西藏札达盆地控盆断裂有限元数值模拟

札达盆地是喜马拉雅构造带中的一个山间断陷盆地,其演化过程与盆地两侧的控盆构造密切相关。对控盆断裂的构造应力场进行模拟计算,将有助于进一步深化对本区构造控盆的认识。因此,在对盆地构造地质进行详细调查的基础上,结合本区的深部地质与地球物理资料,对札达盆地控盆断裂的构造应力场进行了模拟。计算结果表明,札达盆地的演化明显受盆地两侧边界断裂的控制,札达盆地是在整体南北向挤压应力的作用下,不同块体差异隆升作用的结果。其南侧的控盆断裂为北倾的正断层,北侧的控盆断裂为南倾的逆断层,二者共同形成了南降北升的翘板式断陷盆地运动过程,是喜马拉雅地块在陆内汇聚挤压构造环境中构造应力场调整的一种方式。     

人工边坡潜在滑动面研究——以广州科学城某人工高边坡为例

运用强度参数的改变对边坡破坏面形迹影响不明显这一特点,在数值模拟过程中通过改变岩体强度参数,有效地获取潜在滑动面的位置和形态,较好地解决了滑动面搜索的难题。将该法应用于广州科学城某人工高边坡稳定性的研究,在三维数值模拟过程中,将强度参数大幅度折减,计算后获得各剖面的剪应变增量图,从这些图中可获得潜在滑动面。这与人们通常将此类边坡的中风化面作为滑动面存在较大差别。将该滑动面运用极限平衡法进行计算,计算结果显示各剖面的安全系数基本都大于1.2,边坡稳定但仍需要加固处理,与三维数值模拟结果相一致。由此认为用这种分析法确定出的潜在滑动面合理、计算结果可靠,可作为搜索边坡潜在滑动面并计算安全系数的方法之一。     

Issues concerning global warming today

The global weather of today is growing significantly warmer; this is an indisputable fact. However, the scientific community has not yet reached consensus on the causes of global warming and its possible consequences. This paper introduces the causes of global warming and summarizes its results, which both involve a series of huge and complex system issues. Our top priority is to pinpoint the main reason and the interrelated links between causative factors by adopting a macro-approach, or comprehensive comparison analysis. Its physical mechanism was then determined and its digital model established after quantitative study. __________ Translated from Green Leaf, 2007, (8): 34–35 [译自: 绿叶]     

有限元法模拟开挖引起的基坑水平位移和邻近建筑物沉降

以徐州某采用水泥土墙支护的基坑为例,采用有限元数值模拟的方法,对基坑开挖引起的水平位移量和邻近建筑物沉降量进行了计算,并与实际监测值进行了对比分析,得到了一些关于如何控制基坑水平位移和减少基坑周边建筑沉降的结论。     

数值模拟技术在海坨子油田开发调整研究中的应用

讨论分析数值模拟技术在海坨子油田开发调整研究中的思路和方法,采用美国Landmark公司VIP2003．4版本数值模拟软件包进行模拟研究,通过参数准备,静、动态拟合,模拟出海坨子油田海S9—11井组1—9砂组各小层剩余储量大小及不同阶段流体饱和度分布,结合可视化技术形象描述了海坨子油田剩余油变化规律及潜力区,在此基础上预测不同井网加密方式开发指标,并优选出最佳方案,为海坨子油田下步开发调整提供了重要依据,取得了较好的效果。     

地震学定量预报指标的一种提取方法——对比筛选法

鉴于目前地震学综合定量预报指标的缺乏和预报工作的急需,尝试使用“对比筛选法(简称CSM方法)”进行地震学定量预报指标的提取试验。较之以往作法的进展在于:1.同时使用“有震”和“无震”两类样本对比筛选;2.对不同地区的地震学参数进行了归一化处理。这样做的显著优点是:1.可以较有效地提取“有震异常”和“正常变化”指标;2.提取的异常和预报指标具有定量化和普适性特点。 试验研究使用大华北地震区资料,研究对象取中强地震。经内符和外推检验,证明该方法提取的异常和预报指标有效性和实用性较高。     

地震综合效应场函数及其在地震预报中的应用──（一）地震综合效应场函数及其计算方法

在系统地分析了目前各种测震学地震预报方法科学思路的基础上,认为测震学地震预报方法基本上可以分为两大类。一类是以已经发生的一些地震作为未来可能发生的地震的“因”,即由于已经发生的地震对区域应力场的影响,导致未来发生较强地震。这一类包括的预报方法较多,如空区、条带、ｂ值、地震迁移、相关地震等等及其由此衍生出来的各种方法。另一类是把已经发生的一些地震作为区域应力场增强的“果”,即已经发生的地震是区域应力场增强过程中的一种反映,而未来地震不一定是已经发生的地震所导致的结果。这一类包括“地震窗口”、小震群活动等方法。针对第一类方法,各种预报方法都是力图从地震三要素中提取未来地震的信息,而具体作法又都是利用地震三要素这个多维空间的某个剖面。为了从地震活动诸要素的多维空间提取综合信息,我们对每个地震加入了破裂面方位,构成了地震第四要素,并依据地震４要素建立了地震综合效应场函数。地震综合效应场函数概括了多种测震学地震预报方法的科学思路和预报经验,从而可以形成测震学的综合预报方法。     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

Blind prediction of the site effects at Ashigara Valley,Japan, and its comparison with reality

Weak and strong ground motions were numerically predicted for three stations of the Ashigara Valley test site. The prediction was based on the records from a rock-outcrop station, one weak-motion record from a surface-sediments station, and the standard geotechnical model. The data were provided by the Japanese Working Group on the Effects of Surface Geology as a part of an international experiment. The finite-difference method for SH waves in a 2-D linear viscoelastic medium (a causalQ model) was employed.Comparison with the real records shows that at two stations the predictions fit better than at the third one. Strangely, the two better predictions were for stations situated at larger distances from the reference rock station (one station was on the surface, the other in a borehole). The strong ground motion (the peak acceleration of about 200 cm s^–2) was not predicted qualitatively worse than the weak motion (8 cm s^–2). A less sophisticated second prediction (not submitted during the experiment), in which we did not attempt to fit the available weak-motion record at the sedimentary station, agrees with the reality significantly better.     

Prediction of the occurrence of Related Strong Earthquakes in Italy

In the seismic flow it is often observed that a Strong Earthquake (SE), is followed by Related Strong Earthquakes (RSEs), which occur near the epicenter of the SE with origin time rather close to the origin time of the SE. The algorithm for the prediction of the occurrence of a RSE has been developed and applied for the first time to the seismicity data of the California-Nevada region and has been successfully tested in several regions of the world, the statistical significance of the result being 97%. To date it has been possible to make five successful forward predictions, with no false alarms or failures to predict.The algorithm is applied here to the Italian territory, where the occurrence of RSEs is a particularly rare phenomenon. Our results show that the standard algorithm is successfully directly applicable without adjustment of the parameters. Eleven SEs are considered. Of them, three are followed by a RSE, as predicted by the algorithm, eight SEs are not followed by a RSE, and the algorithm predicts this behaviour for seven of them, giving rise to only one false alarm. Since, in Italy, often the series of strong earthquakes is relatively short, the algorithm has been extended to handle such a situation. The result of this experiment indicates that it is possible to attempt to test a SE, for the occurrence of a RSE, soon after the occurrence of the SE itself, performing timely preliminary recognition on reduced data sets. This fact, the high confidence level of the retrospective analysis, and the first successful forward predictions, made in different parts of the World, indicates that, even if additional tests are desirable, the algorithm can already be considered for routine application to Civil Defence.