“数字海底”系统建模中的关键技术研究

基于“数字海底”系统的理论基础研究和在海底科学应用中的具体实践,提出了“数字海底”的涵义、系统组成和体系结构,对空间数据管理技术、基于XML的WebGIS空间数据表达技术、复杂海底三维建模技术、多源信息的一体化集成显示技术、虚拟现实技术等“数字海底”系统建模中的关键技术进行了探讨,为从事海底资源研究和开发的人员提供各个层次的参考或帮助.     

基于分块分形编码的多姿态、表情人脸图像检索

利用图像分形编码中定义域块和最小均方误差一一对应的特点，提出了1种基于分形编码的多姿态、表情的人脸图像检索方法。该方法将待检索图像分割为相同大小的值域块，然后将每一值域块按给定的定义域块进行分形编码，得到最小均方误差，计算该最小均方误差与图像库中最小均方误差的欧氏距离。将待检索图像所有值域块的欧氏距离求平均，此平均欧氏距离较小的几幅图像即为检索出的图像。实验证明该方法能够准确地检索出图像库中存储的同一人的不同姿态、表情的图像。     

南沙群岛珊瑚礁地貌图像信息管理系统

运用面向对象的软件开发技术,结合珊瑚礁地貌学、计算机图像学和计算机信息管理技术,在Windows平台上研制开发出南沙群岛珊瑚礁地貌图像信息管理系统。该系统集文件管理、数据库管理和图形、图像管理于一体,具有信息检索输出、信息编辑和信息维护等功能,以图形用户介面交互,达到"所见即所得"的效果。     

基于特征提取的目标变化检测方法研究

针对不同时相遥感影像中特定目标的变化,研究了基于特征提取的目标变化检测方法。该方法首先根据目标的几何特征进行检测与提取,然后对提取出的两目标影像进行比较,得到特定目标的变化。实验结果表明该方法对特定目标的变化检测有较好的效果。     

亚像素定位的关键问题研究

分析了控制点标志的选择与设计,采用了图像处理、Hough变换、角点与直线高精度定位算子等方法,实现了中南大学近景摄影测量二维控制场1 350个人工标志点的自动识别和亚像素定位,仿真图检测平均精度达到±0.05像素。     

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.     

海洋测绘中影像图与港口航道图的镶嵌技术运用

文中介绍陆地影像图与港口航道图镶嵌的制图工艺,影像图与港口航道图镶嵌后的成图质量评价。简单阐述了作者在绘制该图种过程中的一些体会,以及影像图取代现有港口航道图上陆地地形的可行性。     

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.     

悬浮沙激光散斑图像处理的研究

本文以统计模式识别为基础，阐述了图像处理在悬浮沙粒粒径流量中的实际应用，提出了用图像层析来确定放大系数的方法，提出了测量的准确度。     

A Sensitivity Analysis of the Waterline Method of Constructing a Digital Elevation Model for Intertidal Areas in ERS SAR scene of Eastern England

A sensitivity analysis of the waterline method of constructing a Digital Elevation Model (DEM) of an intertidal zone using remote sensing and hydrodynamic modelling is described. Variation in vertical height accuracy as a function of beach slope is investigated using a set of nine ERS Synthetic Aperture Radar (SAR) images of the Humber/Wash area on the English east coast acquired between 1992 and 1994. Waterlines from these images are heighted using a hydrodynamic tide-surge model and interpolated using block kriging. On 1:500 slope beaches, an average block height estimation standard deviation of 18–22 cm is achieved. This rises to 27 cm on 1:100 slope beaches, and 32 cm on 1:30 slope beaches. The average heighting error at different slopes is decomposed into components due to waterline heighting error, inadequate sensor resolution and interpolation inaccuracy. It is shown that, at 1:500 slope, waterline heighting error and interpolation inaccuracy are the main error sources, whilst at 1:30 slope, errors due to inadequate sensor resolution become dominant. The ability of the technique to generate intertidal DEMs for almost the entire coastal zone in a complete ERS SAR scene covering 100×100 km is demonstrated.