Gravity anomalies and associated tectonic features over the Indian Peninsular Shield and adjoining ocean basins

A combined gravity map over the Indian Peninsular Shield (IPS) and adjoining oceans brings out well the inter-relationships between the older tectonic features of the continent and the adjoining younger oceanic features. The NW–SE, NE–SW and N–S Precambrian trends of the IPS are reflected in the structural trends of the Arabian Sea and the Bay of Bengal suggesting their probable reactivation. The Simple Bouguer anomaly map shows consistent increase in gravity value from the continent to the deep ocean basins, which is attributed to isostatic compensation due to variations in the crustal thickness. A crustal density model computed along a profile across this region suggests a thick crust of 35–40 km under the continent, which reduces to 22/20–24 km under the Bay of Bengal with thick sediments of 8–10 km underlain by crustal layers of density 2720 and 2900/2840 kg/m³. Large crustal thickness and trends of the gravity anomalies may suggest a transitional crust in the Bay of Bengal up to 150–200 km from the east coast. The crustal thickness under the Laxmi ridge and east of it in the Arabian Sea is 20 and 14 km, respectively, with 5–6 km thick Tertiary and Mesozoic sediments separated by a thin layer of Deccan Trap. Crustal layers of densities 2750 and 2950 kg/m³ underlie sediments. The crustal density model in this part of the Arabian Sea (east of Laxmi ridge) and the structural trends similar to the Indian Peninsular Shield suggest a continent–ocean transitional crust (COTC). The COTC may represent down dropped and submerged parts of the Indian crust evolved at the time of break-up along the west coast of India and passage of Reunion hotspot over India during late Cretaceous. The crustal model under this part also shows an underplated lower crust and a low density upper mantle, extending over the continent across the west coast of India, which appears to be related to the Deccan volcanism. The crustal thickness under the western Arabian Sea (west of the Laxmi ridge) reduces to 8–9 km with crustal layers of densities 2650 and 2870 kg/m³ representing an oceanic crust.     

Late-Stage Ductile Deformation in Xiongdian-Suhe HP Metamorphic Unit, North-Western Dabie Shan, Central China

New structural and petrological data unveil a very complicated ductile deformation history of the Xiongdian-Suhe HP metamorphic unit, north-western Dabie Shun, central China. The finegrained symplectic amphibolite-facies assemblage and coronal structure enveloping eclogite-facies garnet,omphacite and phengite etc., representing strain-free decompression and retrogressive metamorphism,are considered as the main criteria to distinguish between the early-stage deformation under HP metamorphic conditions related to the continental deep subduction and collision, and the late-stage deformation under amphibolite to greenschist-facies conditions occurred in the post-eclogite exhumation processes.Two late-stages of widely developed, sequential ductile deformations D3 and D4, are recognized on the basis of penetrative fabrics and mineral aggregates in the Xiongdian-Suhe HP metamorphic unit, which shows clear, regionally, consistent overprinting relationships. D3 fabrics are best preserved in the Suhe tract of low post-D3 deformation intensity and characterized by steeply dipping layered mylonitic amphibolites associated with doubly vergent folds. They are attributed to a phase of tectonism linked to the initial exhumation of the HP rocks and involved crustal shortening with the development of upright structures and the widespread emplacement of garnet-bearing granites and felsic dikes. D4 structures are attributed to the main episode of ductile extension (D^24) with a gently dipping foliation to the north and common intrafolial, recumbent folds in the Xiongdian tract, followed by normal sense top-to-the northductile shearing (D^24) along an important tectonic boundary, the so-called Majiawa-Hexiwan fault (MHF), the westward continuation of the Balifan-Mozitan-Xiaotian fault (BMXF) of the northern Dabie Shan. It is indicated that the two stages of ductile deformation observed in the Xiongdian-Suhe HP metamorphic unit, reflecting the post-eclogite compressional or extrusion wedge formation, the subhorizontal ductile extension and crustal thinning as well as the top-to-the north shearing along the high-angle ductile shear zones responsible for exhumation of the HP unit as a coherent slab, are consistent with those recognized in the Dabie-Sulu UHP and HP metamorphic belts, suggesting that they were closely associated in time and space. The Xiongdian-Suhe HP metamorphic unit thus forms part of the Triassic(250-230 Ma) collision orogenic belt, and can not connect with the South Altun-North Qaidam-North Qinline UHP metamorphic belt formed durin~ the Early Paleozoic (500-400Ma).     

正交法在注浆材料优化设计中的应用

应用正交试验设计法，对粘土固化浆液的配比进行了优化，得到了最佳配比，并将其应用于洛湛铁路益娄段岩溶路基的注浆加固，收到了很好的整治效果。     

川西亚高山三个森林群落的湿林冠蒸发速率

于3个假说和林冠上方2m处的气象变量，采用Penman-Monteith组合模型估算了一个生长季节内川西亚高山林区分别以云杉(SF)、冷杉(FF)和白桦(BF)为优势树种的3个林分的湿林冠蒸发速率(Er)。研究结果表明，SF、FF和BF的湿林冠蒸发量(E)分别为44．51mm、88．51mm和57．8mm，分别占总降雨量的9．2％、16．6％和10．2％。与SF和BF相比，FF具有最高的月平均Er和蒸发比例。SF、FF和BF的平均Er分别为0．097mm／h(变化范围：0．028-0．487mm／h)、0．242mm／h(变化范围：0．068～0．711mm／h)和0．149mm／h(0．060～0．576mm／h)。最高和最低的月平均Er分别在6月(SF、FF和BF分别为0．120mm／h、0．317mm／h和0．169mm／h)和10月(SF、FF和BF分别为0．083mm／h、0．187mm／h和0．101mm／h)。8：00至16：00期间的平均点Er显著高于0：00至8：00以及16：00至0：00期间的平均Er。Er显著的日变化和月变化主要归因于林冠上方的太阳辐射、空气温度和相对湿度的变化。     

2003年广西最大一次锋面暴雨天气过程特征分析

本文利用常规观测资料和物理量资料,对2003年6月26～28日广西全区性范围暴雨天气过程进行诊断分析,指出副热带高压逐渐加强西伸与弱冷空气在广西维持对峙是暴雨产生的主要原因;物理量和云图分析表明,暴雨发生前广西上空有深厚的不稳定层结存在,造成本次的强降水是对流层中低层暖湿空气被地面弱冷空气抬升的结果。     

洛川黄土剖面中矿物固定态铵的分布

对洛川黄土中的固定铵进行了初步分析。结果表明,在所测定的黄土古土壤层中,固定铵态氮含量在130-1之间变化。黄土中的固定铵态氮含量明显低于古土壤。13万a以来洛川黄土剖面中固定铵的分布呈～210现三次大的低高值的振荡特征,即末次间冰期S1古土壤中固定铵态氮含量最高,其次为冰后期的S0古土壤层,末次冰期形成的马兰黄土中固定铵态氮含量最低;在马兰黄土中同样体现出三次小的低高值的波动特征。黄土与μm组分的分布具有相似性,这些特征反映了洛川黄土中固定铵态氮的含量变化与气互层的古土壤中固定态铵的分布与黄土高原区气候的冷暖变化有较好的一致性,并且13万a以来洛川黄土剖面中固定铵的分布与磁化率和<2候条件有紧密的联系,揭示了黄土中固定铵的变化在一定程度上能指示黄土高原区古气候的演变。     

A GIS Analysis to Evaluate Areas Suitable for Crushed Stone Aggregate Quarries in New England,USA

Aggregate is a low unit-value mineral commodity. Costs to move aggregate from the mine site to the point of use is a large fraction of the resource cost to users. Production sites for aggregate occur where suitable source materials exist and where transportation and market conditions are favorable. The increasing demand for aggregate and the difficulty of developing and permitting new sites and of renewal of permits on existing sites of aggregate production indicates that aggregate will be supplied from sources yet to be developed or delineated in many areas. Site development and permitting for aggregate production is difficult because many land management plans and zoning actions fail to anticipate prospective source areas for aggregate in a way that is consistent with both the source rock quality and the transportation and socioeconomic factors that define the economic viability of the industry. Spatial analysis provides a method to integrate both geology and economic (transportation and marketplace) parameters in a regional model. Weights of evidence (WofE) analysis has been used to measure the spatial correlation of geologic map, transportation network, and population data with current production sites for crushed stone aggregate in the New England region of the northeastern United States. Weighted logistic regression (WLR) is used with the WofE results to rank areas in terms of their relative suitability for production of crushed stone. Spatial analysis indicates that 85% of the 106 crushed stone aggregate quarries in New England are sited within 1.6 km (1 mile) of either a principal highway or rail line in the region. Seventy-eight percent of crushed stone aggregate quarries are sited in census tracts with population densities exceeding 100 people/mile². These relations illustrate the importance of proximity to both transportation corridors and developing areas where aggregate is predominately used. Only one active crushed stone quarry is located in a census tract with a population density less than 15 people/mile², reflecting the lack of sufficient market demand in many rural areas to develop an operation there. However, since 1990, almost all new quarries have been developed in census tracts with population densities less than 200 people/mile², indicating the difficulty of permitting new quarry sites in highly populated areas. Crushed stone aggregate is produced predominately from three hard rock types that are distributed widely in New England; 28% of sites use granitic rock, 25% use carbonate rocks, and 25% use mafic rock types that are categorized as trap rock by the aggregate industry. The other crushed stone aggregate sources include a variety of fine-grained metamorphic rock types. Carbonate rocks and Jurassic basalt (the primary trap rock source) are the most prevalent source rocks on an area-weighted basis. Spatial analysis can be used on a regional scale to rank areas by their relative suitabilityfor crushed stone aggregate production based on geology, transportation, and population parameters. The results of this regional analysis can identify areas for more detailed evaluation. As transportation or population features change, the model can be revised easily to reflect these changes.     

南极冰貌卫星影像条带噪声的剔除

本文在简要叙述条带噪声形成原因的基础上 ,针对南极地区的ASTER 1A的可见光影像中出现的条带噪声的现象 ,通过设计了基于切比雪夫窗、凯瑟窗的FIR滤波器和约束最小二乘FIR滤波器对其条带噪声进行剔除 ,这两种滤波器能够尽可能地剔除条带 ,同时使影像的灰度分布发生最小畸变。并通过与其他方法 (例如 :低通滤波 ,直方图匹配等 )比较 ,说明这两种滤波的方法优于其他的方法     

建筑物沉降规律的综合时序分析

建筑物的沉降监测数据序列具有趋势变化和随机变化的特点，本文针对两种变化项的特点分别建立相应的数学模型，再将其组合起来建立综合数学模型，从总体上把握沉降数据序列的变化规律。实例计算分析表明，此方法具有较高的拟合精度和预测能力，具有一定的应用参考价值。     

基于J2EE的移动定位服务研究

阐述了基于J2EE的移动定位服务 (MLS)的体系结构 ,介绍了适于MLS的GIS应用服务器和信息设备地图可视化表达的关键技术 ,给出了GeoSurf的WAP和J2ME的两种解决方案 ,并阐述了其应用前景