Distribution Patterns of Pentacyclic TriterpenoidHydrocarbons in Low-Mature Source Rocksfrom Eastern China

Four typical distribution patterns of pentacyclic triterpenoid hydrocarbons (types A-D) are distinguished in the low-mature source rocks from eastern China. Type A has a relatively high content of pentacyclic triterpenes. It exists in immature sediments and the distribution and abundance of triterpenes vary with the maturity of the sediments. An unknown C30 triterpene (UCT2) has also been detected in very shallow sediments. This compound is very unstable and disappears rapidly with the increase of depth. Type B is characterized by a relatively high amount of 17α(H), 21β(H)-30-homohopane. This kind of distribution pattern is common in coals and terrestrial sediments of low maturity. Type C has a relatively high content of diahopane and neohopane series. The analysis shows that this distribution pattern may have an indirect relationship with the input of higher plants despite its microbial source. There are C30-unconfirmed triterpane (UCT2) and a relatively high content of C35 hopane in type D. The dist     

基于热流固耦合的增强型地热有机朗肯循环发电系统性能分析

本文建立了耦合井筒、热储、有机朗肯循环发电系统的详细数学模型, 包括三维非稳态热流固耦合模型和有机朗肯循环发电系统热动力学模型, 参考青海省共和县恰卜恰干热岩体地热地质特征, 包括压裂储层、围岩、裂隙、井筒等特征参数, 研究了注入流量、注入温度和井间距对系统净输出功、年均净输出功和热效率的影响规律。结果表明: 在一定的注入流量、注入温度和净间距下, 随着时间的推移, 岩石孔隙压力和热应力作用使得裂隙渗透率增大, 注入泵功耗是降低的, 净输出功和热效率也是降低的。注入流量的增大提高了膨胀机轴功、注入泵功耗和生产温度衰减速率, 进而导致热效率降低, 存在最优的注入流量50 kg/s, 使得年均净输出功达到最大值1 470.1 kW。注入温度的增大可以提高系统热效率, 降低净输出功的年均衰减速率, 当注入温度为60 ℃时, 年均净输出功最大。井间距的增大减缓了生产温度的衰减速率, 有利于热效率的提高, 但是也同时也增大了膨胀机轴功和注入泵功耗。当分支井间距为450 m时, 年均净输出功达到最大值1 497.3 kW。此研究可为增强地热发电系统的开发利用提供指导。     

松辽盆地地热资源的形成与远景评价

松辽平原在地貌和地质上都是一个盆地。盆地中心区域上地幔隆升形成地幔枕，使本地区成为地壳中的一个热点，具有较高的地热背景。盆地是汇水区，盆地中部地域自然就成为地下热水主要的分布区。松辽盆地地热资源开发远景大有希望。     

地面磁测在巴西低纬度区铁矿勘查中的应用效果

通过对巴西某铁矿磁异常的处理分析,总结了层控型磁铁石英岩铁矿的磁异常特征,并利用化极与三维反演相结合的数据处理与分析手段,对磁异常携带的磁性体信息进行了更深的剖析和提取,通过化极结果圈定了磁性分布范围,利用三维反演结果确定了磁性体在地下的展布形态,钻孔验证结果充分说明物探推断的准确性.工作区位于低磁纬度区,这里提出的数据处理方法为低磁纬度区磁异常的认识提供了成功实例.     

Rainfall flood hazard at nuclear power plants in India

Flood hazard evaluation is an important input for Nuclear Power Plants external events safety studies. In the present study, flood hazard at various nuclear sites in India due to rainfall has been evaluated. Hazard estimation is a statistical procedure by which rainfall intensity versus occurrence frequency is estimated from historical records of rainfall data and extrapolated with asymptotic extreme value distribution. Rainfall data needed for flood hazard assessment are daily annual maximum rainfall (24?h data). The observed data points have been fitted using Gumbel, power law and exponential distribution, and return period has been estimated. To study the stationarity of rainfall data, a moving window estimate of the parameters has been performed. The rainfall pattern is stationary in both coastal and inland regions over the period of observation. The coastal regions show intense rainfall and higher variability than inland regions. Based on the plant layout, catchment area and drainage capacity, the prototype fast breeder reactor (PFBR) site is unlikely to be flooded.     

下扬子地区若干上地幔橄榄岩的显微构造研究

本文对下扬子区内２个玄武岩产地（江苏六合瓜埠山、安徽当涂釜山）的幔源包体进行研究,结果表明本区上地幔尖晶石二辉橄榄岩具原生粒状结构、碎斑结构、板状镶嵌等粒结构及部分熔融结构四种类型。在光学岩组图上显示出从原生粒状结构→碎斑结构→板状镶嵌等粒结构,其橄榄石光性方位优选性逐渐增强。变形橄榄石滑移轴为［１００］,滑移面以｛０ｋ１｝为主,（０１０）次之。高温高压人工变形实验证实,这种滑移系形成于高温低应变速率条件下。橄榄石位错类型多样,（１００）、（００１）位错壁分布广泛,位错壁间距显示对数正态分布特征．估算的本区上地幔高温蠕交流动差异应力为（１０．９～１１．５ＭＰａ）。上地幔流变速率、流动应力、等效粘滞度与深度关系指示本区新生代大地构造性质为大陆拉张带或大陆裂谷带。     

基于分布式光纤传感技术的流速测量方法研究

简要介绍了分布式光纤传感技术的流速测量方法的主要仪器设备。在研究加热光纤与流水之间传热过程的基础上,推导了流速与光纤稳定温升、加热功率等参数之间的基于分布式光纤传感技术的流速测量方法的理论方程。设计了模型试验,对不同流速与加热功率下,光纤温升情况进行了试验研究。在试验数据分析的基础上,研究了静水与流水中光纤温升情况,结果表明：所有温升曲线都可以分为上升和稳定两个阶段,流水中的光纤温升明显低于静水中的光纤温升,两者的差值随着功率及流速的不同而不同。加热功率越大,两者温差越大;流速越大,温差越大。研究了加热功率对静水中光纤温升的影响,通过分析发现：静水中的光纤稳定温升与加热功率之间存在着良好的线性关系。重点分析了在一定功率下,流速与光纤稳定温升之间的关系,结果表明光纤稳定温升与水流速度呈非直线的反比关系。最后,对该方法进行了讨论,提出了下一步研究建议。     

Conditioning Geostatistical Operations to Nonlinear Volume Averages

The all-important process of data integration calls for algorithms that can handle secondary data often defined as nonlinear averages of the primary (hard) data over specific areas or volumes. It is suggested to approximate these nonlinear averages by linear averages of a nonlinear transform of the primary variable. Kriging of such nonlinear transforms, followed by the inverse transform, allows exact reproduction of all original data, both of point support and nonlinear volume averages. In a simulation mode, the previous cokriging provides the mean and variance of a conditional distribution from which to draw a simulated value, which is then backtransformed into a simulated value of the primary variable. The nonlinear averaged data values are then reproduced exactly. The direct sequential simulation algorithm adopted does not call for using any Gaussian distribution.     

AutoCAD技术在道路工程施工测量中的应用

在道路建设中,通常分为几个标段同时施工,每个标段里一般包括路基及各种构造物,因此,施工测量任务十分繁重,由于全站仪在工程测量中的普遍应用,其极坐标放样功能使测量工作中出现错误主要为坐标计算错误,特别是具有记忆功能的全站仪,可以事先输入坐标,复核后再到现场放样。所以测量的主要工作就是根据施工图纸计算其各个部位的坐标,而如何快速、准确地计算坐标是关键所在。应用AutoCAD技术进行坐标定位计算,则可以做到事半功倍,并能取得良好的施工效果。     

泊江海子矿白垩纪地层冻结软岩力学特性试验

针对泊江海子矿白垩纪地层中的砂岩和泥岩,分别进行了不同温度（-20~20℃）下的三轴压缩试验。试验结果表明：在-20~20℃之间,白垩纪地层软岩的峰值强度和弹性模量均随温度的降低及围压的升高而增加,其中中砂岩的峰值强度随温度的变化程度明显大于泥岩,即其对温度的敏感性更高;而岩石峰值处的轴向应变则随温度的下降而减小;另外,随着温度降低,两种岩石的峰值内摩擦角和黏聚力均有一定程度的提高,并且抗剪强度指标的增加主要集中在黏聚力上。通过对试验结果的整理和分析,掌握了白垩纪地层软岩在不同低温和围压下的力学特性和规律,为西部地区矿井冻结法设计与施工提供了可靠的依据。