三维高密度电阻率法在堤坝工程中的模拟试验

为检测堤坝中裂隙、洞穴及渗漏层等隐患的存在,利用三维高密度电阻率法对数字模型和物理模型建立的裂隙隐患进行探测,结果表明室内建立的物理模型在立体图和分层切片图中裂隙的形态有些变化,但其分布范围、位置与相对各自模型中实际的比例尺寸相差不大,说明数值模拟得出的结论可以为实际工程进行理论指导,具有一定的参考价值。     

高放废物处置库新疆阿奇山预选地段区域水文地质特征

新疆阿奇山地区是我国高放废物处置库预选地段之一。在野外调查、样品采集和测试的基础上,讨论了该地段区域水文地质特征,结果表明,阿奇山地段地下水可划分为松散岩类孔隙水、碎屑岩类裂隙孔隙水和基岩裂隙水3种类型,其单井涌水量一般10m~3/d,属于典型的低含水介质;区域地下水流向为自南东流向北西;位于吐鲁番盆地的艾丁湖一带为阿奇山地段地下水的最终排泄区。     

高研磨性地层复合式钻头的研制与应用

金山气田、龙凤山构造、长岭断陷等登娄库组以下深部地层可钻性差,研磨性强,导致钻头磨损严重,使用效率低。在对牙轮钻头、PDC钻头及孕镶金刚石钻头在高研磨性地层中的适应性进行细致和全面分析的基础上,提出了把PDC钻头机械钻速高和孕镶金刚石钻头进尺多的技术优势相结合的研制思路,开展PDC+孕镶复合式钻头设计。现场应用取得了良好的试验效果。提出了合理化的建议。     

新型抗高温二次交联凝胶堵漏材料的研制

针对普通凝胶抗温能力较差难以适用于高温地层堵漏作业的问题,通过设计合成抗高温凝胶主剂GN-1并运用二次交联技术,研发了新型抗高温凝胶堵漏材料。优选配方为：淡水+1.5%GN-1+0.15%地面交联剂+1%井下交联剂+0.2%抗氧化剂。通过热滚老化与高温流变测试相结合的手段对凝胶抗温能力进行评价。结果表明,该凝胶材料具有良好的热稳定性,在180 ℃下老化24 h后,7.34 s-1下剪切粘度＞10000 mPa?s。大幅加重后180 ℃老化24 h仍能保持较好的粘弹性。此外还考察了不同温度和pH值下的成胶性能以及与聚磺钻井液体系的配伍性,为抗高温凝胶堵漏材料在现场的应用奠定基础。     

高等级海况条件下移动式海上基地动力响应分析

针对半潜式超大型浮式结构中典型的移动式海上基地(Mobile Offshore Base,MOB)在高等级海况下的动力响应问题展开研究。在MOB结构"刚性模块-柔性连接构件(Rigid Modules and Flexible Connectors,RMFC)"模型的前提下,根据动力学基本原理,经理论推导并计算得到MOB分别在6、7、8级海况的随机波激励下,其上各模块的动力响应位移结果。详细分析了MOB结构同一模块在不同海况条件下的动力响应位移随浪向角及连接构件刚度的变化规律。研究成果可为半潜式超大型浮式结构动力响应研究及结构优化设计提供一定的技术支撑。     

高频地波雷达海杂波背景下的船只目标检测研究进展

针对海杂波对高频地波雷达目标检测的干扰问题,分目标处于海杂波谱区之内和之外两种情况综述了海杂波背景下的目标检测方法。对于海杂波内目标检测的难题,介绍了一种基于现场海态同步观测信息的检测新思路以及初步验证结果。对国内外相关研究进展的归纳总结和新思路的提出,为提出更加有效的海杂波干扰下的目标检测方法提供了重要的参考。     

High Precision Sr‐Nd‐Hf‐Pb Isotopic Compositions of USGS Reference Material BCR‐2

The Lamont‐Doherty Earth Observatory radiogenic isotope group has been systematically measuring Sr‐Nd‐Pb‐Hf isotopes of USGS reference material BCR‐2 (Columbia River Basalt 2), as a chemical processing and instrumental quality control monitor for isotopic measurements. BCR‐2 is now a widely used geochemical inter‐laboratory reference material (RM), with its predecessor BCR‐1 no longer available. Recognising that precise and accurate data on RMs is important for ensuring analytical quality and for comparing data between different laboratories, we present a compilation of multiple digestions and analyses made on BCR‐2 during the first author's dissertation research. The best estimates of Sr, Nd and Hf isotope ratios and measurement reproducibilities, after filtering at the 2s level for outliers, were ⁸⁷Sr/⁸⁶Sr = 0.705000 ± 11 (2s, 16 ppm, n = 21, sixteen digestions, one outlier), ¹⁴³Nd/¹⁴⁴Nd = 0.512637 ± 13 (2s, 25 ppm, n = 27, thirteen digestions, one outlier) and ¹⁷⁶Hf/¹⁷⁷Hf = 0.282866 ± 11 (2s, 39 ppm, n = 25, thirteen digestions, no outliers). Mean Nd and Hf values were within error of those reported by Weis et al. (2006, 2007) in their studies of RMs; mean Sr values were just outside the 2s uncertainty range of both laboratories. Moreover, a survey of published Sr‐Nd‐Hf data shows that our results fall within the range of reported values, but with a smaller variability. Our Pb isotope results on acid leached BCR‐2 aliquots (n = 26, twelve digestions, two outliers) were ²⁰⁶Pb/²⁰⁴Pb = 18.8029 ± 10 (2s, 55 ppm), ²⁰⁷Pb/²⁰⁴Pb = 15.6239 ± 8 (2s, 52 ppm), ²⁰⁸Pb/²⁰⁴Pb = 38.8287 ± 25 (2s, 63 ppm). We confirm that unleached BCR‐2 powder is contaminated with Pb, and that sufficient leaching prior to digestion is required to achieve accurate values for the uncontaminated Pb isotopic compositions.     

走滑断裂古地震探槽选址范例

探槽选址直接决定了古地震研究的质量,且理想探槽位置具有稀缺性。在收集82篇国内外走滑断裂古地震研究论文的基础上,分析了长序列古地震探槽选址和同震位移探槽选址的构造地貌共性特征。长序列古地震探槽一般布设在断塞塘、拉分盆地、小型湖盆、闸门脊汇水一侧及比较平缓的冲洪积扇或大型冲洪积扇末端等地貌位置。这些地貌位置的共同特征是位于连续的、较高沉积速率的沉积环境,且通常富集14C测年物质。在探槽选址的过程中,不仅要对现今沉积环境,也要对其古地理环境进行评价。然而以发掘古地震同震位移为目的的探槽选址则不同,成功的研究点往往较频繁发生侵蚀和下切事件,其中冲沟是最常见的地貌标志。探槽布设以垂直和平行探槽为主,采取逐次掘进或相间平行排列的方式开挖。由于理想探槽位置的稀缺性,所以在这些优质的探槽点一定要开展长期详细地深入研究,最大限度获得古地震事件的长序列,同时也要注意新技术和新方法的应用。     

AS350B3型直升机在中高山航空物探测量中的优势

中高山地区作业的航空地球物理勘探飞行器需要有高原适航性。通过对比空中国王350ER在起降条件、最大升限、最大续航能力及高原机动能力等特点,提出了在中高山地区的低高度、大比例尺的航空地球物理勘探飞行器的选型原则及飞行方法。通过甘肃某测区的实际测量飞行验证了该原则和方法的可行性。分析结果显示,AS350B3型直升机在中高山地区作业时表现出的实际飞行性能满足在该类型区域低高度、大比例尺的航空地球物理勘探的要求。     

Petrology and PGE Abundances of High‐Cr and High‐Al Podiform Chromitites and Peridotites from the Bulqiza Ultramafic Massif,Eastern Mirdita Ophiolite,Albania

The Bulqiza ultramafic massif, which is part of the eastern Mirdita ophiolite of northern Albania, is world renowned for its high-Cr chromitite deposits. High-Cr chromitites hosted in the mantle section are the crystallized products of boninitic melts in a supra-subduction zone (SSZ). However, economically important high-Al chromitites are also present in massive dunite of the mantle-crust transition zone (MTZ). Chromian-spinel in the high-Al chromitites and dunites of the MTZ have much lower Cr# values (100Cr/(Cr+Al)) (47.7–55.1 and 46.5–51.7, respectively) than those in the high-Cr chromitites (78.2–80.4), harzburgites (72.6–77.9) and mantle dunites (79.4–84.3). The chemical differences in these two types of chromitites are reflected in the behaviors of their platinum-group elements (PGE). The high-Cr chromitites are rich in IPGE relative to PPGE with 0.10–0.45 PPGE/IPGE ratios, whereas the high-Al chromitites have relatively higher PPGE/IPGE ratios between 1.20 and 7.80. The calculated melts in equilibrium with the high-Cr chromitites are boninitic-like, and those associated with the high-Al chromitites are MORB-like but with hydrous, oxidized and TiO2-poor features. We propose that the coexistence of both types of chromitites in the Bulqiza ultramafic massif may indicates a change in magma composition from MORB-like to boninitic-like in a proto-forearc setting during subduction initiation.