四川石棉草科穹状岩浆核杂岩构造特征

位于扬子陆块西缘的石棉草科穹状变形变质体,据近年来的研究表明,该穹隆体经历了三次变形变质时期：早期为收缩滑脱变形的区域动力变质、中期热隆伸展动热变质和后期岩浆热接触变质。对主期变质划分出黑云母带、石榴石带、红柱石－十字石带和矽线石带,确定为低压相系,利用变质反应、矿物地质温压计及相关的同位素年龄资料,建立了草科穹状变形变质体演化的ｐ－Ｔ－ｔ－Ｄ轨迹。轨迹图呈顺时针形式,具碰撞造山带环境的特点,变形变质过程受变质体前缘西油房韧性剪切带逆冲－推覆作用和后缘碰撞晚期岩浆大规模上侵的双重制约,为深源岩浆热动力变质成因,属穹状岩浆核杂岩构造。     

胶东早元古代荆山群变质作用演化样式及其构造环境探讨

胶东地区发育大面积的早无古代变质地层──荆山群。该套岩系经历了三期五个阶段的变质作用,峰期温压条件为T＝700～750℃,p＝0．50～0．60GPa,达角闪麻拉岩相。变质作用pTt轨迹为逆时针形式,反映早元古代陆缘壳内裂陷带的闭合过程。     

9711号台风的移动路径和影响山东的特大暴雨分析

对９７１１号台风的移动路径及其造成的暴雨进行了分析。分析表明,副高外围环流在台风移动过程中有明显的引导作用;台风的移动路径和暴雨落区与正涡度轴线及高能轴线都有较好的对应关系;对流层中层变能场的分布对台风移动路径有明显的预报指示意义。     

New Damage-locating Method for Bridges Subjected to a Moving Load

A new damage-locating method for bridges subjected to a moving load is presented, and a new ‘moving load damage-locating indicator＇ （MLDI） is introduced. A vehicle is modeled as a moving load, the bridge is simplified as an Euler-Bernoulli beam, and the damage is simulated by a reduction of stiffness properties of the elements. The curvature and MLDI values at each node of the baseline model （undamaged） and the damage model are computed respectively. Then the damage or damages can be located from a sudden change of the MLDI value. The feasibility and effectiveness of the proposed method are validated by numerical simulation. The results indicate that the method is effective, being able to not only locate a single damage accurately, but also locate multiple damages in simply-supported bridges, including multiple damages in continuous bridges. The results also indicate that the MLDI can accurately locate damages under 5% measurement noise.     

The Narryer Gneiss Complex of the Yilgarn Block, Western Australia: a segment of Archaean lower crust uplifted during Proterozoic orogeny

The Narryer Gneiss Complex of the Yilgarn Block is a key segment of the Western Australian Precambrian Shield. It is a regional granulite facies terrain comprised of predominantly quartzo-feldspathic gneisses derived from granitic intrusions c. 3.6–3.4 Ga old. Granulite facies metamorphism occurred c. 3.3 Ga ago, and conditions of 750–850°C and 7–10 kbar are estimated for the Mukalo Creek Area (MCA) near Errabiddy in the north. The P–T path of the MCA has been derived from metamorphic assemblages in younger rocks that intruded the gneisses during at least three subsequent events, and this path is supported by reaction coronas in the older gneisses. There is no evidence for uplift immediately following peak metamorphism of the MCA, and a period of isobaric cooling is inferred from the pressures recorded in younger rocks. Pressures and temperatures estimated from metadolerites, which intruded the older gneisses during ‘granite–greenstone’tectonism at about 2.6 Ga and during early Proterozoic thrusting show that the Errabiddy area remained in the lower crust, although it was probably reheated during the younger events. Isothermal uplift to upper crustal levels occurred at c. 1.6 Ga ago, and was followed by further deformation and patchy retrogression of high-grade assemblages. The effects of younger deformation, cooling and reheating can be discerned in the older gneisses, but as there has been no pervasive deformation or rehydration, the minerals and microstructures formed during early Archaean granulite facies metamorphism for the most part are retained. The MCA remained in the lower crust for about 1700 Ma following peak metamorphism and some event unrelated to the original metamorphism was required to exhume it. Uplift occurred during development of the Capricorn Orogen, when some 30–35 km were added to the crust beneath the Errabiddy area. The recognition of early Proterozoic thrusting, plus crustal thickening, suggests that the Capricorn Orogen is a belt of regional compression which resulted from convergence of the Yilgarn and Pilbara Cratons.     

Evaluating the stress intensity factors of anisotropic bimaterials using boundary element method

This paper presents a boundary element method (BEM) procedure for a linear elastic fracture mechanics analysis in two‐dimensional anisotropic bimaterials. In this formulation, a displacement integral equation is only collocated on the uncracked boundary, and a traction integral equation is only collocated on one side of the crack surface. A fundamental solution (Green's function) for anisotropic bimaterials is also derived and implemented into the boundary integral formulation so that except for the interfacial crack part, the discretization along the interface can be avoided. A special crack‐tip element is introduced to capture the exact crack‐tip behavior. A computer program using FORTRAN has been developed to effectively calculate the stress intensity factors of an anisotropic bimaterial. This BEM program has been verified to have a good accuracy with previous studies. In addition, a central cracked bimaterial Brazilian specimen constituting cement and gypsum is prepared to conduct the Brazilian test under diametral loading. The result shows that the numerical analysis can predict relatively well the direction of crack initiation and the path of crack propagation. Copyright © 2007 John Wiley & Sons, Ltd.     

基于滑动L2优化准则的GPS坐标时间序列重构

GPS坐标时间序列中不仅包含白噪声,还包含闪烁噪声、随机漫步噪声等有色噪声,这些噪声将影响GPS应用的可靠性,甚至可能对一些地球物理现象做出错误的解释,因此降低GPS坐标时间序列中有色噪声的影响、提高GPS精度是一个重要和基本的问题。提出了一种滑动L₂优化估计方法(ML₂),通过选取合适的窗口建立L₂优化模型,再利用交替迭代乘子法求解每段时间序列的优化问题,并逐年滑动得到整段GPS坐标时间序列的估计。实验结果表明,ML₂方法与奇异谱分析、小波分解、滑动普通最小二乘法相比具有更好的重构效果。     

利用MODIS卫星产品分析西南地区云水特征

采用NASA Goddard Earth Science DAAC发布的2001—2010年MODIS水云云水含量和水云粒子有效半径资料, 选取西南地区（四川、重庆、云南、贵州）,分析了水云云水含量和水云粒子有效半径的多年平均空间分布特征,对年和季节平均水云云水含量和粒子有效半径进行了线性趋势分析,并进行了显著性检验。结果表明：西南地区年和季节多年平均云水含量在海拔高的地方偏少,在海拔低的地方偏多;年和季节多年平均粒子有效半径的空间分布特征与云水含量相反。云水含量具有季节差异性,秋季和夏季是云水含量最丰富的季节,春季和冬季较少;粒子有效半径的季节差异较小。10年中云水含量呈减少趋势,春季和冬季云水含量减少趋势明显;而粒子有效半径无显著变化趋势。     

基于HYSPLIT4的一次四川盆地夏季暴雨水汽路径和源地分析

利用四川省156站气象资料、全球同化系统(GDAS)资料,引入拉格朗日混合单粒子轨道模型(HYSPLIT4),定量分析了2013年7月7—11日四川盆地西部暴雨的水汽输送情况。结果表明：此次暴雨过程的水汽主要来自950和850 hPa,并且两者的水汽路径和来源有着显著差别。后向追踪1天,950和850 hPa的水汽来源大值区都出现在四川盆地区;追踪3天,950 hPa的水汽来源大值区仍然在四川盆地附近,但是850 hPa上则追踪到孟加拉湾东部;追踪到9天时,950 hPa的水汽主要来源出现在阿拉伯海到我国南海地区,850 hPa上则追踪到索马里半岛东部。总体上950 hPa的水汽输送路径有五条,其中两条是北方路径,另外三条为南方路径。850 hPa的水汽输送路径有两条,一条是北方路径,另一条是南方路径。定量分析指出,950 hPa的水汽源地主要有四个,其中阿拉伯海—孟加拉湾地区的水汽输送贡献率最大（44.1%）,中南半岛—南海地区的水汽贡献率次之（33.1%）,巴尔喀什湖地区（15.7%）和贝加尔湖地区（7.1%）的水汽贡献率相对较弱。850 hPa上的水汽源地也有四个,其中从阿拉伯海地区,沿南亚夏季风爆发路径而来的暖湿空气最重要（89.4%）,其次从西北部巴尔喀什湖—贝加尔湖地区而来的干冷空气相对较弱（6.3%）,而来自孟加拉湾（3%）和局地（1.3%）的水汽则非常少。     

GRAPES_RAFS系统2 m温度偏差订正方法研究

本文通过对2013年6月20日至7月20日GRAPES(Global and Regional Assimilation and Prediction System)_RAFS(Rapid Analysis and Forecast System)系统每天8个时次每3h的2 m温度预报进行分析,发现各时次的预报均能较好地表征2 m温度日变化特征,但预报与实况存在一定的偏差,其中西藏东部川西高原、云贵高原、江南武夷山脉偏低于实况可达3℃,而华北地区偏高于实况3℃以上.为了减小GRAPES_RAFS系统偏差对2m温度预报的影响,本文采用平均法、双权重平均法、滑动平均法和滑动双权重平均法分别对GRAPES_RAFS系统2 m温度预报产品进行偏差订正,并对订正前后的结果进行检验分析和对比.结果表明:2 m温度订正后的平均误差大部地区减小到(一1～1℃),而均方根误差大部地区降低到2.5℃内.对于偏差较大地区,订正效果更为明显,如西藏东部川西高原,经过订正,平均误差绝对值由订正前3℃以上降低到1℃内,而RMSE由订正前4℃以上控制到3℃内.对比四种订正方法,双权重订正方法与平均法订正整体效果接近,但对个别站点,双权重订正法要优于平均法,经过滑动的订正方法比无滑动的订正方法订正效果更好,订正效果最好的是滑动双权重平均法,全国平均误差大部分在(-0.5～0.5℃)内,不超过(-1～1℃)的范围.