Tephrochronology and tephrostratigraphy of two Pleistocene continental fossiliferous successions from central Italy

The stratigraphical context of two Middle Pleistocene fossiliferous palaeosols from Central Italy (Abruzzo and Tuscany) have been studied. Small mammals and molluscs occur in both palaeosols, which are covered by tephra layers that were analysed using an interdisciplinary approach. Application of fission‐track dating to apatites separated from the Case Picconetto tephra (Pescara, Abruzzo), yielded an age of 0.48 ± 0.04 Ma, indistinguishable from those previously determined for the Campani Quarry (Lower Valdarno, Tuscany) (0.46 ± 0.05 Ma and 0.48 ± 0.05 Ma). Geochemical and petrographic investigations indicate that these tephra originated from different volcanoes, the Alban Hills Volcanic Complex and the Vico Volcano (Latium) respectively. Small mammal and mollusc assemblages indicate different palaeoclimatic and palaeoenvironmental conditions for the Case Picconetto and Campani Quarry palaeosols. Warm and humid conditions can be inferred for the Campani Quarry site, whereas open and cold conditions can be inferred for Case Picconetto. On the basis of faunal data, fission‐track dates and attribution of tephra to specific volcanic eruptions, we suggest a correlation of these faunas with marine oxygen isotope stage 14 (Case Picconetto) and with marine oxygen isotope stage 11 (Campani Quarry), respectively. Copyright © 2003 John Wiley & Sons, Ltd.     

Mezen Bay—a key area for understanding Weichselian glaciations in northern Russia

Sediment successions in coastal cliffs around Mezen Bay, southeastern White Sea, record an unusually detailed history of former glaciations, interstadial marine and fluvial events from the Weichselian. A regional glaciation model for the Weichselian is based on new data from the Mezen Bay area and previously published data from adjacent areas. Following the Mikulinian (Eemian) interglacial a shelf‐centred glaciation in the Kara Sea is reflected in proglacial conditions at 100–90 ka. A local ice‐cap over the Timan ridge existed between 75 and 65 ka. Renewed glaciation in the Kara Sea spread southwestwards around 60 ka only, interrupted by a marine inundation, before it advanced to its maximum position at about 55–50 ka. After a prolonged ice‐free period, the Scandinavian ice‐sheet invaded the area from the west and terminated east of Mezen Bay about 17 ka. The previously published evidence of a large ice‐dammed lake in the central Arkhangelsk region, Lake Komi, finds no support in this study. Copyright © 2003 John Wiley & Sons, Ltd.     

Palaeotemperature reconstructions of the European permafrost zone during marine oxygen isotope Stage 3 compared with climate model results

A palaeotemperature reconstruction based on periglacial phenomena in Europe north of approximately 51 °N, is compared with high‐resolution regional climate model simulations of the marine oxygen isotope Stage 3 (Stage 3) palaeoclimate. The experiments represent Stage 3 warm (interstadial), Stage 3 cold (stadial) and Last Glacial Maximum climatic conditions. The palaeotemperature reconstruction deviates considerably for the Stage 3 cold climate experiments, with mismatches up to 11 °C for the mean annual air temperature and up to 15 °C for the winter temperature. However, in this reconstruction various factors linking climate and permafrost have not been taken into account. In particular a relatively thin snow cover and high climatic variability of the glacial climate could have influenced temperature limits for ice‐wedge growth. Based on modelling the 0 °C mean annual ground temperature proves to be an appropriate upper temperature limit. Using this limit, mismatches with the Stage 3 cold climate experiments have been reduced but still remain. We therefore assume that the Stage 3 ice wedges were generated during short (decadal time‐scale) intervals of extreme cold climate, below the mean temperatures indicated by the Stage 3 cold climate model simulations. Copyright © 2003 John Wiley & Sons, Ltd.     

Marine hazards in coastal areas and human action against them—A case study of the Changjiang River estuaries and Qiantang River

China's eastern coastal area marine hazards (storm surge, erosion and deposition by tidal currents and seawater intrusion) and the history, present situation, experiences and problems of inhabitants in their fight against marine hazards are discussed in this paper, which also suggests counter-measures against, and scientific and rational management of, coastal area marine hazards in order to protect the coastal and estuarine ecosystems.     

海洋纤维增强热塑性立管极限承载拉力预测方法

海洋新型纤维增强热塑性立管因其可盘卷、耐腐蚀、耐疲劳和轻质化等优点,在深水油气开发中应用前景十分广阔。热塑性立管具有复合材料的各向异性、受力耦合效应及复杂的本构关系,且承受浮体运动和复杂海洋环境载荷,其失效模式尚未明确。针对轴对称载荷作用下纤维增强热塑性立管极限承载力问题,进行热塑性管稳态热传导和热应力的理论推导,求解了稳态温度和应力分布,首次给出了在任意温度载荷作用下管体径向位移的解析解,并直接求解其径向、轴向、环向和剪切应力。采用各向同性层Von Mises和各向异性层最大应力（Max Stress）准则或Tsai-Hill准则判定热塑性管的失效,基于应力分布、失效准则和二分法计算了热塑性管的极限载荷。温度载荷、纤维铺设角度和径厚比对管道的应力分布影响显著。不同温度载荷会改变失效指数沿径向的变化趋势,增大轴向拉力将增大热塑性管的失效指数,选用不同的失效准则在管体失效判定上存在一定的差异。热塑性管温度越低、纤维铺设角越小及径厚比越大,管道对轴向拉伸载荷的承载能力越强。     

全球气候变化下南海诸岛保护优先区识别分析

全球变化下,珊瑚礁保护区是保护生物多样性、增强珊瑚礁对气候变暖抵抗力的有效方式,而维持珊瑚礁弹性是其核心内容。针对珊瑚礁最具有威胁性的热压力因子,基于南海1982—2009年卫星观测海表面温度（SST）数据和CMIP5加拿大地球系统模式CanESM2模型预估的2006—2100年南海SST数据构建热压力强度模型,从维持珊瑚礁弹性的角度识别IPCC RCP 4.5和RCP 8.5情景下南海诸岛保护优先区。结果表明：RCP 4.5和RCP 8.5情景下13%左右的南海诸岛珊瑚礁识别为保护优先区。根据热压力强度与珊瑚抵抗力及避难所关系,西沙群岛七连屿和晋卿岛近年观测与未来预估的热压力强度均比较低,在保障其服务功能的基础上建议实施完全保护;东沙群岛东沙环礁和中沙环礁排洪滩近年观测急性热压力强度较高但未来预估热压力强度较低,建议实施50%禁止利用保护;中沙群岛黄岩岛近年观测和未来预估的急性热压力强度均比较低,建议实施50%多用途保护。南沙群岛有14%左右的珊瑚礁识别为保护优先区,根据其热压力强度可实施30%~100%禁止利用保护或30%~50%多用途保护。RCP 4.5和RCP 8.5情景下的南海诸岛保护优先区及保护对策,可为维持珊瑚礁生态弹性及应对全球气候变化提供重要的参考价值。     

MARINE HAZARDS IN COASTAL AREAS AND HUMAN ACTION AGAINST THEM-A CASE STUDY OF THE CHANGJIANG RIVER ESTUARIES AND QIANTANG RIVER

INTRODUCTIONMarinehedsresultinginenomouslossestousuallyPOpulousandeconondcallyde-veloPedlowandcoastalandestUdrineregi0nsareforngseriousattenti0n.msarticlediscussesP0ssiblepreventivemeasaresagainstInariflehazaIdsbasedonacasestUdyoftheestUedesoftheChanaiiangffiverandQiantanffiver-ThesetwoareasoftheChanaiiangDeltaareboicalofc0astalregionsfreqUenilysufferingfromdrinehazanls,andarethemostsociallyandeconondcallydeveloPedregionsinChina.Theirinhabitantshaveahist0-ryofmorethanathouSandyeare0…     

长山群岛海洋农牧化海域环境分区研究

海洋农牧化就是要在海域中,对贝、藻、鱼、虾类生物资源进行人工养殖、增殖以提高资源量。从捕天然生物资源转变成为以捕增养殖资源为主的生产方式。通过对长山群岛海域发展海洋农牧化的海域环境以及海水的理化因子等进行评价,并对该海域海水增养殖的发展状况、养殖品种及构成变化特征进行了分析,最后,应用主成份-聚类分析方法,将长山群岛海域环境划分为三个海洋农牧化区域,为因海制宜、合理布局海水增养殖生产提供科学依据。     

Design and implementation of a 3D ocean virtual reality and visualization engine

In this study,a 3D virtual reality and visualization engine for rendering the ocean,named VV-Ocean,is designed for marine applications.The design goals of VV-Ocean aim at high fidelity simulation of ocean environment,visualization of massive and multidimensional marine data,and imitation of marine lives.VV-Ocean is composed of five modules,i.e.memory management module,resources management module,scene management module,rendering process management module and interaction management module.There are three core functions in VV-Ocean:reconstructing vivid virtual ocean scenes,visualizing real data dynamically in real time,imitating and simulating marine lives intuitively.Based on VV-Ocean,we establish a sea-land integration platform which can reproduce drifting and diffusion processes of oil spilling from sea bottom to surface.Environment factors such as ocean current and wind field have been considered in this simulation.On this platform oil spilling process can be abstracted as movements of abundant oil particles.The result shows that oil particles blend with water well and the platform meets the requirement for real-time and interactive rendering.VV-Ocean can be widely used in ocean applications such as demonstrating marine operations,facilitating maritime communications,developing ocean games,reducing marine hazards,forecasting the weather over oceans,serving marine tourism,and so on.Finally,further technological improvements of VV-Ocean are discussed.