利用谱聚类方法研究新丰江库区的震源机制解

为检验震源机制解谱聚类方法的实用性,选择新丰江库区为研究区域,利用FOCMEC方法反演了该区域2012年1月1日—2018年12月31日M_L2.0以上地震的震源机制解,并对其进行了谱聚类分析,最终获得该区域7种震源机制解类型;通过分析每种类型的震源机制解特征及其时空分布特征,探讨了震源机制解类型分布与区域构造的关系。结果表明:(1)新丰江库区地震破裂类型以正断型为主,兼有部分倾滑分量,其次为走滑型;(2)不同类型的震源机制解具有区域性的空间分布特征,主要受不同的构造背景影响,反映了新丰江库区地震活动和构造特征之间的关系;(3)不同类型震源机制解所描述的断裂分布反映了峡谷及大坝区库水渗透的构造条件,解释了区域地震频发的可能原因;(4)每种类型的震源机制解在研究时间范围内数量变化较为稳定。     

On the mechanism of resorption zoning in metamorphic garnet

Abstract An analytical electron microscope study of almandine garnet from a metamorphosed Al–Fe‐rich rock revealed detailed composition profiles and defect microstructures of resorption zoning along fluid‐infiltrated veins and even into the garnet/ilmenite (inclusion) interface. This indicates a limited volume diffusion for the cations in substitution (mainly Ca and Fe) and an interface‐controlled partition for the extension of a composition‐invariant margin. A corrugated interface between the Ca‐rich margin/zone and the almandine garnet core is characterized by dislocation arrays and recovery texture further suggesting a resorption process facilitated by diffusion‐induced recrystallization, diffusion‐induced dislocation migration and diffusion–induced grain boundary migration. Integrated microstructural and chemical studies are essential for understanding the underlying mechanisms of processes such as garnet zoning and its modification. Without this understanding, it will not be possible to reliably use garnet compositions for thermobarometry and other applications that rely on garnet chemical information.     

新疆及周缘构造破裂特征及地震序列类型

横亘新疆境内的天山及其周边的西昆仑、阿尔金和阿尔泰是中国大陆著名的强构造运动区和地震活动带。在对新疆构造区应力环境、动力过程、断层运动变形特征和地震序列分析讨论的基础上,对新疆及其周缘主要构造区地震破裂方式和序列类型进行研究,得出如下结论:(1)西昆仑构造区受来自青藏块体和塔里木块体NS和NW向水平压应力和垂向力的作用,构造运动呈现出走滑与逆冲特征,震源破裂以走滑型为主,数量较少的逆断型地震主要分布在西昆仑帕米尔一侧的深震挤压区,正断型地震主要出现在西昆仑与阿尔金交汇的拉张盆地及附近。该区主余型地震占63%,6级以上地震序列也存在多震类型。(2)阿尔金断裂带位于西昆仑北缘断裂和北祁连断裂过渡带,受青藏块体向北和向西的推挤,断裂本身的左旋位移量通过两端逆冲挤压而转化,使得青藏高原北边界不断向外扩展。在此力源下,阿尔金断裂带震源破裂以走滑为主,也有少量的逆冲型地震。地震序列中主余型和孤立型地震占比相同(占44%)。(3)在印度板块和亚欧大陆碰撞效应影响下,天山地区产生近NNE向水平压应力,构造运动显现出带旋性特征的逆冲和走滑,震源破裂方式与之相吻合。而天山构造大跨度的空间展布、扩展形式的多样性和地震破裂的两重性,又影响到地震序列类型的多样性,使得主余型、孤立型和多震型地震在不同构造部位呈现优势分布。(4)阿尔泰的构造运动可能受到了来自印度板块与亚欧板块碰撞的远程效应和西伯利亚块体南向运动的双向影响,形成NNE和SW向水平挤压力,主要大型发震断裂做右旋剪扭错动,而一些深断裂则以逆冲运动为主。震源破裂呈现出走滑(占64%)和部分的逆冲(占27%),6级以上地震序列主要为主余型,5级左右地震则多为孤立型。     

基于三维激光扫描的堆积体滑坡变形机理及阈值模型试验研究

为分析白龙江流域舟曲段江顶崖滑坡的变形演化机理及其阈值,设计降雨条件下的大型堆积体滑坡物理模型试验,采用FARO FocusS 350三维激光扫描仪进行滑坡数据采集、处理,获取滑坡在不同降雨工况的点云模型数据,对比分析不同降雨工况下滑坡宏观及局部特征点的变化情况。研究表明：滑坡模型表面出现持续、快速、变化鲜明的整体变形特征,伴随出现滑坡模型中、前部横向、纵向的张拉裂缝,表明在非饱和渗流影响下,堆积体滑坡模型的基质吸力降低、孔隙水压力以及滑坡体重力荷载增加,导致滑坡模型临近失稳;根据滑坡模型宏观变形情况,其变形演化过程可划分为：初始变形阶段、等速变形阶段和加速变形阶段,3个不同变形阶段坡体宏观变形各自有其特点。通过对试验阶段的变形特征分析,设立了滑坡变形速率阈值,分别为0.01 m/h、0.02 m/h、0.2 m/h。基于三维激光扫描技术坡体监测,结合坡体变形宏观和局部分析的优势,在保证高精度监测、采集、处理的同时,得到坡体的整体变形和位移。     

陆海统筹背景下海域综合管理探析

文章分析当前海域管理面临的形势,并剖析当前存在的管理问题,提出管理的总体目标和改革意见措施,同时对当前海域使用管理法修订、新一轮国土空间规划制定、围填海管控、海岸线保护与利用管理、养殖用海管理等主要工作提出管理建议。建议包括：构建基于生态系统的海域综合管理机制,深入落实生态文明建设总要求;开展海域资源本底调查,为深化综合管理奠定基础;整合涉海规划,发挥陆海统筹作用;发挥指标调控作用,实施市场化配置;调控产业用海,充分发挥海域资源最大效益;加大整治修复力度,恢复区域生态功能;打破部门间壁垒,形成监管闭环。     

新时代国土空间规划中陆海统筹的重点内容和实现路径

新时代国土空间规划是未来可持续发展的空间蓝图。陆地与海洋作为国土空间的两大主体,落实陆海统筹战略、推进生态保护和高质量发展已成为沿海地区国土空间规划编制的重要内容。文章阐述陆海统筹的重点内容并分析其实现路径,研究结果有助于推动陆海统筹在国土空间规划中的有效落实,提升国土空间规划编制的科学性。研究结果表明在新时代背景下,可从6个方面实现陆海统筹:有机衔接陆海主体功能,统筹协调岸线两侧矛盾,统筹塑造陆海空间格局;统筹规划陆海自然资源的保护与开发;统筹布局和协调发展陆海产业;建立陆海一体的交通和防灾支撑体系;开展陆海协同的生态环境保护与修复治理;建设陆海统筹的管理体制机制。     

云南纳帕海岩溶湿地生态环境变化及驱动机制

利用原状土就地取样野外定位研究方法,对云南西北高原的纳帕海岩溶湿地生态环境状况进行的2年定位研究表明,纳帕海湿地生态环境破坏严重,表现为湿地面积不断缩小,沼泽类型改变,沼泽旱化、沙化,中旱生植物侵入,沼泽发生逆向生态演替,生物多样性减少,土壤养分衰减退化,土壤酶活性降低,水质变劣.分析了引起纳帕海湿地环境变化的自然因素和人为因素,表明人为活动干扰是引起其湿地生态环境退化的主要原因.     

Pile driving by numerical cavity expansion

A cavity expansion procedure for the simulation of pile driving is presented and assessed in this paper. The analysis uses a non-linear finite-element model and the penetration of the pile into the soil is simulated by a radial opening of the soil around the pile. The case of a pile advanced by expansion will be compared to a similar pile subjected to computational driving (referred to, respectively, as ‘expanded’ and ‘driven’ piles for convenience). The state of stress and deformation, and the evolution of pore-water pressure in the soil will be monitored for the expanded and driven piles. Further computational driving will be applied to both cases and the pile response and soil resistance will be compared. The computational cost of advancing the pile by expansion will finally be investigated. Copyright © John Wiley & Sons, Ltd.     

USE OF SEISMIC WAVEFORMS AND INSAR DATA FOR DETERMINATION OF THE SEISMOTECTONICS OF THE MAINLING MS6.9 EARTHQUAKE ON NOV.18, 2017

On November 18, 2017, a M_S6.9 earthquake struck Mainling County, Tibet, with a depth of 10km. The earthquake occurred at the eastern Himalaya syntaxis. The Namche Barwan moved northward relative to the Himalayan terrane and was subducted deeply beneath the Lhasa terrane, forming the eastern syntaxis after the collision of the Indian plate and Asian plates. Firstly, this paper uses the far and near field broadband seismic waveform for joint inversion (CAPJoint method)of the earthquake focal mechanism. Two groups of nodal planes are obtained after 1000 times Bootstrap test. The strike, dip and rake of the best solution are calculated to be 302°, 76° and 84° (the nodal plane Ⅰ)and 138°, 27° and 104° (the nodal plane Ⅱ), respectively. This event was captured by interferometric synthetic aperture radar (InSAR)measurements from the Sentinel-1A radar satellite, which provide the opportunity to determine the fault plane, as well as the co-seismic slip distribution, and assess the seismic hazards. The overall trend of the deformation field revealed by InSAR is consistent with the GPS displacement field released by the Gan Wei-Jun's team. Geodesy (InSAR and GPS)observation of the earthquake deformation field shows the northeastern side of the epicenter uplifting and the southwestern side sinking. According to geodetic measurements and the thrust characteristics of fault deformation field, we speculate that the nodal plane Ⅰ is the true rupture plane. Secondly, based on the focal mechanism, we use InSAR data as the constraint to invert for the fine slip distribution on the fault plane. Our best model suggests that the seismogenic fault is a NW-SE striking thrust fault with a high angle. Combined with the slip distribution and aftershocks, we suggest that the earthquake is a high-angle thrust event, which is caused by the NE-dipping thrust beneath the Namche Barwa syntaxis subducted deeply beneath the Lhasa terrane.     

The sedimentary characteristics and formation mechanism of shell ridges along the southwest coast of Bohai Bay

The present paper studies the sedimentary characteristics and mechanism of the shell ridges on the southwestern coast of Bohai Bay, which are the largest and have the highest shell (or shell fragment) content in the world. These shell ridges are composed of two sedimentary subfacies: the ridge subfacies and the ridge infill subfacies with different inner textures and sedimentary structures. The ridge subfacies primarily consists of fresh shells and/or shell fragments with parallel beddings and high-angle oblique beddings. The ridge infill subfacies consists of finer shell fragments and silty sand with parallel beddings oblique to land. The evolution of the shell ridge is controlled by the accumulation of substantial shell material,the relative slow erosion of shoreline, storm waves, winds and the shift of river routes. Wind tunnel tests indicate that the critical movement velocity of shell is lower than that of quartz sand of the same grain size. Deltaic progradation alternates with shell ridge growth. While the Yellow River empties into the sea through this area, accompanied by deltaic progradating, the shell material is scarce, which is unfavorable to the growth of the shell ridge. Conversely, erosion occurs along an abandoned delta coast where a shell ridge may develop, e.g. the shell ridge on the southwest of Bohai Bay.