基于模糊集重心理论的岩体分类

将模糊综合评判方法应用于岩体分类可造成评判信息丢失,影响评判结果的准确性和可信度。针对该缺陷,引入模糊集重心理论,克服了综合评判方法中某些因素由于权值较小而被“淹没”的现象。在此基础上,选取了岩石质量指标、单轴抗压强度、岩体完整性系数、岩石软化系数、最大地震烈度和地下水渗水量这6个对岩体质量及其稳定性影响比较大的因素,以正态分布作为其隶属函数,采用加权平均值法确定各因素权重值,建立了基于模糊集重心理论的岩体模糊分类方法。结合具体的工程实例,阐明了上述各因素模糊集重心的计算方法。利用基于模糊集重心的岩体模糊分类方法,研究了某一地下工程围岩的稳定性级别,并与模糊综合评判方法计算的结果和围岩的实际稳定情况进行了对比,验证了方法的准确性和适用性。     

生态系统服务消耗：概念框架与中国西部案例

由于人为因素和自然因素的共同作用,全球生态系统正经历着巨大的变化。而这些驱动因素中,只有人为因素可进行调控。本文以人类对生态系统服务的消耗为着眼点,分析人类在获取舒适生活的过程中与生态系统形成的相互作用。研究从回顾生态系统服务消耗研究入手,建立了将生态系统服务、生态系统服务消耗和生态系统管理三者相联系的概念框架,并构建了生态系统服务消耗研究模型。同时,进一步以中国泾河流域为案例,对模型在生态系统服务直接消耗模式研究中的应用进行了实证研究和探讨。     

USE OF VALUE FUNCTIONS AS A POSSIBLE SUITABILITY SCALING PROCEDURE IN AUTOMATED COMPOSITE MAPPING

The application of composite suitability mapping integrated with a geographic information system is progressing at a much faster rate than the methodological improvements necessary for optimal use in the public planning context. The use of value functions is suggested as an alternative scaling procedure that is scientifically and operationally preferable to existing procedures. Value functions limit the operational subjectivity and enhance the potential for replication and verification of the analysis. Value functions are conducive to increased automation of the land planning and decision process while being comprehensible to non-expert decision-makers and the public.     

陕南秦巴山区植被生态功能的价值测评

根据秦巴山区20世纪末植被类型及覆盖度的分布,在GIS支持下测定秦巴山区植被生产和生态调节的物质量。利用生态经济学方法,测定各类植被生态功能的价值,建立秦巴山区植被生态数据库及植被生态账户。生态服务功能价值测评中,充分考虑了不同类型的覆盖度差异,并结合能量平衡、水量平衡和区域蒸散模式,测评结果表明：陕南秦巴山区植被生态系统有机质生产价值为199.6×108 元/a;植被保持土壤经济价值为22.64×108元/a;植被涵养水源的经济价值为22.66×108 元/a;植被固定CO2价值为352.24×108元/a;释放O₂价值为374.19×108 元/a;陕南秦巴山区植被有机物生产、保持土壤、涵养水源、固定CO₂和释放O₂ 5种生态服务功能价值共968.33×108 元/a。其中温带落叶阔叶林贡献率最高占29.35%,亚热带竹林、亚高山灌丛、草甸草原、山麓果树生态服务价值比重均在1%以下。     

The origin of the initial mass function and its dependence on the mean Jeans mass in molecular clouds

We investigate the dependence of stellar properties on the mean thermal Jeans mass in molecular clouds. We compare the results from the two largest hydrodynamical simulations of star formation to resolve the fragmentation process down to the opacity limit, the first of which was reported by Bate, Bonnell & Bromm. The initial conditions of the two calculations are identical except for the radii of the clouds, which are chosen so that the mean densities and mean thermal Jeans masses of the clouds differ by factors of 9 and 3, respectively.
We find that the denser cloud, with the lower mean thermal Jeans mass, produces a higher proportion of brown dwarfs and has a lower characteristic (median) mass of the stars and brown dwarfs. This dependence of the initial mass function (IMF) on the density of the cloud may explain the observation that the Taurus star-forming region appears to be deficient in brown dwarfs when compared with the Orion Trapezium cluster. The new calculation also produces wide binaries (separations >20 au), one of which is a wide binary brown dwarf system.
Based on the hydrodynamical calculations, we develop a simple accretion/ejection model for the origin of the IMF. In the model, all stars and brown dwarfs begin with the same mass (set by the opacity limit for fragmentation) and grow in mass until their accretion is terminated stochastically by their ejection from the cloud through dynamically interactions. The model predicts that the main variation of the IMF in different star-forming environments should be in the location of the peak (due to variations in the mean thermal Jeans mass of the cloud) and in the substellar regime. However, the slope of the IMF at high masses may depend on the dispersion in the accretion rates of protostars.     

渤海湾盆地北西盆山边界地区泊松比分布

泊松比做为了解地球内部介质一个非常重要的参数,在地震学上可以通过P波和S波速度的比值来确定.利用远震P波波形记录中包含的壳-幔速度间断面的Ps转换波及其多次反射/转换波信息,采用在地壳厚度－波速比平面上对接收函数转换波能量的叠加搜索方法,可以测定台站下方区域内地壳的平均厚度和泊松比.我们对渤海湾盆地北西盆山边界地区68个宽频带台站近两年的远震记录资料进行了处理研究,得到了该区域的地壳厚度以及泊松比分布.结果表明,渤海湾盆地北西盆山边界的泊松比值分布横向变化复杂, 山区侧与盆地侧存在明显差异;山区侧泊松比值分布相对均匀,盆地侧变化剧烈,但存在小区域范围内(100～200km)的一致性,与地表出露岩石的对比表明:形成渤海湾盆地的新生代伸展作用在下地壳深度有明显的响应,从地震学上获得的泊松比分布对于了解该地区地壳物质组成可起到很好的约束作用.     

Properties of iron at the Earth's core conditions

Summary. The phase diagram of iron up to 330 GPa is solved using the experimental data of static high pressure (up to 11 GPa) and the experimental data of shock wave data (up to 250 GPa). A solution for the highest triple point is found ( P = 280 GPa and T = 5760 K) by imposing the thermodynamic constraints of triple points. This pressure of the triple point is less than the pressure of the inner core–outer core boundary of the Earth. These results indicate that the density of iron at the inner core–outer core boundary pressure is close to 13 g cm⁻³, which lies close to the seismic solutions of the Earth at that pressure. It is thus concluded that the Earth's inner core is very likely to be virtually pure iron in its hexagonal close packed (hcp) phase.
It is shown that four properties of the Earth's inner core determined from seismology are close in value to the corresponding properties of hcp iron at inner core conditions: density, bulk modulus, longitudinal velocity, and Poisson's ratio. The density–pressure profile of hcp iron at inner core conditions matches the density–pressure profile of the inner core as determined by seismic methods, within the spread of values given by recent seismic models.
This indicates that the Earth is slowly cooling, the Earth's inner core is growing by crystallization, and the impurities of the core are concentrated in the outer core. The calculated temperature at the Earth's centre is 6450 K.     

基于DEM的交通线文化景观感知与功能分段研究——紫荆关长城景观的实证

在已有景观感知度概念和模型基础上,根据景观规模和特征将交通线某一具体位置的景观感知度划分为单点景观、多点景观和组景观感知度,并提出了基于集合表达的交通线景观感知度模型,以解决在一组特定的线性空间单元或区域上开展景观感知的研究和计算问题。以紫荆关长城文化景观为例,利用DEM进行景观视域分析,并引入资源价值、遗存现状等权重因子,实现了紫荆关附近公路和铁路线的景观感知度定量计算。根据景观感知度的空间格局,准确划分了敌台、烽火台和马面等单点景观、墙体景观及各类组景观和综合景观的最佳感知功能路段和最佳观赏位置。总体来看,紫荆关附近的公路线可感知位置连续性更强,铁路线高感知位置相对离散,公路感知效果整体优于铁路感知。交通线景观感知度模型特别适合用于大型造型地貌、宏伟建筑群等景观感知分析,是对旅游景观规划设计方法的一种扩充,能够将旅游景观规划设计从旅游地内部拓展到旅游地外围,对于提高旅游景观导引设计的精准性、提升旅游文化传播效率和增加传播途径等均有理论参考意义和实践应用价值。     

利用改进的粒子群算法反演视震源时间函数

视震源时间函数的提取是研究震源参数的重要途径. 本文提出了利用改进的粒子群(PSO)算法反演视震源时间函数的方法, 以水平线方法得到的结果作为PSO算法的初值, 并对PSO算法的惯性因子和学习因子进行改进, 提高计算效率. 采用改进的PSO算法对模拟数据进行了反演计算, 并与映射Landweber反褶积(PLD)方法和遗传算法(GA)进行了对比分析. 结果表明, 相对于PLD方法, 改进的PSO算法反演结果与真实结果误差更小; 相对于遗传算法, 改进的PSO算法计算效率提高了5倍以上. 最后, 利用改进的算法对2005年10月8日巴基斯坦克什米尔M_W7.6地震的P波视震源时间函数进行了提取, 结果表明此次地震P波视震源时间函数在25 s之内, 震源沿西北向破裂. 该结果与张勇等的结果一致.     

提取视震源时间函数的PLD方法及其对2005年克什米尔MW7.6地震的应用

通过重构用于确定视震源时间函数有效持续时间的判别函数,对提取视震源时间函数的PLD方法进行了改进;利用合成资料和实际资料,验证了改进后PLD方法的可行性和稳定性.将PLD方法应用于2005年克什米尔M_W7.6地震及其11个余震的1887条记录,在84个台站处获得了这次地震的视震源时间函数.分别平均从不同台站的P波、S波、Rayleigh波和 Love波中得到的视震源时间函数,获取了主震的平均视震源时间函数.对视震源时间函数的分析表明,2005年克什米尔M_W7.6地震的持续时间大约为25 s,这是一次“急始型”地震,总体上表现为圆盘形破裂.但有迹象表明,破裂在初期有向西北方向发展的单侧传播趋势.