Strong interplanetary field enhancements at Ulysses—evidence of dust trails' interaction with the solar wind?

Interplanetary field enhancements were first discovered in the vicinity of Venus. These events are characterised by an increase in the magnitude of the heliospheric magnetic field with a near-symmetrical, sometimes thorn-shaped profile, and last from minutes to hours. Surveys of the events near Venus and Earth indicated clustering of the events in inertial space, which suggested that their sources were Solar System objects other than the Sun. A survey is presented of strong events of this type detected by the Ulysses spacecraft from 1990 to late 2001. Most of the events are accompanied by a discontinuity in the field direction near the events' centres. Other discontinuities are often symmetrical about the enhancement. The majority of events last less than two hours. When examined as a whole, the events tend to be accompanied by subtle changes in some plasma parameters. The majority of the enhancements are accompanied by magnetic holes on their fringes. The enhancements' occurrence rate increases with decreasing heliocentric distance. Possible formation mechanisms are discussed. No link was found with solar, or solar wind sources. Several aspects of the survey results are consistent with an origin related to cometary dust trails. Possible processes associated with a dust-solar wind interaction are discussed.     

Diffuse Galactic light at high Galactic latitude: nature and interpretation

The hypothesis of an extended red emission (ERE) in diffuse Galactic light (DGL) has been put forward in 1998 by Gordon, Witt & Friedmann who found that scattered starlight was not enough to explain the amount of DGL in the R band, in some high Galactic latitude directions. This paper re-investigates, for high Galactic latitudes, the brightnesses and colours of DGL, integrated star and galaxy light (ISGL), and of the total extrasolar light (ISGL+DGL) measured by Pioneer. Under the traditional assumption that DGL is forward scattering of background starlight by interstellar dust on the line of sight, ISGL and Pioneer have very close colours, as it is found by Gordon, Witt & Friedmann. Pioneer observations at high |b| thus accept an alternative and simple interpretation, with no involvement of ERE in DGL.     

Characteristics of Light Transmission in Summer and Winter and Its Relation to Sediment Transport in the East China Sea

INTRODUCTIONTheSubeiShoalandtheChangjiangRiverestuarineareainthewestoftheHuanghaiandEastChinaSeasisoneofthemarginalseasintheworld ,wheresuspendedmatterisextremelyhigh .Here ,notonlyistheretheTaiwanWarmCurrentoneoftheKuroshio’sbranchesintheEastChinaSea,butalsotheHuanghaiCoastalCurrent,andChangjiangDilutedWater.Sothestrongmixingbetweenthecoastalandoffshorewaterscomplicatessuspendedmatterdistributioninthisarea.HowthesuspendedmatterdischargedfromtheChangjiangRiverandtheabandonedHuan…     

Hysteresis‐based analysis of overland metal transport

Introducing a concept of equivalent mass depth of flow, this study describes the phenomenon of non‐point source pollutant (metal) transport for pavement (or overland) flow in analogy with wave propagation in wide open channels. Hysteretic and normal mass rating curves are developed for runoff rate and mass of 12 dissolved and particulate‐bound metal elements (pollutants) using the rainfall‐runoff and water quality data of the 15 × 20 m² instrumented pavement in Cincinnati, USA. Normal mass rating curves developed for easy computation of pollutant load are found to be of a form similar to Manning's, which is valid for open channel flows. Based on the hysteresis analysis, wave types for dissolution and mixing of particulate‐bound metals are identified. The analysis finds that the second‐order partial‐differential equation normally used for metal transport does not have the efficacy to describe fully the strong non‐linear phenomena such as is described for various metal elements by dynamic waves. In addition, the proportionality concept of the popular SCS‐CN concept is extended for determining the potential maximum metal mass M_p of all the 12 elements transported by a rain storm and related to the antecedent dry period (ADP). For the primary metal zinc element, M_p is found to increase with the ADP and vice versa. Copyright © 2003 John Wiley & Sons, Ltd.     

Sediment transport in analogue flume models compared with real‐world sedimentary systems: a new look at scaling evolution of sedimentary systems in a flume

Evolution of sedimentary systems at large temporal and spatial scales cannot be scaled down to laboratory dimensions by conventional hydraulic Froude scaling. Therefore, many researchers question the validity of experiments aiming to simulate this evolution. Yet, it has been shown that laboratory experiments yield stratigraphic responses to allocyclic forcing that are remarkably similar to those in real‐world prototypes, hinting at scale independency with strong dependence on boundary conditions but weak dependence on the actual sediment transport dynamics. This paper addresses the dilemma by contrasting sediment transport rules that apply in the laboratory with those that apply in real‐world geological systems. It is demonstrated that the generation of two‐dimensional stratigraphy in a flume can be simulated numerically by the non‐linear diffusion equation. Sediment transport theory is used to demonstrate that only suspension‐dominated meandering rivers should be simulated with linear diffusion. With increasing grain‐size (coarse sand to gravel) and shallowness of river systems, the prediction of long‐term transport must be simulated by non‐linear, slope‐dependent diffusion to allow for increasing transport rates and thus change in stratigraphic style. To point out these differences in stratigraphic style, three stages in infill of accommodation have been defined here: (i) a start‐up stage, when the system is prograding to base level (e.g. the shelf edge) with no sediment flux beyond the base‐level point; (ii) a fill‐up stage, when the system is further aggrading while progressively more sediment is bypassing base level with the progression of the infill; and (iii) a keep‐up stage, when more than 90% of the input is bypassing the base level and less than 10% is used for filling the accommodation. By plotting the rate of change in flux for various degrees of non‐linearity (varying the exponent in the diffusion equation) it was found that the error between model and real‐world prototype is largest for the suspension‐dominated prototypes, although never more than 30% and only at the beginning of the fill‐up stage. The error reduces to only 10% for the non‐linear sandy‐gravelly and gravelly systems. These results are very encouraging and open up ways to calibrate numerical models of sedimentary system evolution by such experiments.     

TEM evidence for intracellular accumulation of lead by bacteria in subsurface environments

We monitored near-surface atmospheric fallout (15-cm above ground) and soil solution (at 15, 35 and 55 cm below ground) derived nanoparticles over an 8-month period by collecting the particles directly onto TEM grids in anthropogenically-influenced (vineyard) and pristine (native forest) sites in France. Particle clusters trapped on the grid were selected randomly and individual particles were binned into eight different groups (euhedral clays, weathered clays, salts, oxi-hydroxides, bacteria, non-living organic matter, aggregates and undetermined). Bacteria represent 9–23% of the collected nanoparticle area (ave. 9.4% and 18% for two atmospheric collection sites and ave. 23% for soil infiltration samples). Bacteria were most often associated with non-living organic matter and comprised a variety of morpho-types. Interestingly, 45% of all the bacteria analyzed by transmission electron microscopy and electron dispersive spectroscopy (TEM-EDX) showed the presence of intracellular grains significantly enriched in lead and phosphorus. Intracellular sequestration of Pb into polyphosphate bodies has been observed in the laboratory, but this is the first observation of this phenomenon in a natural environment. Furthermore, this suggests that microbial-bound Pb may be an important transport mechanism in subsurface environments.     

Delineation of groundwater protection zones by the backward particle tracking method: theoretical background and GIS-based stochastic analysis

The backward particle tracking method, an effective and powerful tool that can be used to delineate groundwater protection zones, is presented. The theoretical background and insights on the applicability of this method are provided. Moreover, the present work enriches the backward particle tracking method with an uncertainty analysis concerning the porosity values, applying a Monte Carlo (MC) approach, coupled with the use of geographical information systems (GIS). As an application example, a wellfield in the Komotini area, Greece, is investigated. The present study may serve as a potential guideline for wellfield delineation, particularly in areas like Greece where lack of data related to the hydrogeological system is often a problem.     

Numerical modeling assessment of three-gate structures for capturing contaminated groundwater

This modeling study evaluated the capability of alternative funnel-and-gate structures with three gates for capturing contaminated groundwater in a hypothetical unconfined aquifer. Simulated interceptor structures were linear and 45 m wide, consisting of three gates and two funnels (walls). One gate occupied the center and two gates occupied the ends of the interceptor structures. The structures, positioned perpendicular to regional groundwater flow, traversed the entire thickness of the aquifer. A total of four structures were evaluated (numbers designate widths of end, center, and end gates, respectively, in meters): 3-3-3, 2-5-2, 1-7-1, and 4-1-4. Particle tracking and zonal water budgets identified shapes of capture zones and discharge patterns for each interceptor structure. A mass transport model, accounting for advection and hydrodynamic dispersion, tested the capability of each structure for capturing a contaminant plume. Results suggest that: time-dependent capture zones underestimate the amount of time to capture a contaminant plume, wide center gates facilitate plume capture, and wide end gates facilitate lateral containment of contaminants. Of the structures simulated, the 2-5-2 configuration was relatively efficient at processing and containing the simulated contaminant plume.     

Determination of historical emission of heavy metals into the atmosphere: Celje case study

The research shows that in the Celje area (Slovenia), the historical anthropogenical emissions are 1,712 tons of Zn and 9.1 tons of Cd. For Zn, this value represents approximately 0.3% of the total Zn production in that area. Close to the former zinc smelting plant, the “Zn precipitation” has been estimated to be up to 0.036 mm. The 100-year Zn production left behind a heavily contaminated area with maximum concentrations of Zn of up to 5.6% in attic dust and 0.85% in the soil, and 456 mg/kg of Cd in attic dust and 59.1 mg/kg in the soil. The calculation of historical emissions is based on the data of heavy metals concentration in the attic dust at 98 sampling points and on the data from 19 measurement sites of the weight of total monthly air deposit. The main idea behind determining past emissions is that when the weight of the deposited dust on a small area is multiplied by the concentration of the element in that area, the mass of the polluter which has been transported to the place of interest by air can be calculated. If we sum up all the weight over the whole geochemical anomaly, we get the quantity of historical emissions.