耗能-隔震柔性底层钢管混凝土-钢筋混凝土组合框架的实验研究

本文用钢管混凝土柱作为结构底层耗能柱、用承重墙和隔震器控制结构底层倒塌破坏,从而提出了一种新的耗能-隔震柔性底层结构体系。通过本文12根钢管混凝土柱和文献[7]中7根钢管混凝土柱的低周疲劳实验,初步确定了钢管混凝土柱地震损伤模型的参数;通过两个钢管混凝土-钢筋混凝土三层框架模型和一个纯钢筋混凝土三层框架模型的拟动力实验,研究和比较了两类结构体系的地震损伤。     

Further Studies Of Atmospheric Turbulence In Layers Near The Surface: Scaling The Tke Budget Above The Roughness Sublayer

The second of two experimental studies of the TKE budget conducted on sites of different roughness is described, and results are compared. The first took place within a shallow layer above a small field of mostly bare, cultivated soil; the second was carried out above a roughness sublayer of significant depth on an extensive plain of tall dry grass. Budget terms observed in the second study were scaled with a modified u which compensated for effects of an unusually large stress gradient and ensured that the _m functions would be collinear. By showing that the modification becomes negligible in smaller gradients, it is demonstrated that in normal conditions, budgets observed above significant roughness sublayers should be normalized by scaling in terms of the unreduced Reynolds stress at the sublayer's upper surface. This procedure is shown to be consistent with the expectation that TKE budgets in layers near the surface all scale in fundamentally the same way.Other findings include: (1) the fact that most _m functions previously reported are not quite collinear is attributed to a type of overspeeding known to affect three-cup anemometers; (2) revised _m functions, collinear and largely free of the effects of overspeeding, are determined from a well-established characteristic of the linear _m relation for the stable case; (3) data that define collinear _m functions can also be represented with single hyperbolic curves; (4) dissipation is found to be 10 to 15% too small to balance total TKE production in unstable and neutral conditions and to decrease with increasing z/L in thestable regime; and (5) new relations for based on the observed behaviour of the dissipation deficit provide an improved closure for the set of equations that express the budget terms as functions of _m and z/L.     

斜拉桥纵向设置粘滞阻尼器参数分析

采用Maxwell阻尼模型模拟了粘滞阻尼器的滞回耗能特性。通过对设置粘滞阻尼器斜拉桥纵向非线性地震反应的分析，讨论了粘滞阻尼器各参数对结构地震响应的影响，并通过计算证实了粘滞阻尼器具有良好的消能减振效果。     

On the nonlinear dynamics of the boundary layer of intense atmospheric vortex

The paper describes a stationary model of the boundary layer of a large-scale vortex. The model takes into account two types of nonlinearities: (1) advection of the momentum and centrifugal accelerations, that is related to large values of the Rossby number; (2) a nonlinear turbulent friction on the lower boundary (generally speaking, not only quadratic, but also more complicated). Nevertheless, the model may be studied analytically. This approach allows discovery and analysis of several universal regularities, which are not revealed by numerical modeling. The model provides the actual values for the speed of the surface wind and the angle of cross-isobar surface flow in the tropical cyclones.     

Effect of rod friction on vane shear tests in very soft organic harbour mud

Very soft organic harbour mud is increasingly used as a filling and construction material in harbour construction and reorganization. The undrained shear strength of such soft sediments is the critical geotechnical soil parameter with regard to any specific construction design. Field and laboratory vane shear testing is a standard method to quickly determine this important parameter. So far, the effect of rod friction on vane shear tests in very soft organic soils is unclear. In this study we present results from laboratory experiments on harbour mud from a construction site in northern Germany. Relations among vane and rod geometry, penetration depth, water content, rod friction and undrained shear strength are derived. Based on these relations the influence of rod friction on vane shear test results is investigated. The results indicate that field and laboratory vane shear test measurements may be significantly influenced by rod friction. Methods are proposed to correct for the rod influence, which is shown to increase with rising water contents.     

Physics of basic motions in asymmetric continuum

We consider the advantages of a formalism based on concept of the asymmetric continuum and we present some equivalence theorems relating it to the asymmetric elasticity and to micropolar and micromorphic theories as founded by Nowacki, Cosserats and Eringen. We consider the basic processes in an asymmetric continuum which could be reduced to the point basic motions/deformations. The co-action of spin and shear motions is assumed to play the main role in fracturing process, while the constitutive relation between the antisymmetric stresses and rotations replaces the friction constitutive law.     

Pure aluminium shear panels as dissipative devices in moment‐resisting steel frames

The use of energy dissipation systems for the seismic control of steel structures represents a valid alternative to conventional seismic design methods. The seismic devices currently employed are mostly based on the metallic yielding technology due to the large feasibility and efficiency they can provide. Within this context, in the current paper an innovative solution based on the adoption of low‐yield‐strength pure aluminium shear panels (SPs) for seismic protection of steel moment‐resisting frames is proposed and investigated. In order to prove the effectiveness of the system, a wide numerical study based on both static and dynamic non‐linear analyses has been carried out, considering a number of different frame‐to‐shear panel combinations, aiming at assessing the effect of the main influential parameters on the seismic response of the structure. The obtained results show that the contribution provided by aluminium SPs is rather significant, allowing a remarkable improvement of the seismic performance of the structure in terms of stiffness, strength and ductility, with the possibility to strongly limit the damage occurring in the members of moment‐resisting frames. In particular, it is clearly emphasized that the stiffening effect provided by SPs allows a more rational design procedure to be adopted, since the serviceability limit state check does not lead to unavoidable and uneconomical increase of the size of main structural members. Copyright © 2007 John Wiley & Sons, Ltd.     

某铁路大桥钻孔灌注桩工程性状浅析

通过对某铁路特大桥钻孔灌注桩单桩竖向静载荷试验、桩身轴力测试，探讨钻孔灌注桩侧摩阻力发挥的影响因素及荷载传递中的工程性状，为钻孔灌注桩的设计、施工提供参考。     

摩擦与粘性流体耗能器串联体系动力分析

采用粘性屈服模型来模拟摩擦耗能器的力－速度关系，建立了摩擦与粘性流体耗能器串联耗能体系的动力分析方法．为考虑框架杆件和支撑材料的几何非线性，采用增量型Ｒｏｓｅｎｂｒｏｃｋ二级三阶半隐式Ｒｕｎｇｅ－Ｋｕｔｔａ法求解动力方程．比较了仅有摩擦耗能器体系与串联组合耗能体系的减振效果，分析了粘性流体耗能器参数对组合耗能体系减振效果的影响。