豫西南矽线石物相分析方法研究

以豫西南地区4个矿区的矿物组合为依据,建立了铝量法测定矽线石含量的物相分析方法。对比了不同方法制备的矽线石及其不同存在条件下溶解率的差异,确定了接近矿区实际的、准确合理的分析结果校正办法。     

Applications of seismic moment tensor inversion in fast response to earthquakes

IntroductionAfteramoderateorstronger(Ms25.0)earthquake,themosturgentworkofthedivisionforearthquakemonitoringandpredictionistodetermineitstimeoforigin,hypocentrallocation(longitude,latitudeanddepth)andmagnitudeandtojudgethetrendofseismicregimedevelopmentassoonaspossible.Ingeneralcases,whenanearthquakewithMS25.0insideChinaoraonewithMS26.0inneighboringareasofChinahasoccurred,theEarthquakeBulletinofChineseSeismologicalNetworkcanprovidedeterminationoftheorigintime,hypocentrallocation(longitude,…     

重庆地区重复地震识别及在数字地震台网定位评价中的应用

利用重庆数字地震台网2010年1月至2017年12月的地震波形资料和观测报告,选出5个研究区1 251个M_L≥1.5地震进行波形互相关计算,识别出358对同时被2个地震台站记录且各台波形互相关系数(cc)不小于0.8的重复地震对,涉及342个地震事件,约占地震总数的27%。将筛选出的重复地震对用于定量判断地震目录中震相拾取误差及评估台网定位精度,结果显示:重庆数字地震台网的垂直定位误差约为3 km,水平定位误差约为5 km,Pg、Sg震相拾取误差分别为0.5 s和0.7 s;其中武隆区地震定位和震相拾取精度最高,綦江区最低。     

VLBI观测双线极化条纹拟合方法

提出了一种可用于下一代VLBI观测系统(VGOS)的双线极化条纹拟合方法。现有的VLBI观测模式采用的是右圆极化(RCP),而VGOS系统采用的是双线极化。本文方法包括校正和组合条纹拟合两部分。校正部分选择一颗强源作为参考源,分别得到不同极化方式下的通道时延及相位校正数据,用于目标源的校正。组合条纹拟合部分将4种极化分量的可见度数据组合成伪Stokes分量,通过搜索差分星位角使伪Stokes分量的幅值达到最大,从而获得最终的时延观测量。与单极化条纹拟合相比,组合极化获得的条纹具有更高的信噪比(SNR)及更小的条纹相位弥散度。     

Automatic Location of Swarm Earthquakes from Local Network Data

An advanced method of automated seismic phase picking and exact location and magnitude determination of swarm micro-earthquakes from local network data is presented. The phase picker is applied in two steps: first, S-wave groups are identified using a polarisation detector, and then corresponding P-wave groups are searched for. The times of maximum P- and S-amplitudes are then used as starting points for the determination of accurate P- and S-arrival times. The maximum S-wave amplitudes are utilised for determining local magnitudes. The whole procedure is checked by simultaneous preliminary hypocentre location providing estimates of local magnitudes and a compatibility check of the candidate P- and S-phases. The closest station to the earthquake cluster is used as a master, and the phase search at the remaining stations is governed by the P- and S-phases identified at the master station. Thanks to the use of apriori information on the approximate position of hypocentres, the procedure is also capable of picking the individual P- and S-phases of sequences of overlapping swarm events. The performance of the procedure was tested by comparison of the automatically and interactively created catalogues of the January 1997 NW-Bohemia micro-earthquake swarm. With stations located at epicentral distances between 0 and 20 km, the difference between hypocentre coordinates obtained by automatic and interactive processing did not exceed 80 m for 86% events. All events above magnitude 0.5 were identified, and the automatically determined polarity of first P-wave motion proved to be correct in 89% of them.     

Fractal Dimensions as Chaos Indicators

The correlation dimension D ₂ is used to develop a method of classification for phase space orbits. D ₂ depends only on the mutual distances of the orbits points, therefore the time development of the orbit is reflected in the time development of the correlation dimension approximants. It is shown, that this technique allows to investigate the dynamical properties of a phase space orbit, a classification of chaotic and regular orbits and a detection of sticky orbits.     

塔里木盆地北部隆起牙哈断裂带负反转过程与油气聚集

采用地层厚度分析、“零点”分析、位移 /距离曲线分析和断层生长指数分析等方法,讨论了牙哈负反转断裂带的几何学和运动学特征、主反转期及控油作用,结果表明牙哈主断裂主反转期为早白垩世,负反转活动结束于中新世康村期-上新世库车期。牙 1号断裂主反转期为中新世苏维依期,牙 2号断裂主反转期为晚白垩世-老第三纪,二者都于中新世康村期结束反转活动。牙哈断裂带油气聚集和分布与断裂的负反转活动有关。     

同向圆射流混合特性实验研究

利用声学多普勒流速仪(Acoustic Doppler Velocimetry,ADV)自动测速系统和平面激光诱导荧光(Plane Laser Induced Florescence,PLIF)系统对同向圆射流的速度场和浓度场进行了系统的研究,并与前人的工作进行了比较和讨论。时均特性测量结果表明,射流主体段下游各断面的速度和浓度横向分布是自相似的,且近似可用高斯分布来表示;随着射流向下游传播,射流中心流速逐渐衰减,在强射流区和弱射流区遵循不同的规律;紊动特性测量结果表明,下游各断面的紊动强度横向分布是自相似的。     

最小生成树相位解缠中冗余去除算法

目前，相位解缠的方法中以Goldstein提出的枝切法最为经典，它通过枝切线将残差点相互连接使得残差点电荷中和，在相位展开处理的积分中，积分路径不能穿过分支，从而限制误差的传播。但是由于枝切线连接策略的不合理，往往造成连成的枝切线过多、过长，甚至多条枝切线形成闭合区域，造成不能解缠的“死区”，特别是在残差点较多的情况，这种现象更为严重。本文在最小生成树原理的基础上，提出的枝切线冗余去除算法能简单、准确地去除枝切树中的冗余，并保证了相位解缠具有最好的效果。     

一种根据曲率变化检校畸变差的方法

提出了基于曲率变化的畸变差检校方法。首先对影像上提取的直线进行二分，根据重新匹配出的直线可确定实际物方直线在影像上的投影因镜头畸变而产生弯曲的程度，以此可对镜头的畸变进行检校。但对于镜头畸变较大的情况二分直线无法检测出实际曲线的弯曲程度，因此，需要对所有共线的直线进行分组，由每组直线来确定实际曲线的弯曲程度，检校镜头畸变，从而消除其对影像的影响。实验证明，通过这种方法对镜头畸变进行检校，能够得到较好的结果。