双酶法制备低黏度辛烯基琥珀酸淀粉钠的工艺条件

对双酶法制备用作微胶囊壁材的低黏度辛烯基琥珀酸淀粉钠的工艺路线与工艺条件进行了研究。正交实验结果表明 ,在酯化淀粉乳质量浓度 2 0 %、每 g淀粉α 淀粉酶的用量为 6SKBU的条件下 ,影响产品性能的各因素中 ,糖化酶的用量对产品的DE值和流度的影响最大 ,各因素的重要性依次是 :糖化酶的用量、糖化酶作用时间、α 淀粉酶保温作用时间。最佳工艺条件是 :α 淀粉酶保温作用时间 4min ,每 g淀粉糖化酶用量 0 .2GAU ,糖化酶作用时间 2 .5h ,此时产品的DE值为 30 ,流度为 80左右     

Application of micropolar plasticity to post failure analysis in geomechanics

A micropolar elastoplastic model for soils is formulated and a series of finite element analyses are employed to demonstrate the use of a micropolar continuum in overcoming the numerical difficulties encountered in application of finite element method in standard Cauchy–Boltzmann continuum. Three examples of failure analysis involving a deep excavation, shallow foundation, and a retaining wall are presented. In all these cases, it is observed that the length scale introduced in the polar continuum regularizes the incremental boundary value problem and allows the numerical simulation to be continued until a clear collapse mechanism is achieved. The issue of grain size effect is also discussed. Copyright © 2004 John Wiley & Sons, Ltd.     

Plane Symmetric Domain Wall in Lyra Geometry

In this paper general solutions are found for domain walls in Lyra geometry in the plane symmetric spacetime metric given by Taub. Expressions for the energy density and pressure of domain walls are derived in both cases of uniform and time varying displacement field β. It is also shown that the results obtained by Rahaman et al [IJMPD, 10, 735 (2001)] are particular case of our solutions. Finally, the geodesic equations and acceleration of the test particle are discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Seismology of stellar envelopes: probing the outer layers of a star through the scattering of acoustic waves

The outer layers of Sun-like stars are regions of rapid spatial variation which modulate the p-mode frequencies by partially reflecting the constituent acoustic waves. With the accuracy that has been achieved by current solar observations, and that is expected from imminent stellar observations, this modulation can be observed from the spectra of the low-degree modes. We present a new and simple theoretical calculation to determine the leading terms in an asymptotic expansion of the outer phase of these modes, which is determined by the structure of the surface layers of the star. Our procedure is to compare the stellar envelope with a plane-parallel polytropic envelope, which we regard as a smooth reference background state. Then we can isolate a seismic signature of the acoustic phase and relate it to the stratification of the outer layers of the convection zone. One can thereby constrain theories of convection that are used to construct the convection zones of the Sun and Sun-like stars. The accuracy of the diagnostic is tested in the solar case by comparing the predicted outer phase with an exact numerical calculation.     

Gravitational collapse and equilibrium conditions of a toroidal vortex with thermal pressure

We found the equilibrium conditions for a self-gravitating toroidal vortex by taking thermal pressure into account. These conditions are shown to significantly differ from those for a disk or a sphere. The evolution of a thin vortex turns it into a compact vortex that loses mechanical stability for low masses at a polytropic index γ<4/3 but retains stability for sufficiently high masses and densities determined by the velocity circulation in the vortex.     

Reliability assessment of serviceability performance of braced retaining walls using a neural network approach

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.     

A geological and geotechnical investigation of the settlement area of Zümrüt Building (Konya, Turkey) which caused 92 fatalities due to its collapse

This study examines the local geological conditions and soil structure as possible causes of the collapse of the Zümrüt Building 2 February 2004. This catastrophe resulted in 92 fatalities and 35 injuries. This study also examines other views which claim weak soil structure, elastic and consolidation settlement of soil and excessive groundwater extraction as well as subsidence resulting from the underground silt erosion as possible factors. Zümrüt Building was constructed on normally consolidated, low plasticity clay. The underground water table was 30 m in depth. The internal friction angle of soil was 8°–30°, its cohesion was between 34 and 127 kN/m² and standard penetration test numbers varied between 11 and 50. The underground water level beneath Zümrüt Building had risen 4.5 m since its construction. Therefore the claim that subsidence resulting from the decrease of underground water level contributed to the collapse is incorrect. Secondly the settlement, resulting from the filling up of the pores created by the silt receding with the underground water, was 4.4 mm in total, and attributing this as the primary cause of the collapse is also incorrect. Soil properties, in situ and laboratory test results showed that the existing and/or expected settlement and the differential ground settlement in the Zümrüt building vicinity had the potential to cause structural damage. The tensile stresses caused by differential settlements recorded here are thought to be an indicator, but not the main cause contributing to the collapse of the building. The Zümrüt Building collapse was due to several compounding mistakes during the construction phase. These were geotechnical and other project faults and the use of low quality construction materials. The resulting catastrophe caused 92 fatalities, 35 injuries and a material loss of approximately US$7 million.     

Finite Element Modeling of Swelling Soil Pressures Using Joint/Interface Elements

There could be some discontinuities in a soil media such as layers, earth structures, cracks, and fissures so that estimation of stresses and deformations in these types of soil masses are somewhat different from continuous masses. The discontinuities in a soil mass could be considered as a special link between two blocks. Transmitted swelling pressures affected by the soil properties of the backfill especially at the interface between the backfill and retaining wall. In order to estimate the transmitted swelling pressure distribution behind a retaining wall, using with interface element, a new finite element model and a code (SWELPRES) have been developed. To evaluate the effect of backfill characteristics and interface element from the transmitted lateral swelling pressures, four cases of thickness of backfills with or without interface elements are investigated.     

Action of Cnoidal Waves on Vertical Walls

Based on the 2nd order cnoidal wave theory, the characters of shallow water standing waves and their action on vertical walls are studied in this paper. The theoretical expressions of the wave surface elevation in front of and the wave pressure on the vertical wall are obtained. In order to verify the theoretical results, model tests were made in the State Key Laboratory of Coastal and Offshore Engineering at DUT. For the wave surface elevation in front of the wall and the wave forces on the wall at the moment when the wave surface at the wall surface goes down to the bottom of the wave trough, the calculated results coincide quite well with the experimental results. For the wave forces on the wall at the moment when the wave surface at the wall surface goes up to the top of the wave crest, the theoretical expressions are modified by the experimental results. For the convenience of practical use, calculations are made for the wave conditions which usually occur in enginering practice by use of the inves     

An Approach to Stability Analysis of Embedded Large-Diameter Cylinder Quay

The large-diameter cylinder structure, which is made of large successive bottomless cylinders placed on foundation bed or partly driven into soil, is a recently developed retaining structure in China. It can be used in port, coastal and off-shore works. The method for stability analysis of the large-diameter cylinder structure, especially for stability analysis of the embedded large-diameter cylinder structure, is an important issue. In this paper, an idea is presented that is, em-bedded large-diameter cylinder quays can be divided into two types, i.e. the gravity wall type and the cylinder pile wall type. A method for stability analysis of the large-diameter cylinder quay of the cylinder pile wall type is developed and a method for stability analysis of the large-diameter cylinder quay of the gravity wall type is also proposed. The effect of sig-nificant parameters on the stability of the large-diameter cylinder quay of the cylinder pile wall type is investigated through numerical calculation.