Component correlations in structure‐specific seismic loss estimation

This paper addresses correlations between multiple components in structure‐specific seismic loss estimation. To date, the consideration of such correlations has been limited by methodological tractability, increased computational demand, and a paucity of data for their computation. The effect of component correlations, which arises in various forms, is however a significant factor affecting the results of structure‐specific seismic loss estimation and therefore it is prudent that adequate consideration be given to their effect. This paper provides the details of a tractable and computationally efficient seismic loss estimation methodology in which correlations can be considered. Methods to determine the necessary correlations are discussed, particularly those that can be used in the absence of sufficient empirical data, for which values are suggested based on the judgement. The effects of various assumptions regarding correlations are illustrated via application to a case‐study office structure. It is observed that certain correlation assumptions can lead to errors in excess of 50% in the lognormal standard deviation in the loss given intensity and loss hazard relationships, while full consideration of partial correlations is 50 times more computationally expensive than other assumptions. Copyright © 2009 John Wiley & Sons, Ltd.     

Comparison of LiDAR waveform processing methods for very shallow water bathymetry using Raman,near‐infrared and green signals

Airborne light detection and ranging (LiDAR) bathymetry appears to be a useful technology for bed topography mapping of non‐navigable areas, offering high data density and a high acquisition rate. However, few studies have focused on continental waters, in particular, on very shallow waters (<2 m) where it is difficult to extract the surface and bottom positions that are typically mixed in the green LiDAR signal. This paper proposes two new processing methods for depth extraction based on the use of different LiDAR signals [green, near‐infrared (NIR), Raman] of the SHOALS‐1000T sensor. They have been tested on a very shallow coastal area (Golfe du Morbihan, France) as an analogy to very shallow rivers. The first method is based on a combination of mathematical and heuristic methods using the green and the NIR LiDAR signals to cross validate the information delivered by each signal. The second method extracts water depths from the Raman signal using statistical methods such as principal components analysis (PCA) and classification and regression tree (CART) analysis. The obtained results are then compared to the reference depths, and the performances of the different methods, as well as their advantages/disadvantages are evaluated. The green/NIR method supplies 42% more points compared to the operator process, with an equivalent mean error (?4·2 cm verusu ?4·5 cm) and a smaller standard deviation (25·3 cm verusu 33·5 cm). The Raman processing method provides very scattered results (standard deviation of 40·3 cm) with the lowest mean error (?3·1 cm) and 40% more points. The minimum detectable depth is also improved by the two presented methods, being around 1 m for the green/NIR approach and 0·5 m for the statistical approach, compared to 1·5 m for the data processed by the operator. Despite its ability to measure other parameters like water temperature, the Raman method needed a large amount of reference data to provide reliable depth measurements, as opposed to the green/NIR method. Copyright © 2010 John Wiley & Sons, Ltd.     

����ƹ�ģ�ͷ���������Ƶ�һ���·���

????????????????????????????????????????Helmert???????????????????????????????????в???????????????????????????????????????????????????????÷????????????????????????????????????????????????????????     

���򹤳���Բ����������ϼ���

????????????????????????????????????????????????????????ι??????????????????????????????????????????????????????????????????????λ???????????????????????????????????????????????????????ù???????????÷???????????     

虾类微量元素含量的主成分分析

应用主成分分析法对湛江几种养殖对虾和海捕天然对虾的微量元素的含量进行综合评价。结果表明:虾体中微量元素含量均衡;综合排名依次为野生斑节对虾、野生凡纳滨对虾、养殖斑节对虾、养殖凡纳滨对虾,两种野生对虾的综合排名均高于养殖对虾;野生斑节对虾综合得分为1.6708,微量元素含量最均衡,营养价值最高,养殖凡纳滨对虾营养价值最低,综合得分为-1.20943。     

求解大样本核主成分分析模型的Lanczos算法

求解核主成分分析模型的技术关键是确定核矩阵端部的较大特征对。把求解大规模对称矩阵端部特征对问题的基本方法--Lanczos算法应用于核主成分分析模型的求解,设计了大样本核主成分分析模型求解的实用算法。在clapack和nu TRLan两个软件包的基础上,开发了大样本核主成分分析模型求解算法的VC++程序。用高光谱遥感图像数据进行模型求解算法的应用试验研究,证明了大样本核主成分分析模型求解算法的实用性。     

主成分分析和熵值法相结合的水质综合评价模型及其在郑州市金水河的应用

水质评价对决策者决定水的使用功效尤为重要。水质综合评价系统中涉及到大量因子与指标,因子之间相互作用,致使水质的评价工作相对困难。主成分分析法可以消除因子间的相关性,因而被广泛应用于水质评价,但其忽略了数据离散程度的问题。熵值法则考虑了数据的离散特点。为更好地进行水质的综合评价,本文提出把主成分分析法和熵值法结合起来确定指标权重的方法,建立了水质评价模型,并采用该模型对郑州市金水河再生水2009年的水质情况进行评价,将评价结果与单独采用主成分分析或熵值法的结果进行了比较。结果表明了该方法的可行性与实用性,能够为非常规水资源利用提供理论依据和决策参考。     

真三轴条件下Q2黄土的破坏模式与强度特性研究

基于西安理工大学自主研发的新型真三轴试验仪,对不同含水率Q2黄土在不同b值、不同固结围压条件下进行了真三轴试验研究,分析了真三轴试样破坏方式、中主应力对抗剪强度参数的影响以及π平面上的强度破坏面。结果表明,Q2黄土真三轴试样破坏方式主要有侧胀破坏、锥形破坏、梯形破坏、六边形破坏;不同b值应力路经条件下黏聚力与三轴压缩条件下黏聚力的比值在0.9～1.9之间,内摩擦角比值在0.7～1.5之间。土的结构性和土体破坏方式对π平面上的强度破坏面的形状影响较大,固结围压对π平面上的强度破坏面的大小影响较大;原状Q2黄土在π平面上的强度破坏面形状主要呈现梨形和轴对称六边形;随着结构性由强到弱,π平面上的强度破坏面形状由梨形向轴对称六边形变化。     

综合国力主成分分析与模糊综合组合评价模型

基于模糊理论、统计分析等数学理论,提出一种定量的综合国力模糊综合评价模型.首先对基本数据进行标准化处理和主成分分析,并建立综合国力评判集;其次,根据所选取的主成分及其贡献值建立评判对象因素集,并计算综合国力评判因素权向量;最后,利用综合国力评判集、评判因素权向量及评判对象因素集进行模糊综合评判,根据模糊综合评判模型对13个主要国家的综合国力进行了比较分析.     

海啸波近岸共振响应的数值模拟及分析

应用有限差分方法求解非线性浅水长波方程,建立了海啸波产生和传播的二维数值模型;对太平洋地震引起的夏威夷群岛海啸波进行模拟,并将模拟结果和测站实测值进行比较,验证了模型的正确性。利用快速傅里叶变换对数值模拟结果进行谱分析,得到整个计算区域的能量谱分布,并给出了发生能量聚集的位置及相应的谱峰周期。讨论了海啸波传播到近岸时可能产生的共振响应现象,发现海啸波和近岸的共振响应不仅与近岸复杂地形有关,还与海啸波传播到近岸时的波浪入射方向有关。