高位瓦斯抽放钻孔在降低综采工作面瓦斯浓度中的应用

林南仓属于低瓦斯矿井,但存在高瓦斯区域。煤层和采空区是瓦斯的主要来源,尤以采空涌出量大,给煤矿生产和安全带来了极大隐患。通过在1129综采工作面风道施工高位瓦斯孔,把钻孔打到采空区一侧煤层顶板以上冒落裂隙带内,用钻孔进行瓦斯抽放,使采空内的瓦斯通过裂隙带沿钻孔抽出,有效降低综采工作面瓦斯浓度,保证综采工作面正常回采和安全生产。     

开挖条件下含陡倾结构面顺层岩质边坡破坏模式与稳定性预测

顺层岩质边坡易发生失稳破坏,当边坡中发育有顺坡向陡倾结构面时,更不利于边坡稳定。以贵州某水电站大坝左岸含陡倾结构面顺层边坡为例,在综合分析地质条件及开挖扰动的基础上,结合离散元软件UDEC,分析了边坡的变形破坏模式和稳定性。研究结果表明,边坡可能发生的变形破坏模式主要有滑移、拉裂—滑移两种;自然状况下及开挖后,边坡都有沿断层f9、卸荷裂隙L1及岩层面发生滑移的趋势,且工程开挖导致边坡沿该结构面发生内部滑动;对边坡采用预应力锚索加固后,变形得到有效控制,位移数值计算值与实际监测值基本吻合。     

地基处理方案的模糊优化

本文首先分析了地基处理方案选择时的多层次因素关系树,然后利用模糊数学的原理对各个影响因素进行定量评价,从而使所选择的地基处理方案达到整体最优.     

纯球坐标系内各项重力校正值计算方案和计算过程

在国内,首次阐述了"纯球坐标系内各项重力校正值的计算方案和计算过程".该计算方案有如下优点:①以观测点P为中心,以球面距离am=am-1+Δa·bm-1(m=2,3,...,M)为半径将计算区划分为M个环带,再以Δλ0为由P点出发射线的角度间隔将所有环带等分为N (整数)份的计算区划分方案是最严密拼接,因而校正值的计算精度相当高.②在地形复杂和相对高差大的情况下,通过减小Δa、b和Δλ0 数值,可进一步提高计算精度.③可以直接采用带有经、纬度坐标的高程数据,进行大面积测区的各项重力校正值计算,而不受6°带和标准图幅限制.     

THE ‘NEW IMPLICIT METHOD’ FOR TUNNEL ANALYSIS

Tunnel excavation is a coupled three-dimensional problem dealing with two different structures: lining and rockmass. For a simple application it is useful to develop simplified methods by treating the problem as plane strain. If the problem of tunnel face advance presents an axisymmetric geometry, then we show that the major parameter governing the ground–interface–lining interaction is the convergence of the tunnel U₀ at the moment of the lining installation. The ‘New Implicit Method’ (NIM) presented in this paper makes use of principles similar to those of the ‘convergence–confinement’ method, but it provides a better appreciation of the coupled behaviour of rockmass and lining. For independent time constitutive laws (elasticity and plasticity), we point out that the convergence U₀ depends not only on the mechanical behaviour of the rockmass and on the distance from the tunnel face, as predicted by the ‘convergence–confinement’ method, but also on the stiffness of the lining previously set. We present the ‘NIM’ for elastic and perfect elastoplastic rockmasses without dilatancy for many criteria. The development of this new method is based on the results of tunnel calculations with an axisymmetric FEM numerical model that takes into account the three-dimensional aspect of the problem. Using this method is simple and its results agree well with the FEM numerical results. Its accuracy is highly satisfactory for a geotechnical study.     

楼层上钻孔灌注桩施工方案可行性分析

文华大厦因设计变更，需在已施工的楼层上施工钻孔灌注桩，通过对主要受力部分AB梁进行力学分析，以及对其进行加固，解决了楼层上钻孔灌注桩施工难题。     

流速逆变张量隐式求解方法及其在航道港池流场计算中的应用

运用高分辨率的边界适应网格进行流体动力学数值计算时,如何提高计算稳定性和减少计算量成为数值求解的关键性问题.在非正交的边界适应坐标系中,每个动量方程中同时出现了两个交叉方向的水位偏导数项,给隐式求解带来困难,而显式格式下的时间步长由于受与空间步长有关的Courant-Friedrichs-Lewy条件限制,计算量成倍增加.本文从广义曲线坐标系下浅海动力学方程组出发,导出了流速的逆变张量所满足的动量方程组,使方程中的水位偏导数项变成了沿某一协变基向量方向占优的形式,方便地采用了交替方向隐式差分格式,从而提高了计算稳定性并减小了计算量.本文通过对澳门海域航道和港池中流场的计算,证实了该模式是一种进行高分辩率数值计算的有效方法.     

Simulation and control of the linked systems of water quantity–water quality–socio-economics in the Huaihe River basin

Abstract

This work makes explicit an algebraic expression giving the matrix of transient influence coefficients associated with a one-dimensional semi-confined aquifer model. The domain studied is divided into a series of connected and completely mixed compartments over which the governing equation is discretized. The discrete equations obtained are solved for the compartmental hydraulic head and used to derive the algebraic expression in question. The basic properties of the so-called algebraic influence coefficients are investigated. In particular, their consistency with the exact Green function is highlighted. Finally, the newly derived influence coefficients are applied to a simplified aquifer system in order to formulate and solve the problem of identifying illegal groundwater pumping.     

Iterative implicit integration procedure for hybrid simulation of large nonlinear structures

A fully implicit iterative integration procedure is presented for local and geographically distributed hybrid simulation of the seismic response of complex structural systems with distributed nonlinear behavior. The purpose of this procedure is to seamlessly incorporate experimental elements in simulations using existing fully implicit integration algorithms designed for pure numerical simulations. The difficulties of implementing implicit integrators in a hybrid simulation are addressed at the element level by introducing a safe iteration strategy and using an efficient procedure for online estimation of the experimental tangent stiffness matrix. In order to avoid physical application of iterative displacements, the required experimental restoring force at each iteration is estimated from polynomial curve fitting of recent experimental measurements. The experimental tangent stiffness matrix is estimated by using readily available experimental measurements and by a classical diagonalization approach that reduces the number of unknowns in the matrix. Numerical and hybrid simulations are used to demonstrate that the proposed procedure provides an efficient method for implementation of fully implicit numerical integration in hybrid simulations of complex nonlinear structures. The hybrid simulations presented include distributed nonlinear behavior in both the numerical and experimental substructures. Copyright © 2010 John Wiley & Sons, Ltd.     

综放采空区特性与氧浓度分布关系研究

在现场束管监测实验的基础上,分析总结了综放采空区特性。根据计算流体力学原理,采用FLUENT数值模拟计算软件,针对综放采空区的不同特性,分别对采空区氧化带和窒息带的关键划分指标＂氧浓度＂进行数值模拟。将模拟结果与实测结果进行比较,讨论了在考虑综放采空区不同特性情况下的数值模拟结果对采空区自燃＂三带＂,即＂散热带＂、＂氧化带＂和＂窒息带＂划分的影响。结果表明,综放采空区特性对于氧浓度分布起着非常重要的作用,在数值模拟过程中必须予以考虑;忽略采空区特性的数值模拟结果与实测结果存在较大差异;模拟结果的精确与否取决于对问题的了解程度和边界条件的设定精度。