经典选权迭代法研究与两步抗差估计的提出

随着权函数的不同出现了不同的抗差估计方法,相应不同的抗差估计方法在一定程度上存在着不足或者缺陷。详细地论述了几种经典的选权迭代抗差估计方法的不足,并从理论出发,提出了两步抗差方案。     

基于坐标归一化和奇异值分解的直接线性变换解法

直接线性变换方法是数字摄影测量和计算机视觉领域最常用的解析处理方法之一,特别适用于未检校数码相机的三维测量,但直接线性参数间的相关性、物方控制的约束和设计矩阵元素数量级的较大差异,均可导致法矩阵严重病态,从而影响解的稳定性。本文借鉴改进的八点基本矩阵估计算法,采用基于坐标归一化和奇异值分解的解法,即首先将像点和物点坐标进行相似变换得到归一化坐标后组成法矩阵,其次利用矩阵奇异值分解方法代替常规的最小二乘方法,模拟和真实数据表明,此方法可以有效提高解算精度和稳定性。     

多频载波相位组合进行单点定位

不同于双频数据的应用,多频数据的采用对单点定位有着特殊意义,可以更好地获得其模糊度的解。基于卫星导航定位系统多频载波相位线性组合理论,研究了具有特殊意义的组合观测值及其特性。在此基础上,通过多频观测值数据的数值仿真,采用新方法进行整周模糊度快速求解。编制了基于多频载波相位组合单点定位软件,通过结果的比较分析,得出有一定实际应用意义的结论。此方法算法简单,速度快,能够满足实时导航定位的需要,具有工程应用价值。     

CPⅢ测量数据处理系统开发若干关键技术研究

本文首先介绍了无砟轨道的相关内容,指出CPⅢ测量数据处理是整个建设中的关键,提出系统开发的总体目标与要求且设计了系统总体结构,详细阐述了系统开发中涉及的关键技术与基本理论,文中最后结合具体工程实例验证系统开发成果。     

基于高光谱Hyperion数据的线性光谱混合模型与神经网络模型的比较

混合像元问题是定量遥感中的热点问题之一,为了改进从遥感数据中提取定量信息,人们建立了各种混合光谱分解技术,其中线性光谱混合模型和神经网络模型就是两种比较成熟的方法。以陕西省横山地区的高光谱Hyperion数据为研究基础,通过最小噪声变换(MNF)、像元纯度指数(PPI)转换和RMS误差分析的迭代方法相结合提取影像中的纯净像元作为终端端元。分别运用神经网络模型和线性光谱混合模型对影像进行光谱分解,得到各个组分的分解图像。以标准植被指数(NDVI)影像为衡量标准,选取训练样本点,分别对两种模型进行回归分析,结果显示NDVI影像与线性光谱混合模型植被分解图像的判定系数(R2=0.91)要大于其与神经网络模型的判定系数(R2=0.81)。进一步分析表明在一般情况下,线性光谱混合模型具有比神经网络模型略高的分离精度,但是神经网络模型对细部信息的提取的效果要好于线性光谱混合模型,最后提出了端元均方根误差(EAR)指数,一种新的混合像元分解的思路。     

遥感图像线性影纹理解专家系统设计与实现

线性影纹信息是遥感图像中的一类重要信息,线性影纹信息自动提取是遥感图像智能解译的重要研究领域。笔者采用基于特征对象的专家系统技术来完成线性影纹信息的简单类别提取,设计并实现了线性影纹理解专家系统;阐明了系统结构,解译规则获取、表达,基于消息的不确定性推理机及解释机的设计;最后利用系统做了线性影纹类别提取实验,结果表明基于特征对象的专家系统用于线性影纹类别自动提取是切实可行的,并具有较高的提取精度。     

Applications of AnnAGNPS model for soil loss estimation and nutrient loading for Malaysian conditions

The study evaluated the performance and suitability of AnnAGNPS model in assessing runoff, sediment loading and nutrient loading under Malaysian conditions. The watershed of River Kuala Tasik in Malaysia, a combination of two sub-watersheds, was selected as the area of study. The data for the year 2004 was used to calibrate the model and the data for the year 2005 was used for validation purposes. Several input parameters were computed using methods suggested by other researchers and studies carried out in Malaysia. The study shows that runoff was predicted well with an overall R² value of 0.90 and E value of 0.70. Sediment loading was able to produce a moderate result of R² = 0.66 and E = 0.49, nitrogen loading predictions were slightly better with R² = 0.68 and E = 0.53, and phosphorus loading performance was slightly poor with an R² = 0.63 and E = 0.33. The erosion map developed was in agreement with the erosion risk map produced by the Department of Agriculture, Malaysia. Rubber estates and urban areas were found to be the main contributors to soil erosion. The simulation results showed that AnnAGNPS has the potential to be used as a valuable tool for planning and management of watersheds under Malaysian conditions.     

Regional yield estimation for winter wheat with MODIS-NDVI data in Shandong, China

The significance of crop yield estimation is well known in agricultural management and policy development at regional and national levels. The primary objective of this study was to test the suitability of the method, depending on predicted crop production, to estimate crop yield with a MODIS-NDVI-based model on a regional scale. In this paper, MODIS-NDVI data, with a 250 m resolution, was used to estimate the winter wheat (Triticum aestivum L.) yield in one of the main winter-wheat-growing regions. Our study region is located in Jining, Shandong Province. In order to improve the quality of remote sensing data and the accuracy of yield prediction, especially to eliminate the cloud-contaminated data and abnormal data in the MODIS-NDVI series, the Savitzky–Golay filter was applied to smooth the 10-day NDVI data. The spatial accumulation of NDVI at the county level was used to test its relationship with winter wheat production in the study area. A linear regressive relationship between the spatial accumulation of NDVI and the production of winter wheat was established using a stepwise regression method. The average yield was derived from predicted production divided by the growing acreage of winter wheat on a county level. Finally, the results were validated by the ground survey data, and the errors were compared with the errors of agro-climate models. The results showed that the relative errors of the predicted yield using MODIS-NDVI are between −4.62% and 5.40% and that whole RMSE was 214.16 kg ha⁻¹ lower than the RMSE (233.35 kg ha⁻¹) of agro-climate models in this study region. A good predicted yield data of winter wheat could be got about 40 days ahead of harvest time, i.e. at the booting-heading stage of winter wheat. The method suggested in this paper was good for predicting regional winter wheat production and yield estimation.     

神木北部矿区5-2煤层厚度及其底板高程趋势分析

为了查清神木北部矿区5-2煤层赋存特征及成因,选取了该矿区172个典型钻孔数据,用趋势分析法研究了5-2煤层的厚度及其底板高程度变化特征。结果显示:该区煤层厚度总体为南北厚中部薄,东厚西薄;底板高程为南北高中部低,东高西低;煤层厚度和其底板高程间普遍存在正相关关系。在该区构造稳定的背景下,后期改造对煤层厚度及其底板的影响很小,煤层赋存特征主要受沉积与剥蚀的控制。     

模拟退火算法在控制网平差中的应用

线性最小二乘估计在对非线性函数进行线性近似的过程中会产生模型误差,而一些非线性参数估计方法可能因为函数复杂而难以求导,法方程系数矩阵秩亏或呈病态矩阵时难以求解,非线性迭代解法有时对初始值的选择存在依赖性,不恰当的初始值会导致迭代无法收敛。针对这些问题,引入了模拟退火算法,介绍了该算法的基本原理、计算步骤和收敛性,并以3个控制网平差应用为例,说明该算法具有无需求导求逆,简洁实用,易于编程等优势,并能实现全局优化,获得高精度的平差结果。