秋冬气候变化对乌鲁木齐冬小麦播期的影响

通过对1976-2006年秋冬气候条件分析。得出鸟鲁木齐冬小麦冬前生长期间和越冬期间的气候条件发生了较明显的变化,表现为气温升高、降水减少、冬前〉0℃积温增加,越冬期初日后推,冬前生长期延长,越冬期间负积温减少。结果表明随着气候的变暖适当晚播更有利于冬小麦生长,冬小麦的适宜播种期应在传统播种期的基础上向后推迟一候左右。     

Acoustic-Gravity Waves from Bolide Sources

We have developed a new approach to modeling the acoustic-gravity wave (AGW) radiation from bolide sources. This first effort involves entry modeling of bolide sources that have available satellite data through procedures developed in ReVelle (Earth Moon Planets 95, 441–476, 2004a; in: A. Milani, G. Valsecchi, D. Vokrouhlicky (eds) NEO Fireball Diversity: Energetics-based Entry Modeling and Analysis Techniques, Near-earth Objects: Our Celestial Neighbors (IAU S236), 2007b). Results from the entry modeling are directly coupled to AGW production through line source blast wave theory for the initial wave amplitude and period at (at 10 blast wave radii and perpendicular to the trajectory). The second effort involves the prediction of the formation and or dominance of the propagation of the atmospheric Lamb, edge-wave composite mode in a viscous fluid (Pierce, J. Acoust. Soc. Amer. 35, 1798–1807, 1963) as a function of the source energy, horizontal range and source altitude using the Lamb wave frequency that was deduced directly during the entry modeling and that is used as a surrogate for the source energy. We have also determined that Lamb wave production by bolides at close range decreases dramatically as either the source energy decreases or the source altitude increases. Finally using procedures in Gill (Atmospheric-Ocean Dynamics, 1982) and in Tolstoy (Wave Propagation, 1973), we have analyzed two simple dispersion relationships and have calculated the expected dispersion for the Lamb edge-wave mode and for the excited, propagating internal acoustic waves. Finally, we have used the above formalism to fully evaluate these techniques for four large bolides, namely: the Tunguska bolide of June 30, 1908; the Revelstoke bolide of March 31, 1965; the Crete bolide of June 6, 2002 and the Antarctic bolide of September 3, 2004. Due to page limitations, we will only present results in detail for the Revelstoke bolide.     

副高外围影响下遵义市区域性暴雨的高空形势场特征研究

利用常规观测资料和NCEP1°×1°再分析资料,发现2007-2016年6～8月有8次区域性暴雨天气过程是由副高东退、引导高空槽东移的大尺度背景条件下,配合低层系统造成的,将其分类后得到三种类型：低涡槽型、高空槽气旋旋转型和高空槽低涡切变型;对每种类型的高空形势进行合成分析,找出了暴雨落区与高空系统、物理量配置之间的关系。     

毛乌素沙地3种飞播植物种群分布格局的研究

在播区水平和群落水平上,讨论了毛乌素沙地3种沙丘类型区飞播后,沙地由流动到半固定和固定状态的变化过程中,籽蒿、羊柴和花棒3个主要飞播植物种群分布格局的变化,以及各种状态下决定种群分布格局的主导因素。研究表明:在沙地处于流动状态下,不论是播区水平还是群落水平上,幼苗的分布格局都是由环境的空间异质性决定的;在半固定状态下,种群的分布格局是植物自身的生物生态学特性和环境因素共同作用的结果;而在固定状态下,种群的分布格局几乎全部是由植物自身的生物生态学特性所决定的。     

ESTIMATION OF ARTIFICIAL PRECIPITATION ENHANCEMENT RESOURCE CONDITION AND CLOUD SEEDING POTENTIAL BY GROUND-BASED REMOTE SENSING DATA*

In this paper,the data of continuous atmospheric vertical integral vapour and liquid water content during April-June of 1992-1994 obtained by a ground-based dual-channel microwave radiometer are used to analyse the statistical characteristics of atmospheric vapour and liquid water content,and the relative distribution characteristics of vapour and liquid water content in cloudy atmosphere,the correlative relation of integral liquid water content L and ground precipitation intensity I.and precipitation transform rate of precipitation system.Finally,the weather modification condition of precipitus stratiform clouds and seeding potential is analyzed and discussed.     

水稻旱育抛秧生长发育的动态模拟模型

通过分期播种田间试验资料,建立水稻旱育抛秧生长发育的动态模拟模型,包括叶面积发展,光合作用,呼吸作用,干物质积累与分配等。重点探讨叶面积发展与温度的关系,光合作用简化算法,净光含量的求算,分配系数随发育期的变化等。     

露采矿山宕口边坡绿化技术初探

针对矿山宕口边坡的现状,阐述了宕口边坡环境治理的步骤,宕口边坡的治理方法,介绍了原层基材喷附工程、植被工程,植被管理工程技术体系在矿山宕口边坡治理中的应用.对迅速建立符合绿化目标和自然植被演变规律、有效改善和恢复矿山宕口边坡的荒废生态系统,并与周边环境相协调的植被建设理论和方法,具有一定的借鉴价值.     

大气冰核谱分布对对流风暴云人工催化影响的数值模拟研究

2002年9月在青海省河南县人工增雨综合试验基地开展了人工增雨外场综合观测试验.根据这次实验得到的大气冰核资料,以及文献给出的另外两组常用的冰核资料,利用中国科学院大气物理研究所研制和发展的三维对流云人工催化数值模式,讨论了3类不同大气冰核谱环境对模拟对流风暴云人工催化增雨效果的影响,模式中还考虑了国内人工影响天气部门常用的RYI-6300型和WR-1B型人工增雨防雹火箭播云弹道的差异.模拟结果表明,3类不同大气冰核谱环境对模拟对流风暴云的宏观和微观参量分布结构有很大影响,在这些对流云中进行火箭播云催化试验得到的播云效果也有很大差异.大气环境中高温冰核浓度低,而低温冰核浓度高时,对流风暴云人工催化将导致云中冰晶过量,不利于对流风暴云降水增加.在大气环境中高温冰核浓度较高,并且低温冰核浓度较低时,对流催化风暴云可获得最高的人工增雨效果.在青海试验区的大气冰核谱环境下,火箭催化对流风暴云增雨有一定效果.对不同地区进行人工增雨作业时,了解清楚当地大气冰核的基本背景状况对于正确地评估播云效果非常重要.文中还给出了导致这些结果差异的物理解释.     

Comparison of vane shear and fall cone strengths of soft marine clay

A total of 1,014 measures of sediment shear strengths were measured by means of miniature vane shear and fall cone tests on five gravity cores collected in Eckernfo‐erde Bay, Baltic Sea. Paired t test was used to compare the shear strengths measured by the two methods. It was found that fall cone strength calculated with Wood's K₆₀value (0.29) overestimates the vane shear strength by 0.15 kPa (a = 0.001) and the sample mean of the fall cone strength is 4.1% higher than the mean of the vane shear strength. However, fall cone strength calculated with Hansbo's K₆₀ value (0.24) underestimates the vane shear strength by 0.88 kPa (a = 0.001), and the sample mean of the fall cone strength is 13.8% less than the mean of the vane shear strength. Both calculated fall cone strengths are significantly different from the vane shear strength, with a p value of less than 0.001. Regression analysis of the Echernfoerde Bay data indicates that a new K₆₀ value is 0.275 with a confidence interval (a = 0.01) from 0.2704 to 0.2786. Paired t test shows that there is no significant difference between miniature vane shear and fall cone tests for these samples if the fall cone strength is calculated with K₆₀ = 0.275.     

Progressive failure of sheeted rock slopes: the 2009–2010 Rhombus Wall rock falls in Yosemite Valley,California, USA

Progressive rock‐fall failures in natural rock slopes are common in many environments, but often elude detailed quantitative documentation and analysis. Here we present high‐resolution photography, video, and laser scanning data that document spatial and temporal patterns of a 15‐month‐long sequence of at least 14 rock falls from the Rhombus Wall, a sheeted granitic cliff in Yosemite Valley, California. The rock‐fall sequence began on 26 August 2009 with a small failure at the tip of an overhanging rock slab. Several hours later, a series of five rock falls totaling 736 m³ progressed upward along a sheeting joint behind the overhanging slab. Over the next 3 weeks, audible cracking occurred on the Rhombus Wall, suggesting crack propagation, while visual monitoring revealed opening of a sheeting joint adjacent to the previous failure surface. On 14 September 2009 a 110 m³ slab detached along this sheeting joint. Additional rock falls between 30 August and 20 November 2010, totaling 187 m³, radiated outward from the initial failure area along cliff (sub)parallel sheeting joints. We suggest that these progressive failures might have been related to stress redistributions accompanying propagation of sheeting joints behind the cliff face. Mechanical analyses indicate that tensile stresses should occur perpendicular to the cliff face and open sheeting joints, and that sheeting joints should propagate parallel to a cliff face from areas of stress concentrations. The analyses also account for how sheeting joints can propagate to lengths many times greater than their depths behind cliff faces. We posit that as a region of failure spreads across a cliff face, stress concentrations along its margin will spread with it, promoting further crack propagation and rock falls. Published in 2012. This article is a US Government work and is in the public domain in the USA.