不同参数化方案对风预报效果影响个例研究

中尺度气象模式对风场的预报效果与参数化方案的适应性紧密相关.以内蒙古高原丘陵地形、江苏平缓的海陆交界地形2种典型下垫面试验风电场为模拟区域,分别用WRFV3.2 （Weather Research and Forecast Model）模式自带的6种物理过程参数化组合方案预报了2010年1月和7月两个风电场区域的风速和风向,对比分析了参数化组合方案差异对风场预报的影响.结果表明：①内蒙古试验区,边界层MRF方案描述的边界层结构较MYJ方案合理;微物理方案WSM3在夏季的风速预报能力优于WSM6,而冬季相反;复杂地形区域的风场预报需考虑陆面过程参数化方案,尤其是夏季降水发生后,陆面过程对于边界层结构的影响增大,选用Noah优于无陆面过程.②江苏试验区,边界层MRF方案描述的边界层结构较MYJ方案合理;1月陆面过程RUC方案优于陆面热量扩散和Noah;7月陆面热量扩散方案优于RUC和Noah.③风向预报6个方案的预报风向统计与实际记录风向统计有较好的一致性,风向概率分布相似,盛行风向一致且稳定.     

Relationship between radar reflectivity and the time scale of warm rain formation in a global cloud-resolving model

The connections between radar reflectivity and the time scale of warm rain formation are examined within a global cloud-resolving model. The parameterizations formulae of auto-conversion and accretion processes in the model reveal specific relationships between the time scale for auto-conversion and radar reflectivity of cloud water as well as between the time scale for accretion and radar reflectivity of rain water. The overall time scale for warm rain formation, determined by combined contributions from these processes, is found to relate with total radar reflectivity in the manner that varies with cloud-rain composition between auto-conversion and accretion limits. The global statistics from the model output reveals that the time scale is closely related with the total radar reflectivity, thus suggesting that the radar reflectivity is a gross measure of the warm rain time scale. The relationship developed is applied to both model-simulated and CloudSat-observed radar reflectivities to compare the time scales of warm rain formation between observation and the model. Comparison of the time scale so derived reveals significant differences between the model and CloudSat observations. These differences suggest that the simulated cloud-rain composition in the model is biased toward larger rain water contents and smaller content of cloud water compared to reality due to an accelerated cloud-to-rain water conversion in the model.     

Wave-dependence of friction velocity,roughness length,and drag coefficient over coastal and open water surfaces by using three databases

The parameterization of friction velocity, roughness length, and the drag coefficient over coastal zones and open water surfaces enables us to better understand the physical processes of air-water interaction. In context of measurements from the Humidity Exchange over the Sea Main Experiment (HEXMAX), we recently proposed wave-parameter dependent approaches to sea surface friction velocity and the aerodynamic roughness by using the dimensional analysis method. To extend the application of these approaches to a range of natural surface conditions, the present study is to assess this approach by using both coastal shallow (RASEX) and open water surface measurements (Lake Ontario and Grand Banks ERS-1 SAR) where wind speeds were greater than 6.44 m s^-1. Friction velocities, the surface aerodynamic roughness, and the neutral drag coefficient estimated by these approaches under moderate wind conditions were compared with the measurements mentioned above. Results showed that the coefficients in these approaches for coastal shallow water surface differ from those for open water surfaces, and that the aerodynamic roughness length in terms of wave age or significant wave height should be treated differently for coastal shallow and open water surfaces.     

湍流通量参数化方案的非迭代方法研究

基于Högström (1996) 和Beljaars et al.(1991) 的研究工作, 沿用Louis et al.(1982) 和Launiainen (1995) 的思路, 本文采用多元回归分析方法, 研发了一种采用非迭代方法的湍流通量参数化方案。该方案直接用整体理查森数、 空气动力学粗糙度长度和热力学粗糙度长度对稳定度参数进行参数化, 从而避免了通过循环迭代计算Monin－Obukhov长度。该方案不仅有效地节省了CPU计算时间, 而且其计算结果与迭代方案 (BHH方案) 的计算结果非常接近。     

RegCM3模式对青藏高原温度和降水的模拟及检验

为了检验RegCM3区域气候模式对青藏高原地区的模拟能力,利用NCEP再分析资料和观测站点资料,采用三种不同的对流参数化方案,对青藏高原地区2006年夏季进行了模拟分析,并重点对温度和降水进行了细致的检验。结果表明：模式能较好地再现青藏高原地区大尺度的环流特征,具有对青藏高原地区的温度和降水分布特征的模拟能力;对于量值的模拟,三种对流参数化方案均模拟出了与实况温度一致的变化趋势,但均存在5~6 ℃的冷偏差;Grell方案模拟的降水量均大于实况,Kuo-Anthes方案对于高原地区的降水量的模拟较为接近于实况,但模式对降水量的模拟能力仍有待进一步提高。     

暴雨模拟中积云对流参数化方案的对比试验

利用WRF中尺度数值预报模式,选用七种微物理方案及网格嵌套技术分别与Kain-Fritsch(new Eta)、Betts-Miller-Janjic、Grell-Devenyi（简称KF、BMJ、GD方案）三种积云对流参数方案匹配,对2007年6月1—2日湖南南部的暴雨过程进行了模拟试验。模拟结果表明：选用Lin等微物理方案和三种积云方案,采用20 km的格点分辨率,基本上可以模拟这场暴雨的范围,且采用网格嵌套技术的模拟结果优于未采用嵌套的模拟结果;其中KF方案模拟的强降水位置、强度与实况比较接近;BMJ方案模拟的强降水范围偏大、强度偏强,位置偏南,上述两种方案都不同程度地存在着虚假的暴雨中心;GD方案模拟的强降水范围、强度均偏小。     

积云参数化和微物理方案不同组合应用对台风路径模拟效果的影响

利用美国国家环境预测中心(National Centers for Environmental Prediction,NCEP)和国家大气研究中心(NCAR)联合研发的天气研究和预报模式(Weather Research and Forecasting Model,WRF),研究了不同积云对流参数化方案和微物理过程方案对0514号台风"彩蝶"路径的影响.结果表明,积云对流参数化方案对台风路径影响较大,KF方案比BM方案能更好地模拟出台风路径;使用KF方案时,选择微物理方案比不选微物理方案对于台风路径有更好的模拟结果,其中,Ferrier、WSM6和Lin非常接近于实况;KF方案较好地模拟出副热带高压(简称副高)的西伸和东退的变化以及台风环流的风场分布和强度.     

背景场资料与参数化方案对暴雨预报的影响

利用GRAPES—meso模式和T213资料,对2007年7月18日发生在我国四川盆地和华东地区一次大暴雨过程进行多组数值试验,以分析侧边界资料、驱动资料的垂直分辨率、模式积分区域、云物理参数及边界参数对GRAPES—nleso模式降水预报影响。试验结果表明：（1）侧边界资料对模式降水预报结果影响较小,驱动GRAPES—meso的全球模式产品质量提高,降水预报结果越好;（2）驱动资料垂直分辨率的高低对降水预报结果影响较大,分辨率越高,预报能力越强,反之越弱;（3）模式积分区域对降水预报结果也有明显影响,区域越大,降水预报未必总是最好;（4）物理过程和边界参数试验表明,WSM6方案与KFeta方案组合的24小时降水预报与实况更接近。     

Influences of Two Convective Schemes on the Radiative Energy Budget in GAMIL1.0

The Grid-point Atmospheric Model of IAP LASG version 1.0 (GAMIL1.0) is used to investigate the impacts of different convective schemes on the radiative energy budget.The two convective schemes are Zhang and McFarlance (1995)/Hack (1994) (ZM) and Tiedtke (1989)/Nordeng (1994) (TN).Two simulations are performed:one with the ZM scheme (EX_ZM) and the other with the TN scheme (EX_TN).The results indicate that during the convective process,more water vapor consumption and temperature increment are found in the EX_ZM,especially in the lower model layer,its environment is therefore very dry.In contrast,there is a moister atmosphere in the EX_TN,which favors low cloud formation and large-scale condensation,and hence more low cloud fraction,higher cloud water mixing ratio,and deeper cloud extinction optical depth are simulated,reflecting more solar radiative flux in the EX_TN.This explains why the TN scheme underestimates the net shortwave radiative flux at the top of the atmosphere and at surface.In addition,convection influences longwave radiation,surface sensible and latent heat fluxes through changes in cloud emissivity and precipitation.     

Application of a semi-spectral cloud water parameterization to cooling tower plumes simulations

In order to simulate the plume produced by large natural draft cooling towers, a semi-spectral warm cloud parameterization has been implemented in an anelastic and non-hydrostatic 3D micro-scale meteorological code. The model results are compared to observations from a detailed field experiment carried out in 1980 at Bugey (location of an electrical nuclear power plant in the Rhône valley in East Central France) including airborne dynamical and microphysical measurements. Although we observe a slight overestimation of the liquid-water content, the results are satisfactory for all the 15 different cases simulated, which include different meteorological conditions ranging from low wind speed and convective conditions in clear sky to high wind and very cloudy. Such parameterization, which includes semi-spectral determination for droplet spectra, seems to be promising to describe plume interaction with atmosphere especially for aerosols and cloud droplets.