A mixing-length model for predicting vertical velocity distribution in flows through emergent vegetation

Abstract

The vertical profiles of streamwise velocities are computed on flood plains vegetated with trees. The calculations were made based on a newly developed one-dimensional model, taking into account the relevant forces acting on the volumetric element surrounding the considered vegetation elements. A modified mixing length concept was used in the model. An important by-product of the model is the method for evaluating the friction velocities, and consequently bed shear stresses, in a vegetated channel. The model results were compared with the relevant experimental results obtained in a laboratory flume in which flood plains were covered by simulated vegetation.     

Study of bond stress–slip relationship and radial dilation in prestressed concrete

This paper presents two test procedures for evaluating the bond stress–slip and the slip–radial dilation relationships when the prestressing force is transmitted by releasing the steel (wire or strand) in precast prestressed elements. The bond stress–slip relationship is obtained with short length specimens, to guarantee uniform bond stress, for three depths of the wire indentation (shallow, medium and deep). An analytical model for bond stress–slip relationship is proposed and compared with the experimental results. The model is also compared with the experimental results of other researchers. Since numerical models for studying bond‐splitting problems in prestressed concrete require experimental data about dilatancy angle (radial dilation), a test procedure is proposed to evaluate these parameters. The obtained values of the radial dilation are compared with the prior estimated by numerical modelling and good agreement is reached. Copyright © 2012 John Wiley & Sons, Ltd.     

A numerical scheme for calculating stresses and strain rates in glaciers

The stress and strain-rate fields in a glacier or other type of rock with known rheological properties can be calculated by using a numerical solution technique. Calculations are based on force-balance equations and the constitutive relation for polar ice, and do not involve any mathematical approximations. The geometry is prescribed. Basal velocities also are prescribed, either by specifying their values or by relying on a sliding relation. All other quantities are determined numerically.     

唐山震区深反射剖面分析

为了进一步研究唐山地区深部地壳构造与唐山大地震孕育及发生的关系,国家地震局地球物理研究所在石油部物探局的协助下,于1985年1月在唐山震区完成了64km长的深反射剖面野外观测,获得了高分辨率的整个地壳结构的详细资料。分析结果表明,唐山震区内深度500m以上的沉积层十分破碎;结晶基底为前震旦纪地层,埋深2-7km不等,覆盖地层倾斜,且断层发育,其中陡河断裂为正断层,延深至6-7km,推断该断层为1976年唐山发震的重要构造之一。测线上大约21km深处普遍存在一反射层;莫霍面深度在31-32km左右,与该地区折射剖面得到的结果相当一致。     

三维地震勘探数据处理的问题及其解决方法

三维地震勘探在十年内取得了显著的地质效果和经济效益。三维地震数据处理技术也得到了迅速的发展。但是,与二维相比,三维地震数据处理技术有许多不完善之处。本文对其中几个主要问题进行分析并提出解决方法。这些问题是三维叠加速度分析、三维静校正和叠前三维偏移等处理方法。     

长江流域旱涝典型年大气水汽输送

利用我国125个探空站一日两次自地面至100hpa共11个层次上的观测资料,对长江流域典型夏涝年(1980年)和夏旱年(1985年)我国大气中水汽总输送场、涡动输送场及散度场进行了计算分析。结果表明:当水汽总输送场从西北、西南和东南三支气流携带的水汽交汇于长江流域,且整个水汽输送场稳定持久,则在水汽辐合带附近导致大量降水,形成洪涝;反之,当三支气流微弱不稳定,不能形成水汽辐合带条件,则形成干旱。涡动输送亦反映出类似的特征。稳定且强盛的西南气流水汽输送是形成降水的主要条件和原因。     

Simulation of flow over pool-riffle topography: A consideration of the velocity reversal hypothesis

Computer flow simulations using the HEC-2 step-backwater routine are used to demonstrate the effect of systematically varying river channel width, riffle spacing and channel roughness on the shear velocity, section-mean velocity and energy slope in fixed-bed pool-riffle sequences. Initial scaling is obtained by utilizing published information on hydraulic parameters within reaches of the River Severn. Subsequently this restriction is relaxed and the effect of varying parameter combinations within realistic limits is explored. The purpose of this exercise is to isolate those scenarios which may preclude or promote the occurrence of a competence ‘reversal’, such that pools scour at high flow whilst deposition occurs on riffles. It is concluded that rivers in which pools are hydraulically rougher than riffles are likely to demonstrate a competence reversal. For prescribed conditions, the critical discharge at which a reversal occurs is a negative function of riffle spacing and riffle width relative to pool width. Downstream variation in hydraulic roughness also has implications for the phase relationship of shear velocity maxima and minima in relation to the extremes in pool-riffle topography.