南、北极雪、冰、水中的痕量元素离子与水汽化学

应用水汽化学的方法学和理论,研究南,北极雪,冰,水中的Ｚｎ＾２＋等离子,南北,极雪,冰,水中Ｚｎ＾２＋,Ｃｄ＾２＋,Ｐｂ＾２＋,Ｃｕ＾２＋,Ｓｎ＾４＋,Ｂｉ＾３＋离子含量的空间变化很小,与水汽化学原理计算的离子总平均含量Ｚｎ＾２＋,５．０μｇ／Ｌ,Ｐｂ＾２＋＋０．０３０μｇ／Ｌ,Ｃｕ＾２＋＋０．７０μｇ／Ｌ,Ｓｎ＾４＋＋０．９９μｇ／Ｌ,Ｂｉ＾３＋＋０．１８μｇ／Ｌ相一致。南北极Ｚｎ＾２＋等离子处     

广东近岸海湾表层沉积物的稀土元素特征及其物源示踪

本文对广东省近岸10个典型海湾的表层沉积物进行了系统的稀土元素(rare earth elements,REE)测试和分析,以期发现沉积物的物源组成特征及其控制因素。研究结果表明,同一海湾内沉积物的稀土丰度差异不明显,但不同海湾之间具有一定的差别(133.58—251.77mg.kg 1)。球粒陨石标准化配分曲线表现出轻稀土(La到Eu)富集、重稀土(Gd到Lu)亏损、δEu负异常等典型的陆源沉积物特征;PAAS(Post-Archean Australian Shale)标准化配分模式显示出明显的中稀土(Sm到Ho)富集特征,与已报道的国内河流沉积物REE特征相似。海湾沉积物与入海河流沉积物及流域内的原岩组成特征的比较说明,后者对海湾沉积物的控制作用明显。REE配分曲线的一致性和中稀土富集特征表明海湾沉积物主要来自汇入海湾的山溪及河流输入的沉积物。     

基于多尺度有限元的海上升压站脚靴式桩套筒连接结构分析研究

脚靴式海上升压站导管架的桩套筒与主导管的连接结构是关键荷载传递部位。整体梁系有限元模型无法反应局部板型结构的失效状态;截断板系有限元模型则受制于边界条件的合理性,结果不够精确。文中基于某工程海上升压站,建立不同精细化范围的多尺度有限元模型及不同边界条件的截断模型,对结构屈服失效及屈曲失效复核的同时论证了局部网格对计算精细程度的影响及截断模型对边界条件的敏感性;此外,研究了轭板板厚及应力比对屈曲失效的敏感程度,为今后海上升压站脚靴结构不同阶段的设计、优化提供参考和借鉴。     

长江口新桥水道动力地貌变化过程研究

以泰国湾 T155号柱状沉积物为研究对象,利用地球化学和矿物学手段探讨了全新世以来泰国湾古气候演化历史。(La/Sm)UCC-(Gd/Yb)UCC指示了全新世以来泰国湾西南部物质来源较为稳定,主要来自于马来半岛,季风控制下的沿岸流是其主要驱动力。通过对高岭石/(绿泥石+伊利石)(ωk/(ωc+ωl))、化学蚀变指数(CIA)和钾铝质量分数比值(ωK/ωAl)的变化规律进行综合研究,将全新世以来泰国湾古气候演化过程划分为两个阶段:①早中全新世(12000~6500calaBP):ωk/(ωc+ωl)值和CIA 值较高,ωK/ωAl值则较低,指示了该段时期强盛的东亚季风;发生于11200~10500calaBP和8500~7500calaBP的冷事件指示了泰国湾对新仙女木事件和8.2ka冷事件的响应;②中全新世(6500calaBP)以来:ωk/(ωc+ωl)值和 CIA 值明显下降,ωK/ωAl值则逐渐上升,指示了该段时间东亚季风呈逐渐减弱的趋势;在3200~1800calaBP时地球化学和黏土矿物指标呈现一个明显低值,对应于热带海域“斜氏普林虫低值事件”,揭示了全球气候变化在泰国湾海域良好的区域性响应特征。     

Study on General Performance of Jack-up Under Elevated Condition

Method of checking for jack-up elevated performance including leg structure strength, fixation system or jacking system bearing capacity, pre-load requirements, spud can bearing capacity and overturning stability is suggested in this paper. As an example, a jack-up with truss legs is analyzed by finite element analysis method. This paper may be helpful to the rig owners, operators and designers.     

An Efficient Model for Transient Surface Waves in Both Finite and Infinite Water Depth

A numerical model is developed to simulate fully nonlinear extreme waves in finite and infinite water-depth wave tanks. A semi-mixed Eulerian-Lagrangian formulation is adopted and a higher-order boundary element method in conjunction with an image Green function is used for the fluid domain. The boundary values on the free surface are updated at each time step by a fourth-order Runga-Kutta time-marching scheme at each time step. Input wave characteristics are specified at the upstream boundary by an appropriate wave theory. At the downstream boundary, an artificial damping zone is used to prevent wave reflection back into the computational domain. Using the image Green function in the whole fluid domain, the integrations on the two lateral walls and bottom are excluded. The simulation results on extreme wave elevations in finite and infinite water-depths are compared with experimental results and second-order analytical solutions respectively. The wave kinematics is also discussed in the present study.     

Development and validation of a finite element morphological model for shallow water basins

Recognising the importance of understanding sediment dynamics to evaluate the status of a coastal lagoon environment, this work has been focused on the investigation of the hydrodynamic and sediment transport processes occurring in such basins. In order to describe the lagoon system, a modelling approach combining hydrodynamics, waves and sediment dynamics has been developed. The framework of the numerical model consists of a finite element hydrodynamic model, a third generation finite element spectral wave model and a sediment transport and morphodynamic model for both cohesive and non-cohesive sediments. The model adopts the finite element technique for spatial integration, which has the advantage to describe more accurately complicated bathymetry and irregular boundaries for shallow water areas. The developed model has been applied to test cases and to a very shallow tidal lagoon, the Venice Lagoon, Italy. Numerical results show good agreement with water level, waves and turbidity measurements collected in several monitoring stations inside the Lagoon of Venice. Such a model represents an indispensable tool in analysing coastal problems and assessing morphological impacts of human interference.     

基于南海北部海区浮游植物吸收光谱斜率变化的粒级结构反演

浮游植物的粒级结构是一个重要的生物参数。基于南海北部海区不同水体环境下测量的生物光学数据, 作者深入研究了粒级结构对浮游植物吸收光谱的影响。结果表明, 选择443和510nm波段计算得到的浮游植物光谱斜率S对粒级结构的变化具有较高的敏感性, 其随着小型浮游植物比例的增大呈不断增加的趋势。S与水体叶绿素a浓度、浮游植物吸收系数(aph(443))之间表现出明显的正相关特征。以40%为界对不同粒级浮游植物的优势进行定义, 发现在S与叶绿素a浓度、aph(443)的关系分布中小型(Micro)和微微型(Pico)浮游植物占据优势的水体表现出较为明显的分界, 叶绿素a浓度和aph(443)分别在0.70mg•m-3和0.05m-1附近, 相应的S在0.0004(m•nm)-1左右。基于实测数据建立的遥感反射率蓝绿波段比值与S之间的统计关系, 决定系数高达0.91, 为从水色遥感数据反演浮游植物粒级结构提供了重要手段。     

Finite element modeling of heating phenomena of cracks excited by high-intensity ultrasonic pulses

A three-dimensional thermo-mechanical coupled finite element model is built up to simulate the phenomena of dynamical contact and frictional heating of crack faces when the plate containing the crack is excited by high-intensity ultrasonic pulses. In the finite element model, the high-power ultrasonic transducer is modeled by using a piezoelectric thermal-analogy method, and the dynamical interaction between both crack faces is modeled using a contact-impact theory. In the simulations, the frictional heating taking place at the crack faces is quantitatively calculated by using finite element thermal-structural coupling analysis, especially, the influences of acoustic chaos to plate vibration and crack heating are calculated and analysed in detail. Meanwhile, the related ultrasonic infrared images are also obtained experimentally, and the theoretical simulation results are in agreement with that of the experiments. The results show that, by using the theoretical method, a good simulation of dynamic interaction and friction heating process of the crack faces under non-chaotic or chaotic sound excitation can be obtained.