Pumpellyite–actinolite facies of the Sanbagawa metamorphism

The pumpellyite–actinolite facies proposed by Hashimoto is defined by the common occurrence of the pumpellyite–actinolite assemblage in basic schists. It can help characterize the paragenesis of basic and intermediate bulk compositions, which are common constituents of various low-grade metamorphic areas. The dataset of mutually consistent thermodynamic properties of minerals gives a positive slope for the boundary between the pumpellyite–actinolite and prehnite–pumpellyite facies in P–T space. In the Sanbagawa belt in Japan, the mineral parageneses of hematite-bearing and -free basic schists, as well as pelitic schists have been well documented. The higher temperature limit of this facies is defined by the disappearance of the pumpellyite+epidote+actinolite+chlorite assemblage in hematite-free basic schists with X_Fe3+ of epidote around 0.20–0.25 and the appearance of epidote+actinolite+chlorite assemblage with X^Ep_Fe3+≤0.20. In hematite-bearing basic schists, there is a continuous change of paragenesis to higher grade, epidote–glaucophane or epidote–blueschist facies. In pelitic schists, the albite+lawsonite+chlorite assemblage does occur but only rarely, and its assemblage cannot be used to determine the regional thermal structure. The lower temperature equivalence of the pumpellyite–actinolite assemblage is not observed in the field. The Mikabu Greenstone complex and the northern margin of the Chichibu complex, which are located to the south of the Sanbagawa belt, are characterized by clinopyroxene+chlorite or lawsonite+actinolite assemblages, which are lower temperature assemblages than the pumpellyite+actinolite assemblage. These three metamorphic complexes belong to the same subduction-metamorphic complex. The pumpellyite–actinolite facies or subfacies can be useful to help reveal the field thermal structure of metamorphic complexes     

Study of temperature and precipitation variations in Italy based on surface instrumental observations

In this paper we present a study concerning the climatic behaviour of two principal observables, temperature and precipitation as obtained from the measurements carried out at 50 Italian meteorological stations, since 1961. Analyses of WMO Climate Normals (CliNo) from 1961 to 1990 have been performed dividing the 50 Italian stations in three different classes: mountain (11 stations), continental (17) and coastal areas (21).The comparison of the CliNo 1961–1990 with the trend of temperature and precipitation for the period 1991–2000 showed a sharp significant increase of summer temperatures over Italy starting from 1980. This phenomenon was particularly evident for mountain stations, where a significant temperature increase has been recorded also during the autumn. Moreover, the analysis of precipitation data permitted to point out that, starting from 1980, mountain stations have been affected by a significant increase of precipitation events during autumn and winter, while for the rest of the Italian territory a reduction of precipitations has been recorded during early spring.     

Impacts of Climatic Factors on Runoff Coefficients in Source Regions of the Huanghe River

Runoff coefficients of the source regions of the Huanghe River in 1956–2000 were analyzed in this paper. In the 1990s runoff of Tangnaihai Hydrologic Station of the Huanghe River experienced a serious decrease, which had at- tracted considerable attention. Climate changes have important impact on the water resources availability. From the view of water cycling, runoff coefficients are important indexes of water resources in a particular catchment. Kalinin baseflow separation technique was improved based on the characteristics of precipitation and streamflow. After the separation of runoff coefficient (R/P), baseflow coefficient (Br/P) and direct runoff coefficient (Dr/P) were estimated. Statistic analyses were applied to assessing the impact of precipitation and temperature on runoff coefficients (including Dr/P, Br/P and R/P). The results show that in the source regions of the Huanghe River, mean annual baseflow coefficient was higher than mean annual direct runoff coefficient. Annual runoff coefficients were in direct proportion to annual pre- cipitation and in inverse proportion to annual mean temperature. The decrease of runoff coefficients in the 1990s was closely related to the decrease in precipitation and increase in temperature in the same period. Over different sub-basins of the source regions of the Huanghe River, runoff coefficients responded differently to precipitation and temperature. In the area above Jimai Hydrologic Station where annual mean temperature is –3.9oC, temperature is the main factor in- fluencing the runoff coefficients. Runoff coefficients were in inverse relation to temperature, and precipitation had nearly no impact on runoff coefficients. In subbasin between Jimai and Maqu Hydrologic Station Dr/P was mainly affected by precipitation while R/P and Br/P were both significantly influenced by precipitation and temperature. In the area be-tween Maqu and Tangnaihai hydrologic stations all the three runoff coefficients increased with the rising of annual precipitation, while direct runoff coefficient was inversely proportional to temperature. In the source regions of the Huanghe River with the increase of average annual temperature, the impacts of temperature on runoff coefficients be-come insignificant.     

FY-4A GIIRS高时间分辨率温湿度廓线反演及其在台风中的应用

针对2020年第9号台风"美莎克"期间FY-4A 高光谱红外干涉式大气垂直探测仪GIIRS每15 min一次的目标区跟踪加密观测资料,用三维卷积神经网络算法反演的全天空大气温度、湿度廓线分析了台风处于生命史不同阶段时暖心结构和湿度场结构的演变特征。结果表明:卷积神经网络的深度机器学习算法可以用来反演全天空的三维大气温度和湿度垂直廓线,不光适用范围广(晴空和有云视场)、反演精度高,而且反演速度快。利用静止卫星平台高时间分辨率的特性,反演得到的温度、湿度廓线可以细致追踪台风处于发展、成熟和登陆等阶段时暖心结构和湿度场的时空演变特征。台风从发展阶段(热带风暴和强热带风暴)到成熟阶段至登陆消亡时,暖心首先出现在对流层中高层较薄的区域,随着台风强度的加强,深厚的暖心结构明显、强度增加,水平面积增大且垂直往下延伸。由于对流云中强上升气流的输送水汽正距平区逐渐上传至300 hPa,台风最强时密闭云区与四周下沉气流区比湿差高到8 K·kg^-1。暖心结构和高湿度中心随着台风登陆而逐渐消失。     

Influence of Seawater Temperature on Phytoplankton Growth in Jiaozhou Bay, China

The phytoplankton reproduction capacity (PRC), as a new concept regarding chlorophyll-a and primary production (PP) is described. PRC is different from PP, carbon assimilation number (CAN) or photosynthetic rate ( P^B ) . PRC quantifies phytoplankton growth with a special consideration of the effect of seawater temperature. Observation data in Jiaozhou Bay, Qingdao, China, collected from May 1991 to February 1994 were used to analyze the horizontal distribution and seasonal variation of the PRC in Jiaozhou Bay in order to determine the characteristics, dynamic cycles and trends of phytoplankton growth in Jiaozhou Bay; and to develop a corresponding dynamic model of seawater temperature vs. PRC. Simulation curves showed that seawater temperature has a dual function of limiting and enhancing PRC. PRC‘s periodicity and fluctuation are similar to those of the seawater temperature. Nutrient silicon in Jiaozhou Bay satisfies phytoplankton growth from June 7 to November 3. When nutrients N, P and Si satisfy the phytoplankton growth and solar irradiation is sufficient, the PRC would reflect the influence of seawater temperature on phytoplankton growth. Moreover, the result quantitatively explains the scenario of one-peak or two-peak phytoplankton reproduction in Jiaozhou Bay, and also quantitatively elucidates the internal mechanism of the one- or two-peak phytoplankton reproduction in the global marine areas.     

Effect of atmospheric pressure and temperature on entrapped gas content in peat

Entrapped biogenic gas in peat can greatly affect peatland biogeochemical and hydrological processes by altering volumetric water content, peat buoyancy, and ‘saturated’ hydraulic conductivity, and by generating over‐pressure zones. These over‐pressure zones further affect hydraulic gradients which influence water and nutrient flow direction and rate. The dynamics of entrapped gas are of global interest because the loss of this gas to the atmosphere via ebullition (bubbling) is likely the dominant transport mechanism of methane (CH₄) to the atmosphere from peatlands, which are the largest natural terrestrial source per annum of atmospheric CH₄. We investigated the relationship between atmospheric pressure and temperature on volumetric gas content (VGC) and CH₄ ebullition using a laboratory peat core incubation experiment. Peat cores were incubated at three temperatures (one core at 4 °C, three cores at 11 °C, and one core at 20 °C) in sealed PVC cylinders, instrumented to measure VGC, pore‐water CH₄ concentrations, and ebullition (volume and CH₄ concentrations). Ebullition events primarily occurred (71% of the time) during periods of falling atmospheric pressure. The duration of the drop in atmospheric pressure had a larger control on ebullition volume than the magnitude of the drop. VGC in the 20 °C core increased from the onset of the experiment and reached a fluctuating but time‐averaged constant level between experiment day 30 and 115. The change in VGC was low for the 11 °C cores for the initial period of the experiment but showed large increases when the growth chamber temperature increased to 20 °C due to a malfunction. The core maintained at 4 °C showed only a small increase in entrapped gas content throughout the experiment. The 20 °C core showed the largest increase in VGC. The increases in VGC occurred despite pore‐water concentrations of CH₄ being below the equilibrium solubility level. Copyright © 2009 John Wiley & Sons, Ltd.     

Data collection methodology for dynamic temperature model testing and corroboration

This article describes a data collection approach for determining the significance of individual heat fluxes within streams with an emphasis on testing (i.e. identification of possible missing heat fluxes), development, calibration and corroboration of a dynamic temperature model. The basis for developing this approach was a preliminary temperature modelling effort on the Virgin River in southwestern Utah during a low‐flow period that suggested important components of the energy balance might be missing in the original standard surface‐flux temperature model. Possible missing heat fluxes were identified as bed conduction, hyporheic exchange, dead zone warming and exchange and poor representation of the amount of solar radiation entering the water column. To identify and estimate the relative importance of the missing components, a comprehensive data collection effort was developed and implemented. In particular, a method for measuring shortwave radiation behaviour in the water column and an in situ method for separating out bed conduction and hyporheic influences were established. The resulting data and subsequent modelling effort indicate that hyporheic and dead zone heat fluxes are important, whereas solar radiation reflection at the water surface was found to be insignificant. Although bed conduction can be significant in certain rivers, it was found to have little effect on the overall heat budget for this section of the Virgin River. Copyright © 2009 John Wiley & Sons, Ltd.     

EXPERIMENTAL STUDY ON SOIL MOISTURE USING DUAL-FREQUENCY MICROWAVE RADIOMETER

1INTRODUCTIONSoil is the basis of human's living. Soil moisture plays asignificant role in studying the matter and energy ex-changes in global hydrology sphere. The evaporation ofsoil moisture has an influence on the water vapor cycle.Meanwhile soil moisture is also one of the firsthandmeasurable parameters in crop yield estimation and wa-ter resources management (JACKSON et al., 1993). Theinfluence of the interaction of land and atmosphere onsoil moisture can bring about anomalous cli…     

Shock-induced temperatures of MgO

Shock-compressed MgO radiates thermally at temperatures between 2900 and 3700 K in the 170–200 GPa pressure range. A simple energy-transport model of the shocked-MgO-targets distinguishes between different shock-induced radiation sources in these targets and provides estimates of spectral absorption-coefficients, α _ΛMgO, for shocked MgO (e.g. at 203 GPa, α _ΛMgO˜ 630, 7500, 4200 and 3800 m⁻¹, at 450, 600, 750 and 900 nm, respectively). The experimentally inferred temperatures of the shock-compressed states of MgO are consistent with temperatures calculated for MgO assuming that (1) it deforms as an elastic fluid, (2) has a Dulong-Petit value for specific heat at constant volume in its shocked state, and (3) undergoes no phase transformation below 200 GPa.     

Impacts of salinity parameterizations on temperature simulation over and in a hypersaline lake

In this paper,we introduced parameterizations of the salinity effects(on heat capacity,thermal conductivity,freezing point and saturated vapor pressure) in a lake scheme integrated in the Weather Research and Forecasting model coupled with the Community Land Model(WRF-CLM). This was done to improve temperature simulation over and in a saline lake and to test the contributions of salinity effects on various water properties via sensitivity experiments. The modified lake scheme consists of the lake module in the CLM model,which is the land component of the WRF-CLM model. The Great Salt Lake(GSL) in the USA was selected as the study area. The simulation was performed from September 3,2001 to September 30,2002. Our results show that the modif ied WRF-CLM model that includes the lake scheme considering salinity effects can reasonably simulate temperature over and in the GSL. This model had much greater accuracy than neglecting salinity effects,particularly in a very cold event when that effect alters the freezing point. The salinity effect on saturated vapor pressure can reduce latent heat flux over the lake and make it slightly warmer. The salinity effect on heat capacity can also make lake temperature prone to changes. However,the salinity effect on thermal conductivity was found insignificant in our simulations.