A three‐component end‐member analysis of streamwater hydrochemistry in a small Japanese forested headwater catchment

Intensive water sampling in conjunction with hydrological observations was conducted during three different rainstorms in order to understand the effects of rainfall events on the temporal variation of streamwater chemistry in a small headwater forest catchment. Concentrations of Na⁺ and SO₄^2? decreased as the discharge rate increased. Hydrograph separation of the components was made using the three‐component model based on the end‐members mixing analysis (EMMA). The three end‐members were:

• 1 the groundwater in the saturated zone that prescribes the chemistry of the baseflow;
• 2 the throughfall that dilutes the streamwater;
• 3 the groundwater in the transient saturated zone prescribed, which was dependent on the groundwater level.

When the groundwater level was lower, only the two components, groundwater in the saturated zone and throughfall, affected the streamwater chemistry. When the groundwater level rose and the saturated zone spread, the groundwater in the transient saturated zone became the third component. When the groundwater in the transient saturated zone contributed to the discharge, this component became the dominant source and the streamwater chemistry was affected by the groundwater chemistry in the transient saturated zone. When this component was discharged as the saturation overland flow, the streamwater chemistry was greatly affected by this component. Copyright © 2001 John Wiley & Sons, Ltd.     

填充墙与钢框架协同工作性能非线性分析

在试验研究的基础上，运用ANSYS有限元中的接触单元建模，对加气混凝土填充墙钢框架的结构性能进行了研究，同时与纯钢框架结构在强度、刚度、以及延性等方面进行了对比分析，结果表明：填充墙与钢框架协同工作能够改善钢框架结构的受力性能和抗震能力，这为钢结构及其围护体系的研究与推广应用提供了一定的理论依据。     

打滑地层新型孕镶金刚石钻头

在分析打滑地层特点的基础上,指出了钻进该地层所存在的问题,提出了用于打滑地层钻进的新型孕镶金刚石钻头的设计思路,在钻头工作层中采用主、辅两种磨料,并对这两种磨料的工作机理、处理工艺以及该新型钻头的制造进行了阐述.钻头的室内钻进试验结果表明:在钻进极坚硬致密的锆刚玉时,相对于普通金刚石钻头,新型孕镶金刚石钻头的钻进时效提高1.93倍,平均磨损量增加38%,具有高时效、相对寿命长的优点,是打滑地层钻进的理想钻头.     

南方海相地震资料脊波非线性阈值去噪方法

小波分析方法在数据处理中已得到成功广泛的应用,这主要得益于它的局部时频分析能力,但是小波分析对方向的表征能力有限。脊波变换具备优越的方向选择性能,能更好地处理含有线状变化特征的信号。本文针对低信噪比地震记录,尝试研究利用脊波变换方法对其进行处理,提高剖面资料信噪比,突出同相轴信息。在对南方某油田的实际地震资料的处理中,可以发现处理后的地震剖面同相轴品质及连续性有了明显改善,信噪比增强,分辨率相应提高,体现出了该方法相对常规小波分析方法的优越性。     

Identification of modal parameters of non‐classically damped linear structures under multi‐component earthquake loading

A method for parametric system identification of classically damped linear system in frequency domain is adopted and extended for non‐classically damped linear systems subjected up to six components of earthquake ground motions. This method is able to work in multi‐input/multi‐output (MIMO) case. The response of a two‐degree‐of‐freedom model with non‐classical damping, excited by one‐component earthquake ground motion, is simulated and used to verify the proposed system identification method in the single‐input/multi‐output case. Also, the records of a 10 storey real building during the Northridge earthquake is used to verify the proposed system identification method in the MIMO case. In this case, at first, a single‐input/multi‐output assumption is considered for the system and modal parameters are identified, then other components of earthquake ground motions are added, respectively, and the modal parameters are identified again. This procedure is repeated until all four components of earthquake ground motions which are measured at the base level of the building are included in the identification process. The results of identification of real building show that consideration of non‐classical damping and inclusion of the multi‐components effect of earthquake ground motions can improve the least‐squares match between the finite Fourier transforms of recorded and calculated acceleration responses. Copyright © 2006 John Wiley & Sons, Ltd.     

GIS中地籍宗地面积的方差分量估计

探讨在地籍宗地数字化的面积处理问题中,把已知面积数据和数字化坐标同时作为观测值的面积处理方法.采用方差分量估计,解决已知面积数据参与平差时的权的确定.通过实例分析,认为采用条件平差方差分量估计方法来对宗地面积处理,能够更加合理地调整已有面积与由数字化坐标得到的面积值之间的差异.     

Helmert方差分量估计的粗差检验与抗差解

当观测值中含有粗差时，检验表明Helmert方差分量估计结果同样含有粗差，且粗差还可能会发生转移，为有效地抵制粗差和随机模型差的互相影响，指出了发生这一转移的原因，介绍了基于双因子等价权的抗差估计，并针对相关Helmert方差分量估计抗差解求解过程中容易出现的法矩阵0值溢出问题，提出了改进方法。     

ASP应用中COM组件开发方法研究

从ASP技术与COM技术出发，针对MCU远程控制应用的多层分布体系结构特点及应用要求，详细论述了如何进行组件线程类型选择、接口设计、物理定位开发与实现具有特定功能的COM组件并如何在ASP应用中创建和扫行，以实现远程控制MCU功能。论述了在设计与实现COM组件过程中，其安全性与作用域的选择。     

遗传算法在水环境灰色非线性规划中的应用

利用常规最优化方法解水环境中的灰色非线性规划问题难度较大。尝试利用遗传算法与传统非线性规划解法相结合的混合数值算法对此类问题的求解进行了探索。在实例的应用中,该方法有效性得到了验证。     

长江口九段沙下段冲淤演变水动力机制分析

概述了长江口深水航道整治一期工程及工程对九段沙下段地形冲淤的影响.根据已建立的σ坐标系下三维非线性水流数学模型,用新测水文资料对模型进行验证.利用所建立的模型,结合由现场测量得到一期工程前后九段沙下段近期地形演变,数值模拟了北槽区域流通量、底层欧拉余流和北槽中下段平面水流特征,以综合分析北槽水域水动力变化对九段沙下段地形冲淤变化的影响.