大连地磁台天文方位角测量

论述大连地磁台天文方位角的测量原理、方法及观测结果,在地磁观测室未封顶的条件下,能在观测墩直接观测北极星,避免比测墩转角换算等因素增加的观测误差,观测精度提高.     

面波法在堤坝隐患勘查中的应用

本文列举了采用面波法勘探探测堤坝管涵、土洞、白蚁巢穴、土体疏松带、滑坡体等隐患及评价坝体质量的成功实例,并对堤坝隐患的工程物探勘查提出建议.     

茶叶中铅同位素比值的测定方法

为了给铅同位素示踪技术在研究茶叶中重金属铅来源的应用奠定基础,通过大量的茶叶炭化、灰化条件试验和铅的分离、纯化、富集与质谱测定试验,拟定了一套茶叶中铅同位素比值的测定方法:将称好的茶叶置于瓷坩埚中,在电热板上小火炭化完全后,移入马弗炉中灰化,用盐酸溶解灰分,转化为混合酸介质,然后上柱分离解吸,蒸干并上质谱测定.该法打破传统,改用盐酸溶解灰分,克服了用硝酸溶样总是有棕色沉淀物的难点.利用这一流程测得的茶叶样品的 207Pb/206Pb的精度( 2σ)优于± 0.05%. 208Pb强度一般均在 1 V以上.监控分析流程的国际标准物质 NBS 981的 207Pb/206Pb为 0.914 49± 0.000 04(其证书值为 0.914 64± 0.000 33),全流程本底铅为 1.6× 10-8量级.     

基于拓扑谓词的空间拓扑关系相似性度量模型与应用

空间拓扑关系相似性度量是空间数据相似性度量的重要组成部分,它是空间数据检索和空间场景相似查询的基础和关键。本文旨在建立一种能够同时度量简单和复杂拓扑关系间的相似性度量模型。首先,以9个拓扑谓词提出一种简单拓扑关系间相似性度量方法,即定义简单拓扑关系之间距离为两个9交集矩阵之间的距离,从而得到简单拓扑关系之间的相似度。然后,综合考虑实体集合间的数量相似度和维数相似度,建立实体集合间的简单拓扑关系相似性度量模型,并在上述实体集合间简单拓扑关系相似性度量的基础上,采用分解-组合的策略先将复杂拓扑关系分解为若干个局部拓扑关系,通过组合局部拓扑关系之间的相似度,直至建立复杂拓扑关系间的相似性度量模型。实验表明,制图综合中的选取对空间实体集合之间拓扑关系相似度的影响最大,其他因素影响较小,因此,其能以拓扑关系相似度来度量制图综合对拓扑关系的改变程度。     

日本MW 9.0级大地震前后华北和东北地区现今构造应力作用调整过程与研究意义探讨

为了探讨日本M_W 9.0级大地震前后华北和东北地区现今构造应力作用调整过程与研究意义,对华北和东北地区进行原位现今地应力绝对测量与实时监测、GPS测量,结果表明：日本大地震在山东半岛、华北北部地区和东北地区所诱发同震位移引起的张性效应调整周期分别约为6个月(即调整结束时间大约在2011年9月)、15个月(即调整结束时间大约在2012年6月)和26个月(即调整结束时间大约在2013年5月),张性效应调整周期与同震位移大小成正比。在这种调整过程中,往往表现出区域现今构造应力作用方式和构造应力场转换,并可能伴随重大地质事件(如地震等)的发生。2012年5月28日和29日、6月18日、8月26日及2013年1月11日在唐山及其周围地区分别发生的4.8级、3.2级、4.0级、3.3级和3.0级地震与华北北部地区构造应力作用方式和构造应力场转换有关,而2013年10月31日以来在吉林省松原市发生的地震群应与东北地区构造应力作用方式和构造应力场转换有关,而非一个大地震前的小震群。     

全站仪的基本测量原理

分析了全站仪的测量原理,使人们对全站仪的工作原理加以认识。     

Comparison of an Electrochemical and Luminescence‐Based Oxygen Measuring System for Use in the Biodegradability Testing According to Closed Bottle Test (OECD 301D)

The effects of persistent organic pollutants on the aquatic environment still can hardly be assessed. Therefore, ready biodegradability is a desired key characteristic of chemicals. Accordingly, biodegradation testing is of utmost importance and is a vital part within the risk assessment for organic chemicals. In the closed bottle test (CBT; OECD 301D) the degree of biological degradation of a chemical is assessed by monitoring the oxygen consumption so far with a Clark electrode as standard method. However, this method is time‐consuming, laborious and led to frequent fluctuations of the test results, which limited their validity. Due to these shortcomings, an optical system that enables contact‐free measuring of the oxygen concentration in a closed bottle, based on dynamic luminescence quenching, was examined. The test results were compared to those obtained with the “classical” electrochemical technique (Clark electrode). At first, a basic standard for the handling of the new instrument in the laboratory was developed. Then possible influencing factors, reliability, comparability, and reproducibility of the test results were investigated by running the CBTs in parallel with the electrode and optode method. The findings proved the new optode method to be unambiguously superior to the electrode technique. The frequency of fluctuations of the test results and time and effort necessary for the test run could considerably be reduced. The degradation kinetics of the test substances could be followed easily in the CBT by increasing the measuring points without much additional effort.     

Pinpointing the sources and measuring the lengths of the principal rivers of the world

Abstract

Cultures throughout the world are associating with the rivers. People depend upon the rivers and their tributaries for food, water, transport, and many other aspects of their daily lives. Unfortunately, human beings have not calculated the accurate lengths for the great rivers even today. The lengths of the rivers are very different in popular textbooks, magazines, atlases and encyclopedias, etc. To accurately determine the lengths of the principal rivers of the world, the combination of satellite image analysis and field investigations to the source regions is proposed in this paper. The lengths of the Nile, Amazon, Yangtze, Mississippi, Yellow, Ob, Yenisey, Amur, Congo and Mekong, with lengths over or close to 5000 km, were calculated using the proposed method. The results may represent the most reliable and accurate lengths of the principal rivers of the world that are currently achievable.     

全数字摄影测量方法在地理信息数据更新中的应用

社会的飞速发展对测绘工作提出了新的要求,数据的现势性、数据采集的快速性矛盾逐渐突出,传统的数据更新方法生产成本高,更新周期长,已不能满足社会高速发展的需要。探索一条快速、高效的数据更新方法迫在眉睫。该文全面介绍了利用全数字摄影测量方法对已有1：1万3D数字产品进行更新的方法和技巧,在很大程度上缩短了数据更新周期,降低了数据更新的成本,提高了工作效率。     

Cass 5.1软件下的数字化内业纠错

阐述了数字化内业制图中,对外业测站错设而引起的大量碎部点测偏的内业纠正,重点探讨了错误产生后的平面和高程数据的纠错处理,有针对性地做出了说明。