Effect of a submerged bay-mouth breakwater on tsunami behavior analyzed by 2D/3D hybrid model simulation

The hybrid numerical model had been developed to simulate a complicated 3D flow around structures generated by tsunami. In the model, the conventional 2D model is adopted for the wide region far from structures and the 3D non-hydrostatic pressure model is used in the limited region adjacent to structures. The applicability of the model is shown by comparisons of the numerical results with the experimental results of the laboratory model tests and the numerical analysis results of the conventional whole 2D simulation. In addition, the effect of a submerged structure at the opening of a breakwater is discussed from the numerical simulations by the hybrid model. The submerged structure improves the stability of the rubble mound and reduces the tsunami inflow into the bay, while it increases the water surface velocity around the opening of the breakwater. The increase of surface velocity causes the increases of impulsive forces by collision with drafts and so on.     

Water–rock interaction during the process of steam stimulation exploitation of viscous crude oil in Liaohe Shuguang Oil Field, Liaoning, China

In the process of steam stimulation exploitation of viscous crude oil, the injected water, at high temperature and under high pressure, reacts intensively with the host rock. This kind of water–rock interaction in Liaohe Shuguang Oil Field was studied on the basis of analysis of water composition changes, laboratory experiments, mineral saturation indices analysis, and mass balance calculation. Compared with the injected water, the changes of the composition of discharged water are mainly the distinct decrease of pH, Na⁺, SiO₂ and Cl⁻, as well as the increase of K⁺, Ca²⁺, Mg²⁺, SO ₄ ²⁻ and HCO ₃ ⁻ . Laboratory experiments under field conditions showed: the dissolution sequence of minerals quantitatively is quartz>potassium feldspar>albite, and the main change of clay minerals is the conversion of kaolinite to analcime. Mass balance calculation indicated during the process of steam stimulation, large quantities of analcime are precipitated with the dissolution of large amounts of quartz, kaolinite, potassium feldspar, and CO₂. These results correlated very well with the experimental results. The calculated results of Liaohe Shuguang Oil Field showed that during the steam stimulation for viscous crude oil, the amounts of minerals dissolved (precipitated) are huge. To control the clogging of pore spaces of oil reservoirs, increased study of water–rock interaction is needed.     

Assessment of sand encroachment in Kuwait using GIS

Assessment of sand encroachment in Kuwait using Geographical Information System (GIS) technology has been formulated as a Multi-Criteria Decision Making problem. The Delphi method and Analytical Hierarchy Process were adopted as evaluating techniques, in which experts’ judgments were analyzed for objectively estimating and weighting control factors. Seven triggering factors, depicted in the form of maps, were identified and ordered according to their priority. These factors are (1) wind energy; (2) surface sediment; (3) vegetation density; (4) land use; (5) drainage density; (6) topographic change and (7) vegetation type. The factor maps were digitized, converted to raster data and overlaid to determine their possible spatial relationships. Applying a susceptibility model, a map of sand encroachment susceptibility in Kuwait was developed. The map showed that the areas of very high and high sand encroachment susceptibility are located within the main corridor of sand pathway that coincides with the northwesterly dominant wind direction.     

Experimental and numerical studies of rock salt strain hardening

The work presented in this paper comes as part of a research program dealing with the thermomechanical behaviour of rock salt. It aims to study laboratory and in-situ long-term behaviour by means of creep tests with deviator and temperature changes. The laboratory results, using a triaxial multi-stages creep tests, highlighted the strain hardening character of rock salt. Furthermore, the in-situ results, using a borehole dilatometer multi-step creep test, have shown that the drilling is carried out in a weakly stressed pillar. The interpretation of the laboratory results, using the J.LEMAITRE law, did not indicate full agreement with all the test results. As a result a ‘double’ J.LEMAITRE model, which takes into account a double strain hardening variable, has been put forward. The validation of this model on the laboratory creep tests is very satisfactory. Furthermore, the activation energy seems satisfactory to represent the influence of the temperature. The in-situ behaviour modelling is clearly more complex than the modelization based on laboratory tests. In fact, it seems that if the rock salt behaviour is maintained by J.LEMAITRE law, it is necessary to vary with the stress, at least, one of the parameters assumed constant in the basic law.     

A Bay–River Coupled Model for Storm Surge Prediction Along the Andhra Coast of India

The paper describes a two-dimensional bay–river coupled numerical model for storm surges along the Andhra coast of India. The effect of the Krishna and Godavari rivers on the surge development is analysed. A comparative study of the surge generated by a tropical cyclone with and without the inclusion of rivers is done in detail. Three cyclones that struck the Andhra coast in November 1977, May 1990 and November 1996 were used for the simulation studies. It is found that the idealized model without a river overestimates the sea-level elevation as compared to a more realistic bay–river coupled model. The temporal variation of surge values at the mouth of the rivers is also studied for all three cyclone cases. It is found that the effect of the presence of rivers depends on the strength of the cyclone, its point of landfall and the location of the rivers with respect to the landfall point.     

A Connectivity Index for Discrete Fracture Networks

Connectivity is an important measure for assessing flow transport in rock, especially through fractures. In this paper, rock fracture systems are modelled by a discrete fracture model simulated by a marked point process. A connectivity index is then introduced to quantify the connectivity between any two points in space. Monte Carlo simulation is used to evaluate the connectivity index for stationary cases and relationships between the connectivity index and the parameters of the discrete fracture model are analysed. The average number of intersections per fracture, X_f, and the fracture intensity, P12 (P32), are calculated and the relationships between these parameters and the connectivity index are investigated, concluding that X_f is the more suitable parameter for the classification of rock mass flow properties. The relationships between the connectivity index and the percolation state of the fractured medium are also discussed. An edge correction is briefly discussed and a practical example is used to demonstrate the method of computing the connectivity index.     

长江口水域多光谱遥感水深反演模型研究

利用Landsat-7 ETM 遥感影像反射率和实测水深值之间的相关性可以探测水深。该文介绍单波段、双波段比值和多波段3种线性回归模型以及动量BP人工神经网络水深反演模型。选择长江口北港河道上段作为研究区,利用上述模型,分两种情况进行水深反演:一是以河道全部历史样本建模;二是将河道按自然水深划分为浅水区和深水区分别建模。结果表明:神经网络模型预测精度高于线性回归模型;水深分区后线性回归和神经网络模型预测误差均有所减小。     

宁夏产业结构演进与经济增长系统研究

产业结构的演进与升级一定程度上反映了区域经济的发展阶段与发展能力。以1978-2003年的统计数据为基础,系统研究了宁夏产业结构变迁与区域经济发展的关系。研究结果表明:(1)宁夏产业结构的变化符合产业结构变迁的一般规律,但产业结构高度化水平依然低下;(2)宁夏产业结构变迁的空间集聚效应明显;(3)宁夏产业结构演进对经济增长的影响形成产业结构偏离为正,竞争力偏离份额为负型、产业结构偏离为正,竞争力偏离份额为正型和产业结构偏离为负,竞争力偏离份额为正型三种类型;(4)产业结构变迁对各地区经济增长的影响差异较大。研究指出,在西部大开发和区域经济一体化进程中,以及在国家和地区产业政策调整的背景下,建立产业协调与分工合作机制,发展特色优势产业,推进重点地带布局开发,形成区域性“群落型”经济优势,成为新时期宁夏产业结构调整的战略选择。     

湿地生态系统碳循环过程及碳动态模型

从地上、地下有机物质生产对湿地碳输入的贡献,湿地土壤碳库以及土地利用变化对湿地土壤碳库和碳排放的影响,甲烷排放和可溶性有机碳输出以及影响因子,湿地生态系统碳循环动态模型4个方面对湿地生态系统碳循环国内外研究进展和研究成果进行综述、分析,提出了我国亚热带区域天然湿地碳循环研究的主要热点和方向:⑴沿海湿地碳库估算及土地利用转化对土壤碳库和温室气体排放的影响;⑵酸沉降对于我国东南沿海低纬度地区湿地甲烷排放的影响;⑶沿海湿地生态系统碳循环动态模型的应用与开发;⑷湿地系统可溶性有机碳的输出机理探讨.     

Evolution of the Bonneville shoreline scarp in west-central Utah: Comparison of scarp-analysis methods and implications for the diffusion model of hillslope evolution

Wave-cut pluvial shoreline scarps are ideal natural experiments in hillslope evolution because the ages of these scarps are often precisely known and because they form with a range of heights, alluvial textures, and microclimates (i.e., orientation). Previous work using midpoint-slope methods on pluvial scarps in the Basin and Range concluded that scarp evolution is nonlinear and microclimatically controlled. The purpose of this study was to further examine the influence of scarp height, texture and microclimate in an attempt to calibrate a nonlinear model of scarp evolution. To do this, over 150 profiles of the Bonneville shoreline in the adjacent Snake and Tule Valleys, west-central Utah were collected and analyzed by fitting the entire scarp profile to diffusion-equation solutions, taking into account uncertainty in the initial scarp angle. In contrast to previous studies, this analysis revealed no evidence for nonlinearity or microclimatic control. To understand the reason for this discrepancy, we undertook a systematic study of the accuracy of each scarp-analysis method. The midpoint-slope-inverse method was found to yield biased results, with systematically higher diffusion ages for young, tall scarps. The slope-offset method is unbiased but has limited resolution because it requires many scarp profiles to yield a single diffusion age. A method that incorporates the full scarp profile and uncertainty in the initial scarp angle was found to be the most accurate technique. The application of the full-scarp method to the Bonneville shoreline supports the use of a linear diffusion model for scarps up to 20 m in height. Scarp orientation had no discernable effect on diffusivity values. Soil texture was found to have a weak but significant inverse relationship with diffusivity values.