9–4.9 MPa.     

Downvalley fining of hillslope sediment in an alpine catchment: implications for downstream fining of sediment flux in mountain rivers

The size distributions of sediment delivered from hillslopes to rivers profoundly influence river morphodynamics, including river incision into bedrock and the quality of aquatic habitat. Yet little is known about the factors that influence size distributions of sediment produced by weathering on hillslopes. We present results of a field study of hillslope sediment size distributions at Inyo Creek, a steep catchment in granitic bedrock of the Sierra Nevada, USA. Particles sampled near the base of hillslopes, adjacent to the trunk stream, show a pronounced decrease in sediment size with decreasing sample elevation across all but the coarsest size classes. Measured size distributions become increasingly bimodal with decreasing elevation, exhibiting a coarse, bouldery mode that does not change with elevation and a more abundant finer mode that shifts from cobbles at the highest elevations to gravel at mid elevations and finally to sand at low elevations. We interpret these altitudinal variations in hillslope sediment size to reflect changes in physical, chemical, and biological weathering that can be explained by the catchment's strong altitudinal gradients in topography, climate, and vegetation cover. Because elevation and travel distance to the outlet are closely coupled, the altitudinal trends in sediment size produce a systematic decrease in sediment size along hillslopes parallel to the trunk stream. We refer to this phenomenon as ‘downvalley fining.’ Forward modeling shows that downvalley fining of hillslope sediment is necessary for downstream fining of the long-term average flux of coarse sediment in mountain landscapes where hillslopes and channels are coupled and long-term net sediment deposition is negligible. The model also shows that abrasion plays a secondary role in downstream fining of coarse sediment flux but plays a dominant role in partitioning between the bedload and suspended load. Patterns observed at Inyo Creek may be widespread in mountain ranges around the world. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.