中巴地球资源一号卫星CCD图像质量评价和交叉定标研究

使用定量分析方法评价了中巴地球资源卫星CCD相机遥感数据质量 ,在此基础上利用LANDSAT 7ETM 对CCD的对应波段进行交叉定标计算 ,得到了一组CCD的参考定标系数。在遥感数据质量评价研究中 ,使用统计分析方法计算得到了CCD相机图像数据的条纹强度 ;应用结构函数方法计算获得了CCD的噪声数据 ;通过功率谱计算 ,对比分析了CCD和LANDSAT 7ETM 对应波段图像空间纹理特征。该文通过交叉定标计算 ,得到了CCD相机前 4个波段的参考定标系数、动态范围和噪声等效反射率等参考指标 ,并对这组定标系数进行了验证 ,从验证结果中发现CCD1,2 ,3和LANDSAT 7ETM 对应波段反射率最大相差 1 98% ,最小0 0 3% ,平均差要低于 1 31% ,而波段 4最大也仅相差 4 4 1% ,平均差 3 0 2 % ,证明计算得到的交叉定标系数具有较高的参考价值     

集成高度和彩色纹理特征的影像目标模糊聚类识别方法

提出一种基于高度和彩色纹理信息的目标识别方法 ,其目的是提取具有相对高度的地物。由于传统二维纹理分析的方法往往不能有效地提取这类目标 ,本文把高度、色彩和纹理信息有机地结合起来 ,提高了识别率。依据影像提取结果 ,探讨了树林对森林覆盖地区自动空中三角测量选点的负面影响 ,同时建议采用数据分组的方案来改善森林覆盖地区自动空中三角测量的精度 ,并用对比实验证明了其有效性。     

Dust production and the release of iron oxides resulting from the aeolian abrasion of natural dune sands

Global dust trajectories indicate that signi?cant quantities of aeolian‐transported iron oxides originate in contemporary dryland areas. One potential source is the iron‐rich clay coatings that characterize many sand‐sized particles in desert dune?elds. This paper uses laboratory experiments to determine the rate at which these coatings can be removed from dune sands by aeolian abrasion. The coatings impart a red colour to the grains to which previous researchers have assigned variable geomorphological signi?cance. The quantities of iron removed during a 120 hour abrasion experiment are small (99 mg kg^?1) and dif?cult to detect by eye; however, high resolution spectroscopy clearly indicates that ferric oxides are released during abrasion and the re?ectance of the particles alters. One of the products of aeolian abrasion is ?ne particles (<10 µm diameter) with the potential for long distance transport. Copyright © 2004 John Wiley & Sons, Ltd.     

Knickpoint recession rate and catchment area: the case of uplifted rivers in Eastern Scotland

Knickpoint behaviour is a key to understanding both the landscape responses to a base‐level fall and the corresponding sediment fluxes from rejuvenated catchments, and must be accommodated in numerical models of large‐scale landscape evolution. Knickpoint recession in streams draining to glacio‐isostatically uplifted shorelines in eastern Scotland is used to assess whether knickpoint recession is a function of discharge (here represented by its surrogate, catchment area). Knickpoints are identified using DS plots (log slope versus log downstream distance). A statistically significant power relationship is found between distance of headward recession and catchment area. Such knickpoint recession data may be used to determine the values of m and n in the stream power law, E = KA^mSⁿ. The data have too many uncertainties, however, to judge definitively whether they are consistent with m = n = 1 (bedrock erosion is proportional to stream power and KPs should be maintained and propagate headwards) or m = 0·3, n = 0·7 (bedrock incision is proportional to shear stress and KPs do not propagate but degrade in place by rotation or replacement). Nonetheless, the E Scotland m and n values point to the dominance of catchment area (discharge) in determining knickpoint retreat rates and are therefore more consistent with the stream power law formulation in which bedrock erosion is proportional to stream power. Copyright © 2005 John Wiley & Sons, Ltd.     

Wood storage in a wide mountain river: case study of the Czarny Dunajec,Polish Carpathians

Storage of large woody debris in the wide, mountain, Czarny Dunajec River, southern Poland, was investigated following two floods of June and July 2001 with a seven‐year frequency. Within a reach, to which wood was delivered only by bank erosion and transport from upstream, wood quantities were estimated for eighty‐nine, 100 m long, channel segments grouped into nine sections of similar morphology. Results from regression analysis indicated the quantity of stored wood to be directly related to the length of eroded, wooded banks and river width, and inversely related to unit stream power at the flood peak. The largest quantities of wood (up to 33 t ha^?1) were stored in wide, multi‐thread river sections. Here, the relatively low transporting ability of the river facilitated deposition of transported wood while a considerable length of eroded channel and island banks resulted in a large number of trees delivered from the local riparian forest. In these sections, a few morphological and ecological situations led to the accumulation of especially large quantities of wood within a small river area. Very low amounts of wood were stored in narrow, single‐thread sections of regulated or bedrock channel. High stream power facilitated transport of wood through these sections while the high strength of the banks and low channel sinuosity prevented bank retreat and delivery of trees to the channel. Considerable differences in the character of deposited wood existed between wide, multi‐thread channel sections located at different distances below a narrow, 7 km long, channellized reach of the river. Wood deposited close to the downstream end of the channellized reach was highly disintegrated and structured into jams, whereas further downstream well preserved shrubs and trees prevailed. This apparently reflects differences in the distance of wood transport and shows that in a mountain river wider than the height of trees growing on its banks, wood can be transported long distances along relatively narrow, single‐thread reaches but is preferentially deposited in wide, multi‐thread reaches. Copyright © 2005 John Wiley & Sons, Ltd.     

Studies on wind environment around high buildings in urban areas

High buildings or architectural complex in urban areas remarkably distort the urban surface wind fields. As the air flow approaches,local strong wind may appear around the buildings. The strong wind makes the pedestrians on sidewalks, entrances and terrace very uncomfortable and causes the pedestrian level wind environment problem. In this studies, hot-wire wind measurement, wind scouring in wind tunnel and numerical computation were carried out to evaluate the wind environment of tall buildings in the prevailing flow conditions in Beijing areas. The results obtained by three techniques were compared and mutually verified. The conclusions drawn from three approaches agree with each other. Also the advantages and limitations of each method were analyzed. It is suggested that the combination of different techniques may produce better assessment of wind environment around high buildings.     

AutoCAD技术在道路工程施工测量中的应用

在道路建设中,通常分为几个标段同时施工,每个标段里一般包括路基及各种构造物,因此,施工测量任务十分繁重,由于全站仪在工程测量中的普遍应用,其极坐标放样功能使测量工作中出现错误主要为坐标计算错误,特别是具有记忆功能的全站仪,可以事先输入坐标,复核后再到现场放样。所以测量的主要工作就是根据施工图纸计算其各个部位的坐标,而如何快速、准确地计算坐标是关键所在。应用AutoCAD技术进行坐标定位计算,则可以做到事半功倍,并能取得良好的施工效果。     

“探宝号”船可变阵列震源的实现及应用

2001年，广州海洋地质调查局对“探宝号”船原有震源更新升级为阵列可变的BOLT震源系统。随着更新改造工程的成功，该船已成为具备承担高分辨率、常规、低频深水油气地震勘探的多功能地震调查船。本文介绍了地震勘探震源的基本工作原理以及三种阵列的分布、波形、频谱等特性。     

深直井旋转钻柱空转功率消耗的数学建模

通过对深井旋转钻柱空转功率消耗因素的分析，考虑空转时离心力作用在井壁上引起的摩擦力导致的功率消耗，并将钻井液视为牛顿液体，运用柱坐标系建立了旋转钻柱在深井作业条件下空转功率消耗的分析模型。综合考虑空转功率与钻柱旋转的角速度、钻柱与井眼结构参数、钻井液粘度系数等因素间的关系，即旋转钻柱运动过程中的离心力和钻井液作用在钻柱上的剪切应力对功率的影响，建立了更加符合实际工况的数学模型。     

乌江渡水电站岩溶地区高压灌浆施工特殊情况的处理

乌江渡水电站扩机地下厂房防渗帷幕工程身处岩溶发育地区，工程地质条件复杂，地质构造以层间错动断层为主，并有部分陡倾角断层发育,岩层受构造挤压强烈，断层、节理、破碎带发育；水平岩溶、垂直岩溶发育。以此工程为例介绍了高压灌浆施工工艺，阐述了岩溶地区高压灌浆过程中出现的特殊问题并提出了处理措施。