Discretization approach in integrated Hydrologic Model for surface and groundwater interaction

The commonly used discretization approaches for distributed hydrological models can be broadly categorized into four types,based on the nature of the discrete components:Regular Mesh,Triangular Irregular Networks(TINs),Representative Elementary Watershed(REWs) and Hydrologic Response Units(HRUs).In this paper,a new discretization approach for landforms that have similar hydrologic properties is developed and discussed here for the Integrated Hydrologic Model(IHM),a combining simulation of surface and groundwater processes,accounting for the interaction between the systems.The approach used in the IHM is to disaggregate basin parameters into discrete landforms that have similar hydrologic properties.These landforms may be impervious areas,related areas,areas with high or low clay or organic fractions,areas with significantly different depths-to-water-table,and areas with different types of land cover or different land uses.Incorporating discrete landforms within basins allows significant distributed parameter analysis,but requires an efficient computational structure.The IHM integration represents a new approach interpreting fluxes across the model interface and storages near the interface for transfer to the appropriate model component,accounting for the disparate discretization while rigidly maintaining mass conservation.The discretization approaches employed in IHM will provide some ideas and insights which are helpful to those researchers who have been working on the integrated models for surface-groundwater interaction.     

一种新的基于相关性的层次型分布式入侵检测模型

针对传统的分布式入侵检测模型的局限性,提出了一种新的基于相关性的层次型分布式入侵检测模型,有效地解决分布式模型中通信代价和检测准确性的矛盾。核心思想是:检测代理间的协作程度应该和其相关性成正比。通过量化检测代理间的相关性,将整个分布式系统分割成多个高度相关的子系统,而子系统间通过动态代言人机制进行协作,有效地减少分布式系统中低价值的通信。最后从理论上证明了有效性和高效性。     

中国三种太阳辐射起始数据分布式模拟

天文辐射、干洁大气总辐射和湿洁大气总辐射是太阳辐射模拟的3种重要起始数据。依托Iqbal Model C和起伏地形下干/湿洁大气总辐射模型,实现了水平面和起伏地形下干/湿洁大气总辐射分布式模拟。以DEM数据作为地形的综合反映,结合常规气象资料,计算了水平面和起伏地形下中国1 km×1 km分辨率日天文辐射量、干洁大气总辐射量、湿洁大气总辐射量的空间分布,并对3种太阳辐射起始数据的时空分布特征做了对比分析。结果表明：3种辐射量均遵循随纬向变化的宏观分布规律;水平面干/湿洁大气总辐射量的分布体现了海拔的影响,水平面湿洁大气总辐射量的分布还体现了水汽分布的影响;起伏地形下的3种辐射量能很好的体现坡度、坡向和地形之间相互遮蔽等局部地形特征对辐射量的影响;以干/湿洁大气总辐射作为起始数据,将有助于提高太阳总辐射的模拟精度。     

岩溶塌陷光纤传感试验装置的标定试验

根据岩溶土洞(塌陷)变形演化特点,分析土体与传感光纤之间的力学关系,简化塌陷力学模型,加工塌陷模拟试验装置并进行试验。首先通过对光纤加载和卸载来模拟土洞形成过程顶板荷载的变化及分析传感光纤相应的变形和轴向应变特点,然后研究了土洞规模变化对光纤传感监测的影响。研究表明:在土洞形成过程中,因土洞规模和上覆土层荷载不一而导致的应力场的分布变化,以及不同光缆对应力场变化响应灵敏性的差异,是影响分布式光纤传感技术在岩溶土洞中应用的关键因子。文中所标定的光纤传感试验装置能较好地显示岩溶土洞形成演化过程中的应变变化特征,说明分布式光纤传感技术可应用于岩溶土洞的监测预警。      

分布式光纤测温技术在黑河中游地表水与地下水转换研究中的应用

本研究首次应用分布式光纤测温技术,监测张掖市临泽县平川段的黑河河床表面温度与河水温度,确定了该时段黑河中游湿地临泽平川段的地表水地下水转换情况。分布式光纤测温系统温度分辨率为0.01℃,采样间距为0.25m,时间间隔为4min。通过对全长550m的河床表面温度与河水温度连续监测,分析该区段温度场动态,发现试验区河段河流受地下水补给,有地下水溢出带。通过河床表面温度与河水温度、环境温度的对比,清楚反映了该河段温度异常带的分布与变化规律,明确了地下水溢出带的位置与地下水溢出强度。     

Erosion rates and sediment budgets in vineyards at 1-m resolution based on stock unearthing (Burgundy, France)

A new and simple method is developed to efficiently quantify erosion and deposition rates based on stock unearthing measurements. This is applicable to spatial scales ranging from plot to hillslopes, and to time scales ranging from single hydrologic events to centennial scales. The method is applied to a plot area on vineyard hillslopes in Burgundy (Monthélie, France), with measurement of 4328 vine plants. A sediment budget established at the plot scale shows a mean soil lowering of 3.44 ± 1 cm over 20 years, involving a minimal erosion rate of 1.7 ± 0.5 mm yr^− 1. Locally, erosion rates can reach up to 8.2 ± 0.5 mm yr^− 1.This approach allows the sediment redistribution to be mapped and analyzed at 1-m resolution. It provides novel insights into the characterization of erosion patterns on pluri-decennial scales and into the analysis of spatial distribution of erosion processes on cultivated hillslopes.     

Estimation of snow density using full-polarimetric Synthetic Aperture Radar (SAR) data

In this paper, a new snow density estimation methodology is proposed for full-polarimetric Synthetic Aperture Radar (SAR) data. The generalized four component polarimetric decomposition with unitary transformation (G4U) based generalized volume parameter is utilized to invert snowpack dielectric constant using the Fresnel transmission coefficients. The snow density is then estimated using an empirical relationship. Six Radarsat-2 fine resolution full-polarimetric C-band datasets were acquired over Himachal Pradesh, India. The near-real time in-situ measurements were collected with the satellite pass to validate the proposed method. The mean absolute error (MAE) of the proposed method is 0.027 g cm⁻³ and the root mean square error (RMSE) is 0.032 g cm⁻³. The snow density variation within a season were also analyzed using multi-temporal Radarsat-2 data.     

GB-SAR导轨倾角引起的影像坐标投影变换误差分析

依据GB-SAR传感器运行导轨与成像投影面的空间关系,分别推导了导轨中心线俯仰角和横轴侧倾角所引起的成像投影误差的计算公式。计算结果表明,导轨安装定位时产生的俯仰角通常可以忽略不计,而成像投影误差对导轨横轴的侧倾角更为敏感。在GB-SAR连续变形监测应用中,导轨的横向姿态需做严格控制,确保其水平度。     

一种改进的SAR影像边缘检测方法

由于SAR影像具有乘性相干斑噪声,某些对光学影像有较好检测性能的边缘检测算子,对于SAR影像并不适用,因此本文提出了一种将改进后的Ratio算子与Canny算子相组合的新方法。首先采用多种客观评价指标,得出经典方法中的Lee滤波能有效去除噪声,且最大限度保留了梯度信息,适用于边缘检测;然后对边缘检测具有恒虚警特性的Ratio算子进行改进,改进后的算子更利于影像归一化处理;最后利用改进后的Ratio算子与Canny算子组合成新方法。试验结果证明,组合后的新方法显著提高了边缘检测正确率和定位精度,改善了边缘连续性,具有一定的有效性和实用性。     

Optical Dating Equivalent Dose (De) Comparison of Global Standardised Growth Curve (gSGC) and Single-aliquot Regenerative-dose (SAR) Methods for Quartz Grains

Optical dating is a method of measuring the time since the sample was buried from last thermal event or light exposure. Samples such as quartz and feldspar grains are the most commonly used sediment of measurement. Single-Aliquot Regenerative-dose (SAR) method has become the most acceptable procedure for obtaining the equivalent Dose (D_e) of a sample. The Standardised Growth Curve (SGC) method provides a possible procedure for measuring a large number of samples; the limitation is that the growth curve fitted by different samples or even different aliquots is divergent. The global Standardised Growth Curve (gSGC) method improves the shortage by normalizing the dose response curves using one regenerative dose OSL signal. The gSGC provides a possible method for obtaining the D_e value of the sample efficiently and quickly. However, due to the radiation dose rate, operating procedures and instrument error and the selected regenerative-dose normalized dose value, etc., each laboratory should develop their own gSGC which has unique parameters. This study established the gSGC curve and measurement process of our laboratory, and then compared the consistency of the equivalent Dose (D_e) values from gSGC and SAR methods. In gSGC procedure, the D_e value of an aliquot can be estimated from the nature signal, one regenerative dose signal and their corresponding test dose signal. It will speed up the optical dating measurement rate of our laboratory and provide reference to establish gSGC in other laboratories. It is found that in the low dose range (0~100 Gy) the obtained D_e values were well consistent by gSGC and SAR methods. There were obviously differences in the higher dose range (>100 Gy) compared to the SAR results. It may be due to the insufficient number of older samples used to fit gSGC in this study. It is necessary to gradually accumulate more samples to improve the gSGC parameters in the future work. For some aliquots, individual quartz grains do not follow the global standardised growth curve, which leads to some deviations of D_e from gSGC. However, these two methods could obtain the similar average De value when multiple aliquots measuring.