Development of site-specific design ground motions in Western and Eastern North America

This paper presents results recently obtained for generating site-specific ground motions needed for design of critical facilities. The general approach followed in developing these ground motions using either deterministic or probabilistic criteria is specification of motions for rock outcrop or very firm soil conditions followed by adjustments for site-specific conditions. Central issues in this process include development of appropriate attenuation relations and their uncertainties, differences in expected motions between Western and Eastern North America, and incorporation of site-specific adjustments that maintain the same hazard level as the control motions, while incorporating uncertainties in local dynamic material properties. For tectonically active regions, such as the Western United States (WUS), sufficient strong motion data exist to constrain empirical attenuation relations for M up to about 7 and for distances greater than about 10–15 km. Motions for larger magnitudes and closer distances are largely driven by extrapolations of empirical relations and uncertainties need to be substantially increased for these cases.

For the Eastern United States (CEUS), due to the paucity of strong motion data for cratonic regions worldwide, estimation of strong ground motions for engineering design is based entirely on calibrated models. The models are usually calibrated and validated in the WUS where sufficient strong motion data are available and then recalibrated for applications to the CEUS. Recalibration generally entails revising parameters based on available CEUS ground motion data as well as indirect inferences through intensity observations. Known differences in model parameters such as crustal structure between WUS and CEUS are generally accommodated as well. These procedures are examined and discussed.     

拱坝非线性地震反应分析

本文根据一致粘弹性模型的概念，引入应变率的影响，将混凝土静态William-Warnke三参数模型改造成一致粘塑性William-Warnke三参数本构模型，并用这个模型对某高拱坝进行了非线性地震响应分析，与线弹性模型和应变率无关的William-Warnke三参数模型的结果进行了比较，初步探讨了应变率对拱坝地震反应的影响。     

挡块对斜拉桥抗震性能的影响

本文基于现有永和斜拉桥挡块设施的严重破损，引入非线性挡块元，采用有限元计算分析挡块对斜拉桥抗震性能的影响。结果表明，斜拉桥塔根挡块的调协对减震效果影响不大，但挡块具有减小塔顶残余变形的有利作用。鉴于此，对永和斜拉桥挡块进行修复是必要的。     

粘性泥石流残留层的形成及减阻作用--以云南蒋家沟泥石流为例

通过对云南蒋家沟粘性泥石流的野外观测 ,讨论了粘性泥石流残留层的定义特征 ,在大量实测数据基础上 ,分析了残留层易形成时段的特性 ;分别对一次泥石流过程、若干阵泥石流和一阵泥石流残留层的变化进行了相关分析 ;最后用观测数据分析了泥石流残留层的减阻作用     

求解变分不等式的Newton迭代的半局部收敛性分析

分析了求解变分不等式Newton方法的半局部收敛性，建立了类似于Kantorovich定理的收敛性结果。该结果不仅为判断Newton方法的收敛性提供了可计算的充分条件，也给出了Newton方法的收敛域以及问题解的存在区域。同时，文章也得到了Newton方法的若干收敛性质，包含收敛阶以及可计算的误差估计式等。     

贾汪煤田为何未能向北东继续延伸

贾汪煤田的基本构造形态为贾汪向斜。通过对贾汪向斜北东延长段原地系统和外来系统的分析研究，认为在贾汪石炭——二叠纪煤田北界伏山前断裂的北东盘上，受构造应力的影响，奥陶系沿着其与寒武系界面间的软弱层被推覆，在原地代之以大面积分布的是青白口——震旦系及部分寒武系而非石炭——二叠系，从而造成了贾汪煤田没有向北东继续延伸。     

辽宁地区的幔枝构造

将辽宁地区划分为4个幔枝构造:山海关幔枝、辽东南幔枝、建平-阜新幔枝、西丰幔枝,文章分述了它们各自组成与构造特点,并举例说明了辽宁幔枝构造通过其三个次级构造单元对成矿的控制规律.     

Z油田低阻油层影响因素分析

通过对Y油田和Z油田电阻率影响因素对电阻率的影响对比，分析了Z油田低阻的原因及各影响因素影响程度。     

论上海软土地基⑦⑧⑨层压缩模量Es的定值问题

上海地区深部土层⑦⑧⑨层埋深在30～70m。对其压缩模量Es的定值问题,现行《上海市地基基础设计规范》(DGJ08 11 1999)(后文中简称《规范》)长期以来确定室内试验E0 1～0 2值为沉降计算值,导致沉降计算值与建(构)筑物实际沉降量之间相差2～8倍。为符合规范的变形要求,设计人员不得不采取桩加粗、加长、加密的办法,从而造成桩基投资的极大浪费。为了正确认识深部土层的Es值,上海岩土工程界进行了多种形式的试验研究。近年来,笔者结合上海高、大、深、重建(构)筑物的工程实践,深入进行上海深部⑦⑧⑨层压缩模量Es的试验研究,获得许多新的认识,对其定值问题作了研究,提出⑦⑧⑨层的建议值,供同行参考研讨。