Estimation of near surface soil moisture in a sloping terrain of a Himalayan watershed using ENVISAT ASAR multi‐incidence angle alternate polarisation data

Soil moisture is one of the important input variables in hydrological and water erosion models. The extraction of information on near surface soil moisture from synthetic aperture radar (SAR) is well established mostly for flat terrain and using low incidence angle single polarisation data. The ENVISAT advanced SAR (ASAR) data available in multiple incidence angles and alternate polarisation modes were investigated in this study for soil moisture estimation in sloping terrain. The test site was Sitla Rao watershed in the Lesser Himalayas of northern India. Empirical models were developed to estimate near surface soil moisture in bare agricultural fields using alternate polarisation ASAR data. Both soil moisture and surface roughness field measurements were performed during the satellite passes. Backscatter from medium incidence angle (IS‐4) and vertical‐vertical (VV) polarisation signal is correlated better with volumetric soil moisture content compared to other incidence angles. The model parameters were further improved, and soil moisture estimation was refined by combining medium incidence angle (IS4) vertical‐horizontal polarisation response as another variable along with VV polarisation response. The effect of slope on the radar backscatter was minimized by incorporating local incidence angles derived from an ASTER DEM. Copyright © 2012 John Wiley & Sons, Ltd.     

Influence of a coarse interlayer on seawater intrusion and contaminant migration in coastal aquifers

Vertical 2D slice laboratory experiments were carried out in homogenous and layered sand tanks to elucidate the effects of a highly permeable (coarse‐grained sand) interlayer on seawater intrusion and transport of contaminants to a coastal sea. Tidal fluctuations produced oscillations in the seawater–freshwater transition zone, fluctuations of the contaminant infiltration rate and a zigzag contaminant plume outline. The seawater wedge became discontinuous at the (vertical) edges of the interlayer because of increased lateral movement of the seawater–freshwater interface within the interlayer. The contaminant plume formed a tail within the interlayer depending on the tidal stage, and similar to the wedge, its movement was accentuated. A simple analytical model that neglected vertical flow reliably predicted steady‐state seawater intrusion into the coastal aquifer. Numerical modeling was used to gain insight into the groundwater hydrodynamics and contaminant migration. The numerical results confirmed the experimental findings, i.e. that a highly permeable interlayer can provide a rapid transit path for contaminants to reach the seaward boundary and that the interlayer amplifies the effects of tidal fluctuations, resulting in wider transition zones for the seawater wedge and contaminant plume. Numerical simulations further showed that, with increasing interlayer hydraulic conductivity, the maximum seawater intrusion distance inside the interlayer increases approximately linearly. For the fixed‐head contaminant injection condition used, the model showed that contaminant infiltration increases approximately logarithmically with increasing interlayer hydraulic conductivity (other factors held fixed). Copyright © 2013 John Wiley & Sons, Ltd.     

Numerical modelling of desiccation cracking

The ability to model and predict the formation of desiccation cracks is potentially beneficial in many applications such as clay liner design, earth dam construction, and crop science, etc. However, most studies have focused on statistical analysis of crack patterns and qualitative study of contributing factors to crack development rather than prediction. Because it is exceedingly difficult to capture the nonlinear processes during desiccation in analytical modelling, most such models handle crack formation without considering variation of material properties with time, and are unattractive to use in realistic modelling. The data obtained from laboratory experiments on clay soil desiccating in moulds were used as a basis to develop a more refined model of desiccation cracking. In this study, the properties, such as matric suction, stiffness and tensile strength of soil, and base adhesion, could be expressed approximately as functions of moisture content. The initial conditions and the development of suction due to desiccation and the varying material properties were inputted to UDEC, a distinct element code, using its internal programming language FISH. The model was able to capture some essential physical aspects of crack evolution in soil contained in moulds with varying lengths, heights, and materials of construction. Extension of this methodology is potentially beneficial not only for modelling desiccation cracking in clay, but also in other systems with evolving material properties such as concrete structures and road pavements. Copyright © 2010 John Wiley & Sons, Ltd.     

Monitoring over‐winter soil water dynamics in a freezing and snow‐covered environment using a thermally insulated tensiometer

Water potential below a frozen soil layer was continuously monitored over an entire winter period (using thermally insulated tensiometers sheltered in a heated chamber) along with other soil, snow and atmospheric variables. In early winter, the freezing front advanced under a thin snow cover, inducing upward soil water flow in the underlying unfrozen soil. The freezing front started to retreat when the snow cover became thick enough to insulate the soil, resulting in the reversal of the flow direction in the unfrozen zone. These data provide a clear illustration of soil water dynamics, which have rarely been monitored with a tensiometer. Copyright © 2005 John Wiley & Sons, Ltd.     

一种裸露土壤湿度反演方法

针对目前土壤湿度反演方法研究较少且缺少实时性的现状,该文提出一种土壤湿度反演方法——最小二乘支持向量机技术。以积分方程模型为正向算法,数值模拟不同雷达参数(频率、入射角及极化)下后向散射系数随土壤含水量和地表粗糙度的变化情况。经过数据敏感性分析,选取C-波段和X-波段、小入射角下的同极化后向散射系数作为支持向量回归的训练样本信息;经过适当的训练,利用支持向量回归技术对土壤含水量进行了反演研究;并考虑通过多频率、多极化、多入射角数据的组合,消除地表粗糙度的影响,提高反演精度。模拟结果表明,该方法反演土壤湿度具有较高的精度和较好的实时性;同时,与人工神经网络方法的结果比较,证明了该方法的有效性,为土壤湿度的反演研究提供了一种方法。     

Three dimensional seismic studies of deep-water hazard-related features on the northern slope of South China Sea

Mass transport deposits and geological features related to fluid flow such as gas chimneys, mud diapirs and volcanos, pockmarks and gas hydrates are pervasive on the canyon dominated northern slope of the Pearl River Mouth basin of the South China Sea. These deposits and structures are linked to serious geohazards and are considered risk factors for seabed installations. Based on high resolution three dimensional seismic surveys, seismic characteristics, distributions and origins of these features are analyzed. A distribution map is presented and geometrical parameters and spatial distribution patterns are summarized. Results show that various groups of the mapped features are closely tied to local or regional tectonism and sedimentary processes. Mass transport complexes are classified as slides near the shelf break, initially deformed slumps on the flanks of canyons and highly deformed slumps on the lower slope downslope of the mouth of canyons. We propose them to be preconditioned by pore pressure changes related to sea level fluctuations, steep topography, and fluid and fault activities. Gas chimneys are mainly located in the vicinity of gas reservoirs, while bottom-simulating reflectors are observed within the gas chimney regions, suggesting gas chimneys serve as conduits for thermogenic gas. Mud diapirs/volcanos and pockmarks are observed in small numbers and the formation of pockmarks is related to underlying gas chimneys and faults. This study aims at reducing risks for deep-water engineering on the northern slope of South China Sea.     

Development and Extension of An Aggregated Scale Model: Part 1 – Background to ASMITA

Whilst much attention has been given to models that describe wave, tide and sediment transport processes in sufficient detail to determine the local changes in bed level over a relatively detailed representation of the bathymetry, far less attention has been given to models that consider the problem at a much larger scale (e.g. that of geomorphological elements such as a tidal flat and tidal channel). Such aggregated or lumped models tend not to represent the processes in detail but rather capture the behaviour at the scale of interest. One such model developed using the concept of an equilibrium concentration is the Aggregated Scale Morphological Interaction between Tidal basin and Adjacent coast (ASMITA). In this paper we provide some new insights into the concepts of equilibrium, and horizontal and vertical exchange that are key components of this modelling approach. In a companion paper, we summarise a range of developments that have been undertaken to extend the original model concept, to illustrate the flexibility and power of the conceptual framework. However, adding detail progressively moves the model in the direction of the more detailed process-based models and we give some consideration to the boundary between the two.     

The Sediment Source and Transport Trends around the Abandoned Yellow River Delta,China

Sediment source and transport trends are influenced by various hydrodynamic factors, and thus play important roles in sedimentary evolution and coastal stability. To examine sediment transport trends around the abandoned Yellow River delta promontory and its erosion mechanism, we employ empirical orthogonal function (EOF) analysis to study sedimentary characteristics and transport trends of the abandoned Yellow River delta in northern Jiangsu Province, China. The results showed that: (1) the main sediment source in the abandoned Yellow River delta is the submarine coastal slope and both sides of the abandoned Yellow River Delta; (2) the main hydrodynamics controlling sediment transport is the current that runs along the shore, coupled with waves, especially southward currents; (3) the sediment of the study area was redistributed under hydrodynamics; coarse sediments were eroded and broadly transported to the south. Therefore, it is concluded that the sediment sources and transport have important influence on coastal evolution: the sediment source area shows mass loss of deposits and erosion; deposits in the submarine coastal slope provide the source and were continuously eroded to provide materials to other places as a sediment source.     

Electrical analogy for modelling thermal regime and moisture distribution in sandy soils

The soil mass is subjected to temperature variation due to several human activities (viz. tanks storing heated fluids, buried cables and pipelines, air-conditioning ducts, disposal of nuclear and thermal power plant wastes etc.), which result in heat-induced migration of the moisture in it. Though several studies have been conducted in the past to investigate the mechanism of heat migration through the soil mass, a methodology for ‘real-time measurement of the variations in temperature, flux and moving moisture front, in tandem, with respect to space' has rarely been attempted. In this context, extensive laboratory investigations were conducted to measure real-time flux and temperature variations in the sandy soils, and the validation of results has been done by employing an equivalent electrical circuit programme, LTspice. Subsequently, a mathematical model PHITMDS (i.e. Prediction of Heat-Induced Temperature and Moisture Distribution in Soil) has been developed and its utility and efficacy, for predicting the depth-wise temperature and heat-induced moisture migration, due to evaporation, in terms of position of moving moisture front in the sandy soil has been critically discussed and demonstrated.     

京津冀地区低层局地大气环流的气候特征研究

本文采用2007-2016年的中尺度数值模拟结果和15个地面气象站观测资料,定义了局地风场表征风速,研究京津冀平原地区局地大气环流日变化的气候特征,并对区域大气污染及其输送的影响进行分析。此外,对2016年12月30日至2017年1月7日北京地区跨年大气重污染过程进行了个例分析。得到结论:京津冀平原地区低空风场变化是天气系统与局地大气环流共同作用的结果,山谷风环流致使太行山和燕山沿线平原地区大气边界层内的长年主导风向为偏北和偏南;太行山和燕山沿线地区山谷风环流本身呈顺时针旋转的日变化特征,夜间至早晨谷风转向山风,午后至夜间山风转向谷风;在午后谷风向山风转向期间,容易形成沿太行山东麓和燕山南麓、自南向东北的"弓形"气流输送通道,此气流输送通道在1月于21时左右形成,持续时间大约3 h,在7月于18时左右形成,持续时间可达9 h;冬季午后至晚间盛行谷风时,受山体的阻挡,污染物容易在山前累积,导致污染浓度增高;夏季同样的情况会发生在后半夜。