速度传感反馈地震计的动态范围上限

在开环参数一定的条件下,速度传感反馈地震计中的环路滤波是影响地震计主要技术指标的关键环节之一.本文探讨了一阶极点高通、一阶极点低通、一阶零点高通、双一阶和零阶环路滤波在扩展地震计动态范围上限方面的优缺点.研究指出,对于用闭环反馈直接生成主导二阶极点的速度传感反馈地震计,一阶零点高通环路滤波的优点较多;若允许在环外生成主导二阶极点,则零阶环路滤波也不失为一个较好的方案.     

Estimation of peak relative velocity and peak absolute acceleration of linear SDOF systems

In the seismic analysis and design of structures, the true velocity and absolute acceleration are usually approximated by their corresponding pseudo-values. This approach is simple and works well for structures with small damping (say, less than 15%). When the damping of a structure is enhanced for the purpose of response reduction, it may result in large analysis and design errors. Based on theory of random vibration and the established mechanism of seismic response spectra analysis, a method is developed (1) to predict the relative velocity spectra with any damping ratio level directly from the 5% standard pseudo-acceleration spectrum; and (2) to estimate the peak absolute acceleration. The accuracy of both is validated by using two selected ensembles of ground motion records.     

基于小波分析的场地波速测量方法

在场地波速测量中,由于噪声等因素的影响很难准确识别P、S波的初至时刻,致使波速结果存在很大的误差。本文给出了一种基于小波变换的波速测量的新方法。该方法利用波动信号的小波变换与弹性波群速度的关系准确识别弹性波初至时刻。弹性波小波变换的峰值时刻代表着以群速度传播的弹性波的初至时刻,使P波、S波的初至时刻的确定具有明确的物理意义,波速的结果准确、可靠、稳定。此外,波动信号的小波多尺度分析还可以确定地层中传播的弹性波的频散特性。最后,该方法在场地波速测量的实测信号的应用表明该方法可准确确定P、S波速。     

折射层析成像法测试隧道围岩松动圈

通过应用折射层析成像法在乌鞘岭特长隧道中的测试,说明该方法对于横向速度变化不均一,过渡带速度渐变的地质情况具有分辨率高、图像直观、易于解释,适合对隧道围岩松动圈的测试.     

探地雷达宽角反射图形拟合方法

探地雷达共中心点(CMP)法仅用于局部速度测试,为使用宽角反射法进行剖面探测,可固定一个雷达天线而将另一个天线沿测线移动,从而获取整个地质界面的反射信号.本文提出宽角反射剖面探测方法,基于平直岩层界面导出其反射信号的关系式,并开发出解释软件,可精确计算岩层几何参数和层速度,从而进行地质分层.     

不同检测方法对混凝土波速的影响研究

为建立超声波法和低应变反射波法检测所得混凝土基桩波速的相互转换关系,本文给出了标准线性固体模型下粘弹性介质的三维和一维纵波速度之比及其实用简化公式,并且通过实验得出,混凝土构件的超声波速与1.054倍低应变动测波速之比处于1.03~1.12,具体数值会随着混凝土龄期、弹性模量和强度等级的增加而有所减小。     

横向沙丘背风侧沙粒风蚀起动的风洞模拟

通过风洞实验,探讨了横向沙丘背风侧“二次流”的沉积学和形态-动力学意义。在不同迎风坡坡度的横向沙丘模型背风侧,我们观测了不同位置沙粒的起动风速以及在临界状态下沙粒的运动特征。结果表明,沙丘背风侧的颗粒起动风速不仅与其距沙丘顶部的距离有关,也与沙丘迎风坡坡度有密切关系。根据沙丘背风侧颗粒运动特征,可以将其划分为向后运动区域、晃动或摆动区域以及向前运动区域,产生这一现象的原因是在沙丘背风坡气流分离、反向涡和气流重新辐合共同作用的结果。在所有的观测结果中,迎风坡坡度为15°的沙丘具有最大的沙粒起动风速和最远的气流重新辐合距离,其原因尚需进一步研究。     

Drained cavity expansions in soils of finite radial extent subjected to two boundary conditions

The problem of drained cavity expansion in soils of finite radial extent is investigated. Cylindrical and spherical cavities expanded from zero radius subjected to either constant stress or zero displacement at the finite boundary are considered. The generalised analytical solution procedure presented enables more advanced constitutive models to be implemented than have been possible in previous studies. Results generated for Sydney quartz sand highlight substantial differences between cavity limit pressures for the two boundary conditions and for boundaries of finite and infinite radial extent. This is of significance in accounting for boundary effects when interpreting cone penetration tests conducted in calibration chambers. Copyright © 2011 John Wiley & Sons, Ltd.     

Analysis of Manning coefficient for small‐depth flows on vegetated beds

The limitations of Manning's formula are analysed when it is in extreme conditions, and more specifically with small‐depth flows on natural‐vegetation beds. A thorough analysis is made of research carried out on macro‐rough beds, placing particular emphasis on vegetated beds. Research carried out to date on the roughness of vegetated beds and macro‐roughness is commented on, including that carried out at the Laboratory of Hydraulics and Hydrology of the Forestry Engineering Faculty (Polytechnic University of Madrid). The work was done in two phases, the first in a laboratory channel with artificial vegetation and the second in natural beds. The results of the experimental research allow the development of a new approximate method of determining Manning coefficient according to the Froude number. This method may be applied in extreme conditions, both in small depths and steep slopes. It was proved that the Manning coefficient depends not only on roughness height, but also on depth and slope values; thus, it is advisable to choose the appropriate method for its calculation. Copyright © 2005 John Wiley & Sons, Ltd.     

Modelling combined open channel flow by artificial neural networks

Combined open channel flow is encountered in many hydraulic engineering structures and processes, such as irrigation ditches and wastewater treatment facilities. Extensive experimental studies have conducted to investigate combined flow characteristics. Nevertheless, there is no simple relationship that can fully describe the velocity profiles in a turbulent flow. The artificial neural network (ANN) has great computational capability for solving various complex problems, such as function approximation. The main objective of this study is to evaluate the applicability of the ANN for simulating velocity profiles, velocity contours and estimating the discharges accordingly. The velocity profiles measured by an acoustic doppler velocimeter in the open channel of the Chihtan purification plant, Taipei, with different discharges at fixed measuring section and different depths are presented. The total number of data sets is 640 and the data sets are split into two subsets, i.e. training and validation sets. The backpropagation algorithm is used to construct the neural network. The results demonstrate that the velocity profiles can be modelled by the ANN, and the ANN constructed can nicely fit the velocity profiles and can precisely predict the discharges for the conditions investigated. Copyright © 2005 John Wiley & Sons, Ltd.