Ice Sheet-Thermohaline Circulation Interactions in a Climate Model of Intermediate Complexity

A vertically integrated dynamic ice sheet model is coupled to the atmosphere-ocean-sea ice-land surface climate model recently developed by Wang and Mysak (2000). The background lateral (east-west) ice sheet discharge rate used by Gallee et al. (1992) is reduced and the planetary emissivity is increased (to parameterize the cooling effect of a decrease of the atmospheric CO₂ concentration), in order to build up substantial ice sheets during a glacial period and hence set the stage for ice sheet-thermohaline circulation (THC) interactions. The following iceberg calving scheme is then introduced: when the maximum model height of the North American ice sheet reaches a critical value (2400 m), a prescribed lateral discharged rate is imposed on top of the background discharge rate for a finite time. Per a small prescribed discharge rate, repeated small iceberg calving events occur, which lead to millennial-scale climate cycles with small amplitudes. These are a crude representation of Dansgaard-Oeschger oscillations. Over one such cycle, the zonally averaged January surface air temperature (SAT) drops about 1.5°C at 72.5°N. However, a large prescribed lateral discharge rate leads to the shut down of the THC. In this case, the January SAT drops about 5°C at 72.5°N, the sea ice extent advances equatorward from 57.5° to 47.5°N and the net ice accumulation rate at the grid of maximum ice sheet height is reduced from 0.24 to 0.15 m/y. Since data strongly suggest that a collapsed THC was not a steady state during the last glacial, we restore the THC by increasing the vertical diffusivity in the North Atlantic Ocean for a finite time. The resulting climate cycles associated with conveyor-on and conveyor-off phases have much larger amplitudes; furthermore, the strong iceberg calving events lead to a larger loss of ice sheet mass and hence the period of the oscillations is longer (several thousand years). This revised version was published online in August 2006 with corrections to the Cover Date.     

Harmonic generation past a submerged porous step

Experiments were conducted in a wave flume to study the differences between harmonic evolution of monochromatic waves as they propagate over a submerged impermeable or porous step under non-breaking conditions. Results are used as a preliminary analysis to establish some engineering design criteria on harmonic generation on submerged porous structures. The root-mean-squared wave height evolution is also studied and compared to linear models as a first approximation. It is shown that porous structure increases the effective relative depth and decreases the relative wave height, resulting in a lower Ursell number and a lower chance to generate harmonics. The effective water depth over a step as defined in the paper, provides information to evaluate the potential harmonic generation.     

Impact of Sea-Land Interaction on Evolution of Taihu Lake

1 .IntroductionFor Lakes near the middle andlower reaches of the Yangtze River ,theformationof lake basinsisgreatly affected by geological structures ,andthe interaction betweenrivers and seas .The Taihu Lakeis locatedinthelow-lying plain nearthe east coa…     

Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.     

Internal wave eigenmodes and their weak nonlinear resonant interaction in a nonlinearly stratified fluid—A preliminary theoretical and experimental study

A preliminary theoretical and experimental study was conducted on internal wave modes and their weak nonlinear resonant interaction in a nonlinearly stratified fluid. An asymptotical solution of the modes and a dispersion relation of internal waves in a stratified fluid with density profile similar to that in our experiment were obtained theoretically. The resonant-interaction mechanism to 2nd order approximation is also discussed. The resonant interaction of the 3rd and 4th mode internal waves excited by the unstable 1st mode wave is analyzed on the basis of data obtained by conductivity probes. The resonant-interaction condition, i.e., ,k ₁+k ₃+k ₄=0, is examined. It is shown that the resonant instability increases with pycnocline thickness and wave maker driving frequency. This work is supported by the National Natural Science Foundation of China.     

基于MSA特征的遥感图像多目标关联算法

遥感图像中多目标关联存在以下两个问题:一是低时间分辨率观测使得目标状态信息无法准确估计,基于Kalman滤波的多目标关联算法不再适用;二是基于图像特征的目标关联算法又无法处理大场景观测中多个目标关联引起的模糊性.针对上述问题,提出一种基于多尺度自卷积特征匹配和关联代价矩阵最优化的多目标关联算法.实验表明该算法对遥感图像中多目标关联问题具有一定的适用性.     

多尺度空间线状实体形状相似关系的表达与度量

本文对空间数据多尺度表达中线状实体综合前后的形状相似性进行了描述、分析和研究。通过调查统计,得出了衡量线状实体形状相似程度的两个重要参量SIMⅠ、SIMⅡ,基于这两个参量给出了空间线状实体形状相似性的定义以及在不同尺度下线状实体形状相似性的度量方法,并用实例进行验证。为空间数据多尺度表达时线状实体的形状表达提供了一种分析和评价手段。     

空间索引与多尺度表达的一体化模型研究

在分析各种常用索引的基础上,依据各自的适用范围,提出了对点对象建立格网索引,对线、面对象建立改进四叉树索引的组合优化策略。设计的改进四叉树索引避免了传统四叉树的重复索引,提高了数据访问的效率。     

Mechanism for the rapid motion of the Qianjiangping landslide during reactivation by the first impoundment of the Three Gorges Dam reservoir, China

The first impoundment of the Three Gorges Dam reservoir in China started from a water surface elevation of 95 m on June 1, 2003 and reached 135 m on June 15, 2003. Shortly after the water level reached 135 m, many slopes began to deform and some landslides occurred. The Qianjiangping landslide is the largest one; it occurred on the early morning of July 14, 2003 and caused great loss of lives and property. Field investigation revealed that, although failure occurred after the reservoir reached 135 m, the stability of the slope was already reduced by preexisting sheared bedding planes. To study the mechanism of the rapid motion of this reactivated landslide, two soil samples were taken from a yellow clay layer and a black silt layer in the sliding zone, respectively, and a series of ring shear tests were conducted on the samples. One series of ring shear tests simulates the creep deformation behavior, while the other series simulates different shear rates. Conclusions drawn from analysis of the ring shear tests indicate that the mechanism of the rapid motion of the reactivated landslide was caused by the rate effect of the black silt layer during the motion phase after the creep failure. The yellow clay layer did not play any important role in the rapid motion in the 2003 event.     

Multi-Scale Texture Modeling

Patterns of crystallographic preferred orientation are referred to as texture. The specific subject of texture analysis is the experimental determination and interpretation of the statistical distribution of orientations of crystals within a specimen of polycrystalline material, which could be metals or rocks. The objective is to relate an observed pattern of preferred orientation to its generating processes and vice versa. In geosciences, texture of minerals in rocks is used to infer constraints on their tectono-metamorphic history. Since most physical properties of crystals, such as elastic moduli, the coefficients of thermal expansion, or chemical resistance to etching depends on crystal symmetry and orientation, the presence of texture imparts directional properties to the polycrystalline material. A major issue of mathematical texture analysis is the resolution of the inverse problem to determine a reasonable orientation density function on SO(3) from measured pole intensities on , which relates to the inverse of the totally geodesic Radon transform. This communication introduces a wavelet approach into mathematical texture analysis. Wavelets on the two-dimensional sphere and on the rotational group SO(3) are discussed, and an algorithms for a wavelet decomposition on both domains following the ideas of Ta-Hsin Li is given. The relationship of these wavelets on both domains with respect to the totally geodesic Radon transform is investigated. In particular, it is shown that the Radon transform of these wavelets on SO(3) are again wavelets on . A novel algorithm for the inversion of experimental pole intensities to an orientation density function based on this relationship is developed.