Validation of the SCEC Broadband Platform simulations for tall building risk assessments considering spectral shape and duration of the ground motion

Earthquake simulation technologies are advancing to the stage of enabling realistic simulations of past earthquakes as well as characterizations of more extreme events, thus holding promise of yielding novel insights and data for earthquake engineering. With the goal of developing confidence in the engineering applications of simulated ground motions, this paper focuses on validation of simulations for response history analysis through comparative assessments of building performance obtained using sets of recorded and simulated motions. Simulated ground motions of past earthquakes, obtained through a larger validation study of the Southern California Earthquake Center Broadband Platform, are used for the case study. Two tall buildings, a 20‐story concrete frame and a 42‐story concrete core wall building, are analyzed under comparable sets of simulated and recorded motions at increasing levels of ground motion intensity, up to structural collapse, to check for statistically significant differences between the responses to simulated and recorded motions. Spectral shape and significant duration are explicitly considered when selecting ground motions. Considered demands include story drift ratios, floor accelerations, and collapse response. These comparisons not only yield similar results in most cases but also reveal instances where certain simulated ground motions can result in biased responses. The source of bias is traced to differences in correlations of spectral values in some of the stochastic ground motion simulations. When the differences in correlations are removed, simulated and recorded motions yield comparable results. This study highlights the utility of physics‐based simulations, and particularly the Southern California Earthquake Center Broadband Platform as a useful tool for engineering applications.     

Effect of irregular structural configuration on floor acceleration demand in hill‐side buildings

A suite of reinforced‐concrete frame buildings located on hill sides, with 2 different structural configurations, viz step‐back and split‐foundation, are analyzed to study their floor response. Both step‐back and split‐foundation structural configurations lead to torsional effects in the direction across the slope due to the presence of shorter columns on the uphill side. Peak floor acceleration and floor response spectra are obtained at each storey's center of rigidity and at both its stiff and flexible edges. As reported in previous studies as well, it is observed that the floor response spectra are better correlated with the ground response spectrum. Therefore, the floor spectral amplification functions are obtained as the ratio of spectral ordinates at different floor levels to the one at the ground level. Peaks are observed in the spectral amplification functions corresponding to the first 2 modes in the upper portion of the hill‐side buildings, whereas a single peak corresponding to a specific kth mode of vibration is observed on the floors below the uppermost foundation level. Based on the numerical study for the step‐back and split‐foundation hill‐side buildings, simple floor spectral amplification functions are proposed and validated. The proposed spectral amplification functions take into account both the buildings' plan and elevation irregularities and can be used for seismic design of acceleration‐sensitive nonstructural components, given that the supporting structure's dynamic characteristics, torsional rotation, ground‐motion response spectrum, and location of the nonstructural components within the supporting structure are known, because current code models are actually not applicable to hill‐side buildings.     

超高层建筑平面控制网竖向传递实践与研究

分析了超高层建筑平面控制网的建立及竖向传递的方法,介绍了数字正垂在测定超高层建筑倾斜偏差的具体应用,实现了用全站仪法和GPS法来检核控制网竖向传递的精度。     

Effects of supplemental viscous damping on seismic response of asymmetric-plan systems

Coupling between lateral and torsional motions may lead to much larger edge deformations in asymmetric-plan systems compared to systems with a symmetric plan. Supplemental viscous damping has been found to be effective in reducing deformations in the symmetric-plan system. This investigation examined how supplemental damping affects the edge deformations in asymmetric-plan systems. First, the parameters that characterize supplemental viscous damping and its plan-wise distribution were identified, and then the effects of these parameters on edge deformations were investigated. It was found that supplemental damping reduces edge deformations and that reductions by a factor of up three are feasible with proper selection of system parameters. Furthermore, viscous damping may be used to reduce edge deformations in asymmetric-plan systems to levels equal to or smaller than those in the corresponding symmetric-plan system. © 1998 John Wiley & Sons, Ltd.     

The ductility reduction factor in the seismic design of buildings

This paper presents new trends in the relationship between the ductility reduction factor and the ductility demand in the seismic design of buildings. A total of 4860 inelastic time-history analyses were carried out to study this relationship using 60 single-degree-of-freedom models excited by an ensemble of 81 earthquake accelerogram records from around the world. The asymmetrical distribution of the results highlighted the inaccuracies associated with assuming a normal distribution simply described by the mean and standard deviation to represent the data. A probability of exceedence approach has been used based on counting the number of occurrences the ductility demand exceeds a specified level. The ductility reduction factors developed in this study are consistent with other studies in the long-period range but are different in the short-period range. The ductility reduction factor for very short period buildings of limited ductility has been found to be greater than previously predicted. © 1998 John Wiley & Sons, Ltd.     

Torsional mechanisms in ductile building systems

It is postulated that in order to estimate torsional effects on the seismic response of ductile building structures, the associated plastic mechanism to be developed in the three-dimensional system should be identified. The proposed approach is very different from that embodied in building codes. Inelastic structures are classified as either torsionally unrestrained or restrained. It is shown that clearly defined mechanisms that are to be mobilized, enable the acceptable system ductility demand to be estimated. This should ensure that the corresponding demands imposed on critical translatory elements of the system do not exceed their established displacement ductility capacity. To this end familiar quantities, such as element yield displacement and stiffness, are redefined. Comparisons are made of the intents of existing codified design approaches and those emphasising the role of imposed inelastic displacements. A simple treatment of the consequences of earthquake-induced inelastic skew displacements is also addressed. The primary aim of the paper is to offer very simple concepts, based on easily identifiable plastic mechanisms, to be utilized in structural design rather than advancement in analyses. Detailed design applications of these concepts are described elsewhere. The approach is an extension of the deterministic philosophy of capacity design, now used in some countries. © 1998 John Wiley & Sons, Ltd.     

Evaluation of building separation distance required to prevent pounding during strong earthquakes

Presented herein is an analytical procedure for evaluating the separation distance required between two buildings to prevent pounding during strong earthquakes. The procedure is based on equivalent linearization of non-linear hysteretic behaviour and application of the well-known CQC method of weighting normal mode responses. The numerical results obtained are compared with corresponding results obtained using the well-known SRSS and ABS methods. © 1997 John Wiley & Sons, Ltd.     

Seismic reliability assessment and the nonergodicity in the modelling parameter uncertainties

Modelling uncertainty can significantly affect the structural seismic reliability assessment. However, the limit state excursion due to this type of uncertainty may not be described by a Poisson process as it lacks renewal properties with the occurrence of each earthquake event. Furthermore, considering uncertainties related to ground motion representation by employing recorded ground motions together with modelling uncertainties is not a trivial task. Robust fragility assessment, proposed previously by the authors, employs the structural response to recorded ground motion as data in order to update prescribed seismic fragility models. Robust fragility can be extremely efficient for considering also the structural modelling uncertainties by creating a dataset of one-to-one assignments of structural model realizations and as-recorded ground motions. This can reduce the computational effort by more than 1 order of magnitude. However, it should be kept in mind that the fragility concept itself is based on the underlying assumption of Poisson-type renewal. Using the concept of updated robust reliability, considering both the uncertainty in ground motion representation based on as-recorded ground motion and non ergodic modelling uncertainties, the error introduced through structural reliability assessment by using the robust fragility is quantified. It is shown through specific application to an existing RC frame that this error is quite small when the product of the time interval and the standard deviation of failure rate is small and is on the conservative side.     

基于天地图高精度建筑物的四川宝兴县人口估算

为了提高震前灾害风险评估和震后灾情快速评估工作中人口空间分布估计的准确性,利用2016年四川宝兴县乡镇人口数据及天地图中的建筑物数据,运用居住建筑人口密度方法得到四川宝兴县各乡镇居住建筑物尺度的人口分布矢量数据,并利用实地调研获取的单体建筑物实际人口进行精度验证。实验结果表明:以居住建筑物体积作为人口空间分布指示因子建模,得到的拟合精度为0.9027,人口平均相对误差为15.23%,结果具有可靠性,可为震前灾害风险评估和震后灾情快速评估提供更为可靠的数据支撑。