Comparison of the Langrangian Footprint

We compare flux and concentration footprint estimates of athree-dimensional Lagrangian stochastic dispersion modelapplying backward trajectories with the results of ananalytical footprint model by Kormann and Meixner.The comparison is performed for varying stability regimesof the surface layer as well as for different measurementheights. In general, excellent correspondence is found.     

铂族元素迁移富集机理的新探

在岩浆及高温热液中，拍族元素以纳米液态铂族元素单质、铂族元素与其它金属元素的纳米液态合金、纳米液态铂族元素的硫、砷化物迁移。在中、低温热液及表生条件下，除呈上述固态纳米铂族矿物随流体迁移外，还呈配合物形式迁移。然后它们在合适的条件下沉淀富集形成矿床。此外，还讨论了铂族元素与金地球化学条件的异同。     

南极中山站近岸海冰生态学研究Ⅲ.冰藻优势种的季节变化及其与冰下浮游植物的关系

自１９９２年４月１２日至１２月３０日对中山站以西内拉峡湾海冰和冰下水柱中藻类优势种组成和丰度进行了测定。４月份和１１月中旬至１２月中旬冰柱和水柱（０～５０ｍ）藻类丰度高达１０８～１０９ｃｅｌｓ／ｍ２。冰藻的普遍或季节性优势种主要包括Ａｍｐｈｉｐｒｏｒａｋｊｅｌｍａｎｉ、Ｂｅｒｋｅｌｅｙａｒｕｔｉｌａｎｓ、Ｎａｖｉｃｕｌａｇｌａｃｉｅｉ、Ｎｉｔｚｓｃｈｉａｂａｒｋｌｅｙｉ、Ｎ．ｃｙｌｉｎｄｒｕｓ、Ｎ．ｌｅｃｏｉｎｔｅｉ和Ｎｉｔｚｓｃｈｉａｓｐ．。由于藻类结合入冰后自身的演替，春－夏季海冰剖面中所记录的优势种组成并不能准确反映冰底优势种的季节演替过程。从冰底和水表藻种组成的对比表明，两者仅在春末冰底冰藻水华期间具有较强的相似性。秋、春季冰底冰藻水华的形成以现场生长为主，夏初冰藻释放入水后对冰下浮游植物的播种作用不明显。     

The onset of Pleistocene glaciation in the Barents Sea: implications for glacial isostatic adjustment

In this paper the effect of a delayed onset of glaciation in the Barents Sea on glacial isostatic adjustment is investigated. The model calculations solve the sea-level equation governing the total mass redistributions associated with the last glaciation cycle on a spherically symmetric, linear, Maxwell viscoelastic earth for two different scenarios for the growth phase of the Barents Sea ice sheet. In the first ice model a linear growing history is used for the Barents Sea ice sheet, which closely relates its development to the build-up of other major Late Pleistocene ice sheets. In the second ice model the accumulation of the Barents Sea ice sheet is restricted to the last 6 ka prior to the last glacial maximum.
The calculations predict relative sea levels, present-day radial velocities, and gravity anomalies for the area formerly covered by the Weichselian ice sheet. The results show that observed relative sea levels in the Barents Sea are appropriate for distinguishing between the different glaciation histories. In particular, present-day observables such as the free-air gravity anomaly over the Barents Sea, and the present-day radial velocities are sensitive to changes in the glaciation history on this scale.
A palaeobathymetry derived from relative sea-level predictions before the last glacial maximum based on the second ice model essentially agrees with a palaeobathymetry derived by Lambeck (1995). The additional emerged areas provide centres for the build-up of an ice sheet and thus support the theory of Hald, Danielsen & Lorentzen (1990) and Mangerud et al. (1992) that the Barents Sea was an essentially marine environment shortly before the last glacial maximum.     

乌鲁木齐河源1号冰川积累区透底冰芯地层及冰结构分析

对乌鲁木齐河源１号冰川积累区一支深达９１．６４ｍ的透底冰芯进行了详细的层位及冰结构分析，结果表明，在２０ｍ深度以内，很好地保存了原始沉积的特征，但在７０￣８０ｍ深处还发现小密度的乳白色冰占优势的冰层，可能形成于小冰期，中层具有动力变质及再结晶作用共存及反复消长的结构特征（冰晶尺寸、气泡），未见单极大型组构，但出现弱竖环形组构，底层出现弱宝石状的多极大组构。     

Transport in a 2-D saturated porous medium: A new method for particle tracking

A new method for solving the transport equation based on the management of a large numbe of particles in a discretized 2-D domain is presented. The method uses numerical variables to represent the number of particles in a given mesh and is more complex than the 1-D problem. The first part of the paper focuses on the specific management of particles in a 2-D problem. The method also would be valid for three dimensions as long as the medium can be modeled similar to a layered system. As the particles are no longer tracked individually, the algorithm is fast and does not depend on the number of particles present. The numerical tests show that the method is nearly numerical dispersion free and permits accurate calculations even for simulations of low-concentration transport. Because each mesh is considered as a closed system between two successive time steps, it is easy to add adsorption phenomenon without any problem of numerical stability. The model is tested under conditions that are extremely demanding for its operating mode and gives a good fit to analytical solutions. The conditions in which it can be used to best advantage are discussed.     

Surface chemical analysis in coal preparation research: complementary information from XPS and ToF-SIMS

The application of X-ray photoelectron spectroscopy (XPS) to coal surface characterisation for preparation research is described. Progress towards the acquisition of complementary surface chemical information by time-of-flight secondary ion mass spectrometry (ToF-SIMS) is also discussed. Surface-based beneficiation techniques such as flotation are assuming greater importance as the proportion of fines in raw coal increases due to the proliferation of high capacity mining methods. A necessary condition for the floatability of a coal particle is adequate hydrophobicity, and the degree of hydrophobicity of the flotation concentrate is one factor influencing the ease with which its dewatering can be affected. The hydrophobicity of a coal is very difficult to measure directly because of microporosity, and it is often necessary to deduce the degree of hydrophobicity from a knowledge of the surface chemistry. XPS is able to provide sufficient analytical data to allow relative levels of hydrophobicity to be estimated. In principle, ToF-SIMS should be able to supply additional information enabling refinement of such estimates; however, there are insufficient data at present to allow the ionic fragments detected to be related to specific functional groups at the coal surface.     

A Simple Parameterisation for Flux Footprint Predictions

Flux footprint functions estimate the location and relative importance of passive scalar sources influencing flux measurements at a given receptor height. These footprint estimates strongly vary in size, depending on receptor height, atmospheric stability, and surface roughness. Reliable footprint calculations from, e.g., Lagrangian stochastic models or large-eddy simulations are computationally expensive and cannot readily be computed for long-term observational programs. To facilitate more accessible footprint estimates, a scaling procedure is introduced for flux footprint functions over a range of stratifications from convective to stable, and receptor heights ranging from near the surface to the middle of the boundary layer. It is shown that, when applying this scaling procedure, footprint estimates collapse to an ensemble of similar curves. A simple parameterisation for the scaled footprint estimates is presented. This parameterisation accounts for the influence of the roughness length on the footprint and allows for a quick but precise algebraic footprint estimation.     

颗粒分析用量筒的规格标准和计量标定

文章讨论了国内外用于密度计法颗粒分析用量筒的计量标准的规定，提出了相应的建议和标定方法。     

探测冰盖和多年冻土层的融冰探头研发

The exploration of ice sheets by melting vertical holes into the ground has some tradition in terrestrial glaciology. Such probes have been used since the 1960's to investigate the vertical structure of the ice in Greenland and Antarctica and in alpine glaciers. In this paper we look into the possibility to develop similar devices for use on extraterrestrial icy bodies, like e.g. the polar areas on Mars or the icy satellites of the outer solar system. We report on some basic experiments performed in the cryo-vacuum laboratory of the Space Research Institute of the Austrian Academy of Sciences, Graz. In these experiments the penetration of a simple melting probe into compact and porous water ice (with a snow-like texture) was monitored, both under vacuum conditions and under air pressure. The observed penetration speeds for a given power supply are compared with a simple mathematical model. We conclude that a miniature melting probe with small overall dimensions and a reasonable power demand could well be part of the payload of a future planetary mission, for example to the poles of Mars. Such missions are currently under discussion in several space agencies. Moreover such probes could also e? ectively be used in terrestrial environments. A possible design is presented at the end of the paper.