Analysis of Karst Tufa from Guangxi, China

The paper presents an analysis of characteristic karst tufa from Guangxi, China, which has not been studied before. A comparison with tufa from Dinaric Karst of Croatia is discussed in view of the C-type climate. The major mineral is calcite. Minor minerals are quartz and dolomite, depending on location. The content of calcium carbonate varies from 65% to 92%, and that of magnesium carbonate from 0.03% to 1.77%. Among other elements, the most abundant are Fe, from 0.02% to 1.50%, and Ti, from 0.15% to 0.27%. Many other trace elements (V, Cr, Mn, Ni, Cu, Zn, As, Se, Br, Rb, Sr, Y, Zr, Hg and Pb) are also present. Specific activity of radionuclides 40K, 232Th, 137Cs, 226Ra and 238U varies from sample to sample. Concentration of U in tufa is close to that reported for sedimentary carbonate. Low concentration of 137Cs indicates that this part of the world was not exposed to nuclear explosions. The concentration of 226Ra is the highest in Mashan County. The ratio 238U/226Ra (0.21-0.71) in tufa from Mashan Co     

影响新生界"底含"发育的因素及含水层参数修正

分析了“底含”发育的主要影响因素，并以祁东煤矿为例，利用地下水动力学方法重新计算了“底含”的有关参数，对以往抽水试验参数进行修正，并成功地运用到邻近矿井。该研究表明，在富水性较强的古河道发育位置，要合理留设防水煤岩柱，才能保证煤矿安全生产。     

软土大变形固结计算中参数识别的遗传算法

含水量很高的饱和软土在外荷载作用下沉降很大,小变形分析误差太大,必须通过大变形非线性固结计算来模拟。遗传算法是一种全局优化和搜索的仿生算法。近年来随着工程领域中复杂的大规模非线性系统的出现,遗传算法日益得到青睐,目前已经广泛应用到各个领域中。本文对遗传算法做了改进,主要体现在杂交算子的选取和轮盘赌模型的模拟退火拉伸,并将其用于饱和软土的大变形固结分析,解决其中的关键参数识别问题。研究表明该方法是行之有效的,值得进一步研究探索。     

油气化探综合异常模糊划分动态聚类分级评价

通过选取描述油气化探综合异常的各种特征参量，借助模糊数学工具，利用最优聚类中心所具有的代表特征，建立分级指标，对油气化探综合进行分级评价。鄂尔多斯盆地油气化探综合异常的评价实例结果表明，利用油气化探综合异常各种特征参量进行动态聚类分级评价是可行的。     

实现数据库管理震源参数的探索

就如何利用数据库，结合Java、XML等手段对震源参数管理进行了一些探索，并给出了一些在一个实际系统中实现了的例子。     

Changes in source parameters of foreshocks and aftershocks of the 2001 M_S=6.0 Yajiang, Sichuan, earthquake

Introduction An MS=6.0 earthquake occurred on February 23, 2001 in Yajiang county, Sichuan Province. The earthquake is located on the east of the southeast segment of the Litang-Dewu fault with strike of NW. Before the event, on February 14, an MS=5.0 earthquake took place nearly in the same place. In 1948 an MS=7.3 earthquake occurred on the northwestern segment of the Litang fault. The length of the surface rupture belt caused by the earthquake is 70 km, which extended from Litang to…     

Limnology of four saline lakes in western Victoria, Australia: II. Biological parameters

Major biological parameters of four permanent (Lake Colac, Modewarre, Bolac and Tooliorook), shallow and slightly saline lakes in the volcanic plains of western Victoria, Australia recorded bi-monthly between November 1999–September 2001 are described. Chlorophyll a concentration ranged from 3–29 μg l⁻¹ with peaks in autumn. Phytoplankton taxa recorded were diverse, with Chlorophyta and Bacillariophyta being common. Cyanobacterial blooms were recorded mostly in summer. Zooplankton abundance in the lakes ranged from 12–368 individuals per litre. Rotifera dominated Lake Bolac, Copepoda dominated Lake Modewarre and they co-dominated Lake Colac and Tooliorook. Zooplankton interactions with phytoplankton suggest that simple predator-prey relationships cannot fully explain the trends exhibited and that a more complex model was acting to regulate algal biomass. A decline in the abundance of zooplankton in summer in Lake Modewarre was attributed to predation by high number of exotic larval carp at that time of the year. A total of 25 benthic macroinvertebrate taxa were recorded from Lake Colac, 30 from Modewarre, 22 from Bolac and 35 from Tooliorook. Twenty-one of the 45 taxa identified occurred in at least three lakes. Nine of the 12 taxa that occurred in only one lake were from Lake Tooliorook. Simpson's diversity index was low in Lake Bolac when compared to other three lakes. Lake Modewarre had more benthic individuals (3246 Ind m⁻²) than other three lakes (range 624–1397 Ind m⁻²). The combined contribution of Ostracoda, Amphipoda and Gastropoda dominated the benthos in all the lakes throughout the study period. Macroinvertebrate taxa richness was higher in the present study lakes than recorded from the lakes in the region. Frequency of sampling and number of sampling sites seemed more important in determining species richness than the size and shallowness of the lakes.     

Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.     

压裂井经济分析的优化方法

水力压裂是油气井增产的一项重要技术措施。压裂效果的经济评价，实际上是一个压裂设计的优化过程。研究经济问题即为研究压裂优化问题。提出了压裂井的施工费用计算方法和贴现率、净收入、净现值的计算公式，并对压裂井进行了经济分析，给出了压裂设计优化的步骤。建立了八屋—后五家户气田压裂经济评价模型，并应用到实际施工现场。使油气单井产量比过去增加2～3倍。     

冲绳海槽南部沉积层序的粒度特征

对取自冲绳海槽南部的A2 3孔经前处理后的沉积物样品进行了粒度测试,探讨了陆源沉积层序的粒度特征。沉积物平均粒径、分选系数、偏态、峰态等粒度参数的变化显示出A2 3孔的沉积层序以 4 0 0cm为界可分为上、下两段,下段各参数稳定,代表了比较稳定的水动力条件的沉积环境;上段则波动较大,小规模浊流沉积频繁发育,暗示了不稳定的沉积环境。浊流层内粗粒与细粒组分含量及粒度分布的变化具有明显的规律性。通过分析A2 3孔陆源沉积层序的各沉积参数特征,认为冲绳海槽南部的沉积环境和动力在时间尺度上有较大的变化,东海陆架物质向南部海槽的输运可能是以峡谷为通道的重力作用引起的床底沉积作用为主。另外,对陆源碎屑和全样粒度结果的对比,显示了前处理方法对于海洋沉积物粒度分析的重要性.