吐鲁番山区人工增水作业效果的统计分析

应用统计检验和回归分析两种数理统计方法，对吐鲁番1997－2000年山区人工增水作业效果进行了分析。结果得出作业影响区内作业年份5－6月平均流量显著增加。     

可控深度电法对水平柱体和垂直界面的计算和实验

球状地球体可控深度电法的效应系数可近似地全面表达可控深度电法和各种效应。通过点源二度体的电算模拟实验，证明了该方法在水平柱状体和地下存在电阻率垂直界面的条件下，也是有效的。     

GEOCHEMICAL EFFECTS OF MAJOR ELEMENTS DURING FLUID-ROCKS INTERACTION IN MARINWOBO FAULT IN THE SOUTH MARGIN AREAS OF ALTAI MOUNTAINS

There are four types of metamorphic rocks in the Marinwobo fault, i. e, cataclasite, mylonite,mictosite and migmatitic granite, and the formation of these rocks is due to the progressive metamorphism of the pyroclastics. The fluids play a very important role in the metamorphic process of these rocks in the Marinwobo fault, the most important feature is that the fluids not only result in the migration of the major elements of the deformation rocks, but also result in the volume loss of the deformation rocks in the deformation process. Thus the migration laws of the major elements in different stages of the progressive metamorphic process are discussed according to mass balance equations. Finally, the quantitative analysis of the mass loss and volume loss of the different rocks the in Marinwobo fault is discussed in this paper.     

Experimental Study on Mine Spoils During Superficial Geochemistry Processes

Based on the mineral and chemical compositions of spoils taken from the Shilu Cu-Mo deposit and Hetai gold deposit, the leaching and batch experiments were made on spoils taken from these two deposits using the leaching column designed by the authors. The experimental results showed that it is not always true that the mine drainage is acidic. Its acidity depends on acid-buffering capacity of gangue, host rock and its alteration mineral assemblage. The composition of the drainage water is related with the interaction between superficial or underground water and solid materials in the spoils, including minerals, hydroxides and amorphous substances. The leaching extent of the element is related with its occurrence form in the deposit. The preferential flow results in leaching-out of heavy metals in large amounts. So it is important to prevent the generating of preferential flow in the system. The results will provide very important grounds for the comprehensive management of land and ecological rehabilitation of the mine site.     

可调滞回模型的磁流变阻尼器及其试验

本文在现在磁流变阴尼器性能研究的基础上，提出了可调滞回模型的磁流变阻尼器及其试验方法，并进行理论、试验及算例分析。首先，根据恒定电流下磁流变阻尼器的阻尼力滞力特性，利用磁流变材料特性的电流（即磁场）可控特点，建立了变电流下的阻尼力滞回模型；其次，在中通过电路板控制外加电流与装置变形间的函数关系，实现了变电流调节的阻尼力滞回模型；最后，将磁流变阻尼器与橡胶隔震装置结合，形成智能磁流变隔夺装置，并对一个单自由度隔震结构进行了数值仿真分析。     

中原地区M≥6级地震后的减(增)震效应

通过对中原地区1500年－2000年所有19次M≥6级地震后空间图像的分析，初步认为M≥6级地震发生后平均63年内，在距原震中平均176km内无M≥5级地震发生，全部19次震例均呈现出内部减震效应，而在其外围出现地震增强的活动图像特征，增震效应对应率为72％。这种强震后的减（增）震效应，不仅对地震危险性分析，而且对1年尺度以上的地震趋势预测均有一定的意义。     

Principal axes of m-DOF structures PartⅠ:Static loading

This paper is the first in a two-part series that discusses the principal axes of M-DOF structures subjected to static and dynamic loads. The primary purpose of this series is to understand the magnitude of the dynamic response of structures to enable better design of structures and control modification devices/systems. Under idealized design conditions, the structural responses are obtained by using single direction input ground motions in the direction of the intended control devices/systems,and by assuming that the responses of the structure is decoupleable in three mutually perpendicular directions. This standard practice has been applied to both new and retrofitted structures using various seismic protective systems. Very limited information is available on the effects of neglecting the impact of directional couplings (cross effects - of which torsion is a component) of the dynamic response of structures. In order to quantify such effects, it is necessary to examine the principal axes of structures under both static and dynamic loading.This first paper deals with quantitative definitions of principal axes and "cross effects" of three-dimensional structures under static load by using linear algebra. It shows theoretically that, for three-dimensional structures, such principal axes rarely exist. Under static loading conditions, the cross effect is typically small and negligible from the viewpoint of engineering applications. However, it provides the theoretical base for subsequent quantification of the response couplings under dynamic loads, which is reported in part Ⅱ of this series.     

PRELIMINARY NUMERICAL STUDY OF TOPOGRAPHIC EFFECTS OF THE TIBETAN PLATEAU ON SURFACE DIRECT RADIATION*

To improve the simulating ability of a model,this paper presents a scheme of calculating direct radiation at land surface with topography in the model.A numerical study is conducted for the topographic effects of the Tibetan Plateau on the direct radiation using NCEP terrain data.Results show that,after taking account into the topographic radiation effect,the regional average of the radiation over the Plateau obviously increases in the local early morning and late afternoon,but changes less around noon.The effect is stronger in winter than that in summer.And heterogeneous topography has also affected the distribution of the radiation in this area.A simple numerical experiment shows that considering the effect will lead ground temperature to increase on the slope having more sunshine,and vice versa.     

Seismic evaluation of existing nuclear facility using ambient vibration test to characterize dynamic behavior of the structure and microtremor measurements to characterize the soil: a case study

The methods used for a building seismic hazard evaluation are presented with the associated results. The goals of the study are (1) to check the soil nature and the existence or not of a possible site effect around the installation and (2) to characterize the dynamic behavior of the building using ambient vibration records.

The results of the soil study with the Nakamura method are very difficult to interpret because they are not stable in space and time. The spectral ratios method has been used with regional earthquake records. The results of the application of this method allowed us to conclude that the installation was free of site effect.

The ambient vibration measurements on the building brought the conclusion to determine the first and second modes of the structure. These results have been used to calibrate numerical model. The modal shapes in plan (high roof) and in elevation (main column) have been evaluated. The damping of the building has been computed using ambient vibration records.     

Bedrock structure in Adapazari, Turkey—a possible cause of severe damage by the 1999 Kociaeli earthquake

The 1999 Kocaeli earthquake brought serious damage to downtown of Adapazari. To study why strong motions were generated at the town, a bedrock structure was investigated on the basis of Bouguer gravity anomaly, and SPAC and H/V analyses of microseisms. It was revealed that, the basin consists of three narrow depressions of bedrock with very steep edges, extending in E–W or NE–SW directions along the North Anatolia faults, and the depth to bedrock reaches 1000 m or more. Downtown of Adapazari is located 1–2 km apart from the basin-edge. It is considered that, the specific configuration of bedrock amplifies ground motions at the downtown area by focusing of seismic waves and/or interference between incident S-waves and surface-waves secondarily generated at the basin-edge. Studying 3D bedrock structure is an urgent issue for microzoning an urban area in a sedimentary basin.