裂变径迹长度测量标准化研究——锆石蚀刻标准探讨

通过不同时间蚀刻的锆石径迹长度测量,确定海南迅速冷却火山型锆石的水平封闭径迹(HCT)平均长度L＝10.93 μm,标准偏差为0.93 μm,可作为锆石长度测量的参照标准.对锆石的蚀刻标准进行了探讨,确立垂直C轴的表面径迹宽度Dpar为(1.0±0.5)μm的蚀刻标准,要求Dpar>1 μm和Dpar<1 μm的颗粒数应大致相当,以及封闭径迹宽度DHCT<1.0 μm的测量标准.     

利用VB编程完成基点网联测中的各项计算

整套重力计算程序包括了除“地改”以外的所有项目的计算，在这篇文章中我们先仅介绍了“测区参数初始化”及“基点网联测”(采用三程小循环方式)的计算方法。“测区参数初始化”功能可生成gdw．csh初始化文件(该套程序的各项功能都要读取该文件中的相关参量)；“基点网联测”功能可计算基点网联测的各项精度，对联测进行平差，求出各分基点绝对重力值。     

高速公路软基加固质量的瑞利波检测与小波分析技术

论述了用瑞利波检测高速公路软基加固的一些主要技术问题,应用新兴的小波分析技术,改善和提高检测的质量,并通过福宁高速公路的实际检测结果,说明了其思路和方法的正确性、实用性.     

The gravity field and GGOS

The gravity field of the earth is a natural element of the Global Geodetic Observing System (GGOS). Gravity field quantities are like spatial geodetic observations of potential very high accuracy, with measurements, currently at part-per-billion (ppb) accuracy, but gravity field quantities are also unique as they can be globally represented by harmonic functions (long-wavelength geopotential model primarily from satellite gravity field missions), or based on point sampling (airborne and in situ absolute and superconducting gravimetry). From a GGOS global perspective, one of the main challenges is to ensure the consistency of the global and regional geopotential and geoid models, and the temporal changes of the gravity field at large spatial scales. The International Gravity Field Service, an umbrella “level-2” IAG service (incorporating the International Gravity Bureau, International Geoid Service, International Center for Earth Tides, International Center for Global Earth models, and other future new services for, e.g., digital terrain models), would be a natural key element contributing to GGOS. Major parts of the work of the services would, however, remain complementary to the GGOS contributions, which focus on the long-wavelength components of the geopotential and its temporal variations, the consistent procedures for regional data processing in a unified vertical datum and Terrestrial Reference Frame, and the ensuring validations of long-wavelength gravity field data products.     

森林沼泽景观区中大比例尺化探找矿工作方法的研究--记大梁金矿的发现

大梁金矿是通过森林沼泽景观区开展1：50000和1：25000地球化学测量及综合地质工作而发现的,证明采用的森林沼泽景观中大比例尺化探方法是行之有效的.     

Measurement of stream cross section using ground penetration radar with Hilbert–Huang transform

This study presents a new method to measure stream cross section without having contact with water. Compared with conventional measurement methods which apply instruments such as sounding weight, ground penetration radar (GPR), used in this study, is a non‐contact measurement method. This non‐contact measurement method can reduce the risk to hydrologists when they are conducting measurements, particularly in high flow period. However, the original signals obtained by using GPR are very complex, different from studies in the past where the measured data were mostly interpreted by experts with special skill or knowledge of GPR so that the results obtained were less objective. This study employs Hilbert–Huang transform (HHT) to process GPR signals which are difficult to interpret by hydrologists. HHT is a newly developed signal processing method that can not only process the nonlinear and non‐stationary complex signals, but also maintain the physical significance of the signal itself. Using GPR with HHT, this study establishes a non‐contact stream cross‐section measurement method with the ability to measure stream cross‐sectional areas precisely and quickly. Also, in comparison with the conventional method, no significant difference in results is found to exist between the two methods, but the new method can considerably reduce risk, measurement time, and manpower. It is proven that the non‐contact method combining GPR with HHT is applicable to quickly and accurately measure stream cross section. Copyright © 2013 John Wiley & Sons, Ltd.     

基于地性线分级的DEM信息量计算方法研究

主要对基于DEM提取的地性线进行信息量的定量分析,探讨地性线的信息量与分辨率、地形单元的关系。这个过程中首先利用河网的自相似理论研究与当前DEM所代表的地貌详细程度相适宜的地性线提取的阈值区间,并讨论此阈值下地性线的分级,以此为基础通过以该分级为权重进行DEM地形信息量的计算。实践证明,这种顾及地性线等级的DEM信息量计算方法能较准确地反映地性线的分布规律和不同等级的要素造成的信息量度量差异。     

车载移动测量系统应用于城市大比例尺地形图更新

将车载移动测量系统与城市大比例尺数字地形图测图相结合,成功地将车载移动测量系统运用于城市大比例尺测图更新应用中。通过在测区内布设靶标控制点,对比靶标的点云量算坐标与全站仪实测实际坐标,统计分析车载移动测量系统的测图精度。实验结果表明,车载移动测量系统能够满足城市大比例尺地形图测图要求。     

研习新时期地理信息系统中测量数据的管理方式

地理信息系统是把各种信息用地理以及相关的视图相结合,利用计算机及数据库技术对所需的信息进行收集和分析,经过分析和研究处理过的信息具有很高的使用价值,能够为土地利用、城市规划等各种大型工程提供数据参考。本文在简要阐述地理信息系统中测量数据管理问题的基础上,对新时期地理信息系统中测量数据管理的方式和优缺点及无缝空间数据管理的技术原理和优缺点进行了详细研究和分析。     

地基探测与NCEP GFS模式预报云量在ARM SGP站点对比

使用大气辐射测量实验(Atmospheric Radiation Measurements:ARM)在美国南部大平原站点(Southern Great Plains:SGP)长时间序列(2001 2010年)的地基主动遥感云(Active Remote Sensing of Clouds:ARSCL)和美国国家环境预报中心(National Centers for Environmental Prediction:NCEP)全球预报系统(Global Forecast System:GFS)模式预报资料,对比分析了两者云量在不同时间尺度内(年际、月份和季节)的差异。结果表明,GFS模式预报总云量为83.8%,略高于地基观测结果(78.1%);两者总云量差异在秋季最大(8.8%),春季最小(2.2%)。在低垂直高度分辨率(≥3 km)时,地基探测低云、中云和高云的云量分别为46.1%、43.5%和61.2%;模式预报三类云的云量均要高于地基探测的云量,差异分别为9.6%、17.2%和9.1%。但是,在高垂直分辨率(250 m)时,地基探测云量在大多数高度层上要高于模式预报结果。这应该是两种资料廓线中有云出现的高度层数目存在差异引起的。地基观测和GFS模式预报同时表明,SGP站点上空云量垂直廓线呈现双峰结构,在边界层附近(1 km)和上对流层区域(8-12 km)云量较大,2-3 km高度范围内云量较小。在春夏秋冬四个季节内,两种资料在低层边界层附近的最大云量偏差分别为9.5%、8.8%、7.8%和11.2%。