矿体三维数据模型及品位插值方法研究

传统的储量计算方法采用几何平均法计算矿体的体积,用部分化验数据的平均品位代替矿块的整体品位,其计算精度很难满足需要.以三维矿体模型为基础计算矿体体积能够提高体积计算精度,以空间插值技术对矿体任意空间位置的品位进行估值,有助于提高品位估值的精度.提出了一种适于矿体储量计算的混合数据模型（线框块段模型）,详细论述了根据剖面数据生成矿体线框模型进而在线框模型基础上生成块段模型的方法.介绍了距离反比法和克立格法的原理,利用距离反比法结合某金矿体数据进行了储量估算,结果表明以线框块段模型为基础,采用空间插值技术计算矿体储量具有一定的实用价值.     

潜孔锤偏心跟管钻进法在卵砾石地层岩土工程勘察中的应用

卵砾石地层是钻探工程中常见的一种典型的难钻进不稳定地层。通过采用潜孔锤偏心跟管钻进法,从根本上解决了卵砾石地层难以钻进的难题,结合都匀市区岩土工程勘察实例,笔者认为潜孔锤偏心跟管钻进法是在卵砾石地层钻进中行之有效的一种钻进法。     

磷矿石中磷、钙、镁、锶、氟测定方法评述

本文系统分析了磷矿石高含量磷、钙、镁、锶、氟诸元素存在时对其测定的相互影响及其测定中存在的问题,比较全面地总结了国内分析工作者针对该问题,对诸难测元素在常规分析方法方面的工作进展。     

酸溶法测定硫铁矿中的全硫

在野外地质队实验室仪器少的条件下,用酸溶的方法分析硫铁矿中全硫,简单、快速、易操作,取得良好的结果。     

论直流激发极化法的视电阻率参数

直流激发极化法,计算视电阻率的一次场采集于供电方波的末端时间,从而包含了被激发形成的二次场。在高极化率地质体上,得到的视电阻率将削弱其低阻特性或放大高阻特性。为此,建议在野外工作中,应对所采集的一次场作适当的处理后,再计算视电阻率,以降低这种影响。     

最优TS评分方法在逐时降水订正中的初步应用及评估

使用2020年3—9月逐时更新的CMA广东短临3 km数值模式(CMA-GD(R3)模式)1～12 h逐小时降水量资料,利用最优TS评分订正方法(OTS)对逐小时降水量进行分级订正,并分别从整体和分类型降水过程预报订正效果进行了检验和对比评估。结果表明：从整体预报订正性能来看,通过OTS方法对CMA-GD(R3)模式订正后,对于≥1 mm/h及以上量级的降水,OTS均有较好的订正能力,并且随着雨强的增加,其TS评分的改善比率越大;同时,OTS可有效减少各个预报时效的漏报率和空报率,其中漏报率减小更加明显,表现出明显的湿偏差(空报偏多)。从三类暴雨过程逐时降水预报订正效果来看,通过OTS订正之后,对于≥1 mm/h的降水,OTS对三类暴雨类型均有正的订正能力。其中在0.1 mm、1 mm、10 mm、20 mm、35 mm、50 mm 6个量级上,季风型的逐时降水预报表现最好,6个量级的TS评分值分别为0.403、0.232、0.053、0.023、0.009和0.004;在5 mm量级上锋面型的逐时降水预报表现最优,其TS值为0.102。从改善效果来看,经过OTS订正后,在1 mm量级...     

A finite differences formulation for the linear and nonlinear dynamics of 2D catenary risers

A finite differences (FD) solution method is proposed for the numerical treatment of the dynamic equilibrium problem of 2D catenary risers. The method is based on the so-called Box approximation, which in the scope of the present contribution is applied to the complete nonlinear model as well as to the reduced linearized formulation. The application of the Box method transforms the original governing systems into convenient sets of algebraic equations, which in turn are solved efficiently by the relaxation method. Extensive numerical calculations are presented that describe the dynamic behaviour of the structure and evaluate the amplification in loading due to the dynamic components. The effect of the geometric nonlinearities is assessed through comparative calculations that concern both mathematical formulations examined in the present, i.e. the complete nonlinear, and the reduced linearized model. Special attention is paid to the heave excitations as they amplify significantly the magnitudes of the loading components.     

Verification of significant wave representation method

The significant wave representation method is the simplest method for computing the transformation of significant wave height across-shore. However, many engineers are reluctant to use this method because many researchers have pointed out that the method possibly contains a large estimation error. Nevertheless, Rattanapitikon et al. [Rattanapitikon, W., Karunchintadit, R., Shibayama, T., 2003. Irregular wave height transformation using representative wave approach. Coastal Engineering Journal, JSCE 45(3), 489–510.] showed that the wave representation method could be used to compute the transformation of root mean square wave heights. It may also be possible to use it for computing the significant wave height transformation. Therefore, this study was carried out to examine the possibility of simulating significant wave height transformation across-shore by using the significant wave representation method. Laboratory data from small- and large-scale wave flumes were used to calibrate and examine the models. Six regular wave models were applied directly to irregular waves by using the significant wave height and spectral peak period. The examination showed that three regular wave models (with new coefficients) could be used to compute the significant wave height transformation with very good accuracy. On the strength of both accuracy and simplicity of the three models, a suitable model is recommended for computing the significant wave height transformation. The suitable model was also modified for better predictions. The modified model (with different coefficients) can be used to compute either regular wave height or significant wave height transformation across-shore.     

Numerical calculation of free-surface potential flow around a ship using the modified Rankine source panel method

A modified Rankine source panel method is presented for solving a linearized free-surface flow problem with respect to the double-body potential. The method of solution is based on the distribution of Rankine sources on the hull as well as its image and on the free surface. An iterative algorithm is used for determining the free surface and wave resistance using upstream finite difference operator. A verification of numerical modeling is made using the Wigley hull and the validity of the computer program is examined by comparing the details of wave profiles and wave making resistance with Series 60 model.     

Assessment of boundary-element method for modelling a free-floating sloped wave energy device. Part 1: Numerical modelling

The boundary-element method has been widely used as a design tool in the offshore and ship building industry for more than 30 years. Its application to wave energy conversion is, however, more recent. This paper deals with the numerical modelling of a free-floating sloped wave energy device. The power take-off mechanism of the device consists of an immersed tube with a piston sliding inside. The modelling is done using the boundary-element method package WAMIT. The model is first worked out for the case where the axis of the tube is vertical. It is then derived for the tube inclined and successfully verified against numerical benchmark data. A companion paper presents results of a detailed comparison with a physical model study.